1
vote
1answer
14 views

turn off wifi during certain hours

I want to restrict access of a laptop and allow it in certain hours only, with a password of course. router is linksys WRT160N, but access restrictions doesn't work firmware: v1.52.0 here's what I ...
0
votes
2answers
33 views

Two Routers - 1 Port Straight to First Router

At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I ...
0
votes
0answers
18 views

How do I open Google Hangouts ports on my home router?

I found this article to optimize Hangounts: https://support.google.com/a/answer/1279090?hl=en I'm supposed to open up a UDP port range for best results. I have a Linksys E3200 router which has a port ...
0
votes
1answer
72 views

Limited WAN speed through Linksys E4200 running DD-WRT

Today we have upgraded our internet connection from 90 Mbps to 180 Mbps, only to find out speedtest.net will not give a result higher than ~96 Mbps. If I connect directly to the modem, bypassing the ...
1
vote
0answers
31 views

Accessing a FTP Server

I am facing a baffling problem. For the past month I have used an FTP server, running Ubuntu Server 14.04 and it has worked flawlessly. During that time I was using an old Apple router from the early ...
2
votes
1answer
95 views

Configure DD-WRT router behind a Cisco cable modem

I have a Linksys WRT54GS router flashed with DD-WRT that I'm trying to get a connection on behind a Cisco DPC3010 cable modem. I can get a connection just fine when I plug my computer in directly ...
0
votes
0answers
11 views

confusion on QoS features on linksys

I own a linksys WAG120N router at home which connects a few computers to each other and to the Internet. I typically stay so close to it and using cat 5 between my laptop and the router. My sis ...
0
votes
0answers
31 views

Reading Linksys EA3500 Configuration File

Is there a way to view the configuration of a Linksys EA3500 from a .cfg backup of the router's configuration? What I mean is, can I open the backup file to view the configuration settings of the ...
0
votes
0answers
27 views

How to get CSipSimple working correctly with a linksys WRT54GL?

I have a linksys WRT54GL. I go VOIP with MicroSIP on my PC (and other softphone). I have an Android phone with CSipSimple installed, it works correctly on most network, but not with my linksys ...
0
votes
1answer
252 views

Configuring a Wired Access Point - Linksys WRT54G

For the last few weeks I have been trying to configure a wired access point. Eventually I want this to be wireless, but I thought best start with wired. Below are some details Hardware Broadband ...
0
votes
1answer
47 views

Linksys automatically disconnects all devices

I have been facing this problem for the last 15 days, every two days or so the linksys modem disconnects all devices and doesn't not connect until I reboot the router. What is causing this and how do ...
1
vote
1answer
39 views

Running a Web Server Over My Network

I am hoping to run a small web server on my computer to let other people in my house access it (common tips, etc.) and that would be easy enough to do and host at my IP address http://192.168.1.100 ...
1
vote
1answer
94 views

Will the dd-wrt Big build run on my Linksys WRT54GL?

I have a Linksys WRT54GL access point acting as a NAT router, with the inside network being my house's wireless and the outside network being a point-to-point link to my DSL gateway. My ISP is Telmex ...
1
vote
1answer
131 views

How can I store and Analyze my Linksys Router's Logs (ea6900)

This passed week I had a very strange issue occur. Normally there in no issue with our router (linksys ea6900) however on tuesday it continually crashed. After around 5pm it stopped crashing (it ...
1
vote
0answers
187 views

How to login to a website with no username when using lynx?

I'm trying to login to a linksys router web interface using lynx. From what I understand, if I use the command lynx -auth=username:password http://192.168.1.1/ I can login with basic http ...
0
votes
1answer
282 views

Router using different ip address when modem is in bridged mode

I have a zyxel modem/router that is blocking my voip, and so I want to put it into bridge mode. When in bridge mode, I use my own router, and my voip works fine. We have 5 static ip addresses at our ...
2
votes
1answer
59 views

Connect to VPN at Router end?

I have a Linksys E1200 router. I would like to enable my Wi-Fi and wired network broadcasted by the router to have VPN connection (either L2TP, PPTP or IPSec is fine). Is that possible to do so? or ...
0
votes
0answers
93 views

Router issue with Linksys EA2700

I have a linksys EA2700 router and I'm running into an issue where every night at around 10:00 PM usually, my router becomes extremely sluggish. During this time loading a page can take 2-3 minutes ...
0
votes
1answer
125 views

Router serving as DMZ host at the same time

My Linksys EA6700 wireless router supports DMZ. To configure DMZ I need to specify a DMZ host. As far as I understand, the DMZ host is a server which can be accessed from the Internet. As I have a ...
1
vote
2answers
384 views

How to create a subnet at home with Linksys router

My home network consists of my ISPs router (Thompson TG585 v8) which is giving out both WIFI and Ethernet LAN connections on the 192.168.1.x range. The router's LAN address is 192.168.1.254. This ...
0
votes
1answer
239 views

Slow copying files from Linksys EA6700

Copying files to the external hard disk of the Linksys EA6700 WLAN router via LAN is about 3 MB/s, but copying it back via LAN is only 250 kb/s. One file, file size ~ 10 MB. It doesn't matter which of ...
1
vote
1answer
1k views

No DHCP Lease with a new SB6141 Modem and a Linksys Router

I'm trying to help a friend remotely with an internet connectivity problem. His internet went down this morning and the cable company had him switch to a Motorola Surfboard SB6141 modem from an older ...
0
votes
1answer
90 views

Linksys admin password change with special character

I just changed my Linksys router (WRT110, latest firmware 1.0.07) password to one containing one special accented character (é in this occurence), among the 22 characters (all others lowercase ...
2
votes
1answer
427 views

I set my router to only allow access through HTTPS, and now I can't access it. Can I fix this without resetting the router completely?

I have a Linksys E1000 router that I access through http://192.168.1.1. I set it to only allow access through HTTPS, and now when I try to access it through the web interface at https://192.168.1.1 in ...
0
votes
0answers
93 views

Failed to upgrade to a newer version in DD-WRT on my Linksys Wap54g. What now?

I failed to upgrade to a newer version in DD-WRT on my Linksys Wap54g through Web Interface. The first upgrade from Linksys to DD-WRT through "TFTP client" was successful. Now again uploading DD-WRT ...
0
votes
1answer
201 views

WRT160Nv3 Linksys router running v3.0.03 firmware webinterface becomes unavailable

We have the latest firmware and have 20mbit up and 20mbit down internet. We have about 20 devices connected with utp and some wifi. After a while the webinterface (192.168.1.1) becomes unavailable ...
1
vote
1answer
724 views

Should a wired router be noticeably slowing down an Internet connection?

I have a fairly old (maybe ~8 years) Linksys Etherfast BEFSR81 V3 10/100 wired 8-port router. Under my old cable internet plan, I would get about 15Mbps on any device using the router, which I figured ...
-1
votes
1answer
125 views

Equivelent to D-Link Virtual Server for Linksys

I used to use a D-LINK DIR-825 router. It had a feature called "Virtual Server List" where I would forward specific public ports to specific private IPs and ports (see below image). I know have a ...
0
votes
1answer
120 views

Values below “Starting IP address” in linksys router.

In my basics setup in linksys router, I've set Starting IP address to 192.168.1.100. How can you explain that in ARP/RARP Table I can see users with addresses 192.168.1.25 and 192.168.1.26?
0
votes
1answer
109 views

Linksys RVL200 VPN Connection w/ Windows 8 w/o 3rd Party Software

I own a Linksys RVL200 VPN router at my office. I used to be able to tunnel in using Cisco's software but I recently switched to Windows 8. As of right now, the same Cisco software apparently does ...
0
votes
1answer
100 views

Timeout on specific domain when using Linksys WRT54GL router

I cannot access http://download.blender.org from within my home network. I have Linksys router (WRT54GL) switching into 2 PCs with ethernet cable and also wireless enabled (which I use in my Android ...
1
vote
0answers
115 views

URL for linksys WRT54GS firmware upgrade

I am trying to "recover" from a bad firmware upgrade on my Linksys WRT54GS. I can ping the router, and I can even get part of the web gui - but only parts of it - it's quite garbled. I can go to ...
4
votes
4answers
183 views

How to change associated country with Linksys E1000?

I got a new router (Linksys E1000) which came from Dubai. I've successfully set the timezone on its configuration to the correct one (GMT +8) for Philippines (where I am at right now). The problem is, ...
-1
votes
1answer
878 views

Linksys Router not working properly

I have a Linksys WRT54GH wireless router that I bought 3 years ago. When I try to connect to the internet, SOMETIMES it shows full signal but limited conectivity(with that annoying yellow triangle) ...
0
votes
1answer
158 views

AE6500 Linksys router Print Server functionality

I recently acquired the AE6500 Linksys router to replace an old switch in order to share 2 printers among 4 computers. My previous method of sharing was the both printers were connected to a single ...
0
votes
0answers
560 views

WRT54G Port Forwarding won't work

I am trying to set up a Plex Media Server and it needs to forward port 32400. It attempted to do so automatically using UPnP. That failed so I attempted to forward the port manually using the router ...
0
votes
1answer
245 views

Router “ghost” connections

My Linksys WRT54GS2 V1 has begun to display ghost wired connections in the last weeks. As you can see from the images I have nothing connected except for the power cable. I have tried a hard reset ...
0
votes
1answer
244 views

Remote access Linksys WAG200G, not through WAN

I have a network based on a SpeedTouch 706 modem/router, provided by my ISP. It is not possible to turn off NAT or DHCP on this device. Since it lacks wireless functionality, I added a Linksys ...
0
votes
2answers
5k views

Trying to set up a second router as a repeater

I have a Linksys e2500 running as my main router. I don't get wifi in my room, so I am trying to connect a second router to extend the range. Right now, I'm trying to figure out how to set up my ...
2
votes
1answer
2k views

How do I configure my wired router to get its internet connection from another computer?

I'm connected to the internet wirelessly (via xfinitywifi) on one laptop and I want to share that internet connection via a Linksys BEFSR41 wired router. So far, I've tried to connect the ethernet ...
1
vote
1answer
157 views

Why can't I access internet via my router?

I have a Linksys E3000 router that I'm trying to set up. I've connected the cable from my ISP to the Internet port of the router, and accessed its GUI via the wireless connection (had no other cable). ...
1
vote
1answer
73 views

Wireless G vs N Network

Just wondering if anyone could tell me any tips about a router issue. I previously has a Linksys G network router and ended up having some issues with it as it was getting older. I went out and ...
0
votes
1answer
204 views

WEP Passphrase mode on Linksys BEFW11S4

I have an old Linksys BEFW11S4 that I am using for LAN file transfers when I am on the road and my phone has a 3G connection. It has an option for WEP security, but it defaults to converting a ...
0
votes
0answers
156 views

Access router from ADSL modem

I have the following set-up: Linksys WAG320N modem-router connected to the internet via RJ11 Gateway IP for WAG320N is 10.0.1.1, subnet mask is 255.255.255.0 Static IPv4 address for my EA6500 router ...
0
votes
1answer
4k views

Send message to all computers connected on my Linksys router

Is there a way I can configure my router to be able to send message to all computers connected to it via WiFi. For instance i tried using msg * "Message" however it seems no one is getting any. I ...
0
votes
0answers
441 views

Linksys router webpage/control-panel inaccessible

I tried to access my WRT120N's webpage through the default 192.168.1.1 (LAN connection). Not being able to login (I'm unsure if I ever changed it from the default though), I did a hard reset on the ...
0
votes
1answer
151 views

Linksys Router Remote access to LAN network, Static Routes

I am trying to set up remote access to a controller on my LAN-side network from off-site. I can hit the remote access page of the router, but I am unable to hit any of my equipment on the LAN side ...
0
votes
1answer
100 views

Is there any reason to upgrade from a Linksys WRT54G from a security perspective?

I'm currently running a Linksys WRT54G with the latest firmware. I was recently thinking about newer routers and I realized that aside from new features (usb drives, media, etc) and faster speeds ...
1
vote
0answers
316 views

barebones features for a DD-WRT router acting as PPTP server

I have a little router (Linksys E900) only to act as a VPN server. I have a decent router behind it, handling radio anyway. So I am happy to relegate any other CPU-intensive stuff to the bigger ...
-1
votes
1answer
73 views

How do I raise the ping of one of my ports on my Linksys Cisco WRT160N v2 Router?

I'm a real newbie when it comes to computers, internet, networking, etc. but I'm an avid gamer. And I play a game (on my PS3) which plays best at a higher pings (slower speeds) for some reason beyond ...