0
votes
0answers
40 views

Can't connect to netgear N750 router used as bridge for FiOS router

A long time ago I set up my netgear router as a bridge for my main router, using some ethernet cables and ethernet-over-power adapters. I set the netgear router's ip to 192.168.1.2 so it wouldn't ...
0
votes
1answer
272 views

Can't Connect to PPTP VPN When Using NETGEAR N300 Router

I'm running Ubuntu 14.04, and I'm able to connect to the VPN on other networks, just not the one in my house. I'm pretty sure that my router is blocking the connection. How can I fix this? Output ...
1
vote
2answers
51 views

FVG318 used as a Wireless Access Point

My apologies in advance: I am a software developer with just enough networking knowledge to get into trouble :) So I had a cable modem/router setup through my ISP right in my office. They sold me on ...
1
vote
0answers
263 views

Redirecting IP (8.8.8.8 to ISP's dns) using netgear router with busybox

Here's the high level version of my problem: I have a chromecast and my ISP blocks all DNS traffic that's not theirs. I want to redirect 8.8.8.8 and 8.8.4.4 to my ISP's DNS. Information: Router ...
1
vote
0answers
457 views

Why won't my DHCP addresses “stick”?

I've been having some addressing issues that I've been unable to solve, and I'm hoping I can get some guidance about other things to research. Service provider is Time Warner cable. A static IP is ...
0
votes
0answers
96 views

Netgear WNDR4000 open port 53

Why is port 53 open on the WAN side of the router? And more importantly how do I close it? Port 53 is not one of my forwarded ports. Discovered by doing nmap -pT:1-64 <my-external-IP> -Pn ...
0
votes
1answer
501 views

No computer on network can play YouTube videos

I have a Netgear FVG318v1 router and all computers on the network cannot play any YouTube videos. I have tried with 3 computers, PC and Mac with all different kinds of browsers. All I get from YouTube ...
0
votes
2answers
1k views

Repeatedly high ping - caused by WiFi or provider?

I have an ISP with a 10gbit broadband connection. I can usually download with about 1.8mbytes/sec, so that's not a problem. However, I sometimes have a very high ping in online games (> 200ms). It ...
0
votes
0answers
82 views

Netgear WNDR3400v2 (Latest Firmware): Dashboard incorrectly displays “no internet connection” status

What would cause my router to list the internet connection status as "not connected" even though my connection is functioning normally? I have access to the internet as well as all devices on my ...
1
vote
1answer
1k views

Why can't I access iis locally with NetGear B90-7550 ADSL Modem/Router

I realize that getting an answer to this question is a long shot, but I have been wrestling with this for three days so far with no luck. I recently installed a new DSL Modem/Router sent to me by my ...
2
votes
1answer
684 views

Changing netgear router telnet root password

I have a Netgear JNR1010 router but I am not able to change the router's root password. Router Firmware Version is 1.0.0.18 I tried multiple commands in the Busybox console that came up, BusyBox ...
3
votes
1answer
2k views

How to redirect/reroute DNS requests on a Netgear N600 router

I'm trying to use Chromecast in Canada and it works well. The only problem is that I'd like to use a custom DNS service which gives me access to Netflix content from other countries. This is however ...
1
vote
1answer
714 views

How do I change my router's region?

I asked a question about my 5GHz range being extremely short on my NETGEAR WNDR4300 Router. I got this answer, basically telling me to change the region my router is located. However, the region ...
0
votes
1answer
1k views

Connecting WNDR3700 Netgear router as a switch [duplicate]

I recently moved over to Verizon FIOS and I must use their router. So I want to try to use my old Netgear router as a switch (no wireless) for additional ports. I connected the main router into a LAN ...
1
vote
1answer
962 views

Wireless router lods reporting loads of DoS attack attempts

We're having intermittent connectivity issues with our ADSL at the office. We've been dealing with our ISP for weeks and they don't know how to fix our problem. What happens is that at multiple times ...
0
votes
0answers
252 views

Updating the Firmware on a Virgin Superhub

A long time ago, I was with Virgin Media for my internet. Since then, I have moved on, but as I was never asked to return the router, I still have it, so I have integrated it into my (non-virgin) ...
0
votes
1answer
421 views

Why does my netgear WNR 1000 router keep giving the wrong IP address?

For a while my internet has stopped working. My house has two routers, one for the wifi which is a Belkin and the other for routing wired connections for home entertainment systems which is a Netgear. ...
0
votes
2answers
4k views

Trying to set up a second router as a repeater

I have a Linksys e2500 running as my main router. I don't get wifi in my room, so I am trying to connect a second router to extend the range. Right now, I'm trying to figure out how to set up my ...
1
vote
1answer
1k views

How to configure IP forwarding on Netgear N600 WNDR3400 router

I've got a Netgear N600 WNDR3400 Router at home. Is it possible to create a virtual hostname on my home network and have it forward to specific IP's of my choosing? For instance, create a virtual host ...
0
votes
2answers
275 views

Netgear Router Port Forwarding corrupt after updating

I just updated the firmware on the WNR1000v3 router. However all the port forwarding configs that were set up previously have become "ghosts". They do not show up on the list nor work, but I cannot ...
0
votes
1answer
63 views

How to retrieve the WIFI key from Netgear assistant software?

I am attempting to setup an additional computer on an office WIFI, but do not know the WIFI key. There is a computer already connected to the WIFI and it uses the net gear wd111v2 wireless assistant ...
1
vote
1answer
740 views

Netgear WNR2000 as repeater for Cisco/Linksys E3000

Can I use a Netgear WNR2000 as a repeater for Cisco/Linksys E3000? My setup is: Time Warner Cable Internet > Motorola DOCSIS Wireless Modem > Linksys E3000 Router This is upstairs. Downstairs I have ...
1
vote
1answer
72 views

Wireless G vs N Network

Just wondering if anyone could tell me any tips about a router issue. I previously has a Linksys G network router and ended up having some issues with it as it was getting older. I went out and ...
0
votes
0answers
553 views

WNDR4500 DHCP Passthrough not working

I have a 2Wire Internet gateway with DHCP running. I have added a NetGear WNDR4500 to provide Wireless N and network attached storage (USB via WNDR4500). I have a media server connected to the 2Wire ...
0
votes
1answer
234 views

Netgear DG834Gv3 ADSL router dropping Rackspace VPN connection intermittently

I have a Netgear DG834G v3 ADSL router which I have had since early-2007. When I work from home I connect to office networks on a Win7 machine via a Rackspace-provided VPN using Cisco System VPN ...
1
vote
0answers
476 views

Netgear Router VLAN setup

I recently had a fibre connection installed, and as per usual it comes with a crappy router which I wish to replace. The provided setup is a fibre modem (Huawie HG8240) with WAN output to the ISP ...
0
votes
2answers
148 views

Router's web based control panel gone

We have a Netgear FVS336G router in our network that was accessible through 192.168.2.1 in web browser before. When I was connecting to IRC services such as freenode, they used to ban me because ...
2
votes
4answers
3k views

How much power does the Netgear WNDR3800 (N600) router consume?

I am interested in the actual (i.e., measured) power consumption of a Netgear WNDR3800 router (also known as N600 wireless dual band gigabit router) I couldn't find any reliable indication online, ...
-1
votes
1answer
1k views

Server IP must be a LAN IP (Port Forwarding Netgear)

I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port ...
2
votes
0answers
675 views

Trying to connect a Dlink DIR-615 router to a PPTP VPN from behind a Netgear WNDR3700

I have two routers: a Netgear WNDR3700 and a DLink DIR-615 (rev H2) Both are using stock firmware. The Netgear is my primary router (192.168.0.1/24). I'd like to set up the DLink (192.168.2.1/24) to ...
0
votes
0answers
349 views

How can i make my Netgear WPN824V2 Router more secure?

I realize, in the research I have done so far, that the memory to import into this router is too low to run any custom firmware, it is updated to the current newest firmware. But my problem is that ...
0
votes
2answers
3k views

DG834G V3 Custom Firmware

Hopefully someone has configured this before - I'm in the process of flashing the DGTeam custom firmware for the Netgear DG834G V3 router (my spare one !) but now it's done, I've no idea what IP the ...
1
vote
1answer
223 views

Why is this access point not functional on my home network?

I have a Linksys WRT54G as my primary router, and it's hooked into the modem, and everything with that is groovy. Additionally, I have a NETGEAR WG602 which is meant to give internet to the upstairs ...
0
votes
1answer
726 views

Netgear wnr2000v3 - no internet connection

I bought a Netgear wnr2000v3 about a year ago and everything was running fine for months. There are 8 devices connected to the router, 3 directly connected, 2 over wifi and 3 passing a switch. Now, ...
1
vote
1answer
1k views

How to use Netgear WGT624v3 as wireless bridge?

I would like to use my router as a wireless bridge. I think this is most simplified by installing the tomato firmware on the router. I followed This guide to put tomato on my router and it failed. ...
4
votes
3answers
6k views

How can I increase my wireless signal to reach the camper in the back yard?

I have a camper in the back field of my house. I use it as a guest living quarters for family. It is connected to the electricity for the property, and also I have ran aprox a 200 foot ethernet cable, ...
0
votes
5answers
3k views

Why can I connect to a device in my network with an external address but not an internal IP?

We have a Y-cam Black CCTV camera that is connected to our network. It was initially connected by a LAN cable for the setup, and once that was done we left it to use the wireless connection. When ...
0
votes
0answers
309 views

NETGEAR Router Becomes Unresponsive Frequently

I have a Netgear WNR3500v2 router that becomes unresponsive frequently (once a day or so); all connections through the router drop and all pings to the router time out. New computers timeout when ...
1
vote
2answers
197 views

Configuring a VMDG280 router to point to an internal web server

I have a netgear VMDG280 router. I have a static IP address. Anyone know how I can configure this router so if I type in my IP address, it shows me the same apache ready webpage as I get when I go ...
0
votes
1answer
1k views

Multiple Netgear GS608 V2 Problems

My network consists of: Netgear DG834N ADSL Modem (4 port) Connects to... Netgear GS608 V2 8 Port Switch This has 1 PC & a NAS drive connected to it. It then has a Cat6 cable connecting it ...
1
vote
0answers
192 views

Distributing internet access over a small network using Netgear switches to separate user groups [closed]

Here's the setup: in a small office, I have a Netgear DG834 router, with one port hooked up to a GS105e switch, which has 2 PCs and a printer connected to it. A second router port is connected to a ...
0
votes
1answer
191 views

Router used as ethernet bridge wont show up

I have a Netgear router in my living room that has the wireless signal. It is connected to a Powerline plug that goes up to my bedroom. That is plugged into another router that is used as an ethernet ...
1
vote
1answer
736 views

Does DD-WRT improve reliability?

I recently bought a Netgear WNDR3400v1 router, and have been having reliability issues (devices constantly being disconnected and reconnected). My router is supported for DD-WRT. I understand that ...
1
vote
3answers
20k views

How to add a printer to a Netgear router's LAN

I just bought a HP wireless printer and am trying to connect it to my home network so any connected PC can print to it. The network is "served" from a Netgear WGR614v7 wireless router. When I go into ...
-1
votes
1answer
511 views

Zeppelin Air wireless connection through Netgear router [closed]

my laptop can not connect the Zeppelin Air (B&W) ? Please, is there somebody that can give me some decent advice ? Thanks
0
votes
0answers
1k views

How do I attempt stop DoS attacks: Smurf on Home PC

Basically, can anyone tell/assist me on how to make my NETGEAR N 300 Wireless Router stop forwarding broadcast directed traffic to the network? So the problem is this: I've been receiving DoS attack: ...
1
vote
1answer
2k views

Netgear WNDR3700 2.4GHz and 5GHz Wi-Fi are segregated

I have a Netgear WNDR3700 with both the 2.4GHz (B/G/N) and 5GHz (A/N) broadcasting. I'd assumed that devices connecting on either channel would work together without issues, but there are some devices ...
0
votes
0answers
499 views

DHCP Discover with no Client Identifier (Internet Radio incompatible with Netgear and Linksys routers)

I have a Sangean DDR-63 internet radio (innards made by Frontier Silicon). If I use my Verizon WiFi cellular modem hotspot it works fine (but that's expensive). Connected directly to my cable modem ...
0
votes
0answers
2k views

How to confirm that a wireless router is working properly?

My router (Netgear dgn2000) LAN works, but not my wireless. The wireless light shows up when first booting and sometimes when I reset, at least for a few seconds, then dies out. I had my Kindle out ...
0
votes
1answer
309 views

Dual-band wireless and multiple connections (Netgear N600)

We have a Netgear N600 Dual-Band wireless router. Both antennae are being broadcast at the moment. I am assuming that both antennae have there own NIC, because there are 2 Mac addresses posted on the ...