0
votes
0answers
31 views

Why does Windows 8.1 prevent my wifi adapter from connecting to my 802.11n wireless network?

I tried upgrading my mom's PC to Windows 8.1 and it wen't smooth for the most part except I could not connect to the wireless network anymore. The driver for the wireless adapter was installed (tried ...
0
votes
0answers
43 views

Why is it that a single device can bring down an entire network?

I manage our shops network, and twice in the last year a single device has completely killed our network. When this happens you can't even access the router until you find/unplug the device and ...
0
votes
0answers
23 views

Configure network to have good multiplex

I have some Macs connected to the internet through a Netgear router. All use a wireless connection. I also have an AirPlay speaker connected wirelessly to the same router. A smart TV is also ...
0
votes
1answer
9 views

FritzBox router as a WLAN access point behind cable router - can't access NAS attached to cable router

I have a FritzBox 7270 v3 as a WLAN access point for my mobile devices. This box is attached via LAN to my cable router (Hitron CVE-30360) as well as my NAS (QNAP TS-421). My NAS and my cable router ...
0
votes
0answers
18 views

Packet loss while using a router

I have a broadband internet connection. I am connecting to the internet Using PPPoE connection. When I connect to internet using my PC it works perfectly. But when I try to use a router to connect to ...
1
vote
0answers
11 views

Why would wifi router suddenly start having a bad connection for only one of the connected devices?

My home connection consists of two OSX Mavericks laptops connected to a Motorola box that functions both as a wifi router and a cable modem. About a month ago, we started seeing problems. The ...
0
votes
0answers
22 views

Tp-link tl-wr740n wifi stops working after several minutes

My friend has a tp-link tl-wr740n router. His PC has cable connection and it's ok all the time. Unfortunately, there is a problem with wifi connection. After restarting the router he can connect to ...
0
votes
1answer
54 views

Multiple devices cannot connect to a TP LINK wireless TD-W8968 router

I've got a TP LINK wireless router, model TD-W8968. When we have lots of devices in the house (10 - 15, made up of laptops, iPhones, iPads etc.) we find that some devices can't connect to the network. ...
2
votes
0answers
53 views

“Safe” personal router use on apartment-wide network

I recently moved into an apartment with internet included in my rent. This was a boon at first, but now I'm feeling limited. To get devices connected (wired or wireless), I have to whitelist the MAC ...
0
votes
2answers
33 views

Two Routers - 1 Port Straight to First Router

At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I ...
0
votes
1answer
29 views

WiFi device speed priority

I am having a weird issue. I have a high speed internet at home and a WiFi router. I have two computers - my Sony laptop (win8) and my girlfriends Macbook. Somewhy when I am downloading something - ...
0
votes
1answer
45 views

How to access wifi router config page when it's in Bridge mode?

I have a TP-LINK wifi router (model TL-WA901ND) configured in Bridge mode plugged into my building's network. How can I access the config page of the router? e.g. I might like to adjust the wireless ...
0
votes
1answer
21 views

Acces second router configuration

I have 2 wireless routers: WAN --> Router1 --> Router2 My PC is currently connected to Router1 All connections are wired. Router1 is a TP-Link TL-WR841N; Router2 is an ASUS. I need to configure ...
0
votes
1answer
32 views

Map my router's public IP to one of my PC's in the wifi network

Suppose I have a public IP. If I enter that IP into any PC connected to the internet, it opens my Router's Admin panel and asks for it's username and password, fair enough. But is that possible ...
0
votes
1answer
42 views

New wireless router connected to existing router modem

My home wifi can often get randomly slow and unstable, and I've already upgraded with the only ISP that my town has. I got a deal on a manufacturer refurbished NETGEAR R6300 hoping it'll help. My ...
0
votes
1answer
239 views

Port-forwarding in router ZTE ZXHN F660: hidden settings

In my company, we have a ZTE ZXHN F660 router, and we need to do a port-forwarding to access a DB allocated in one of our machines through public IP. We have login into router admin page (visit ...
-1
votes
0answers
29 views

Does updating Billion router firmware return it to factory settings?

I have a Billion router that is more than five years old. I don't know and can't find out the model ID. It can't tell me the current connected devices or the bandwidth each device is using. I read ...
0
votes
2answers
41 views

What could cause an 802.11n access point with multicast activity to crash when a wireless client goes out of range?

I have a Raspberry Pi (running Raspbian) and an LB-LINK wireless USB adapter serving as an 802.11n access point with WPA2, running with hostapd and isc-dhcp-server. On the Pi, I have a python script ...
0
votes
1answer
79 views

Home Network is Inefficient and Slow

I have troubleshooted my network and I can't ever seem to get decent speeds. My router is a WNDR3400v2 (stock firmware, 802.11n, dual band) and I should be getting around 90 Mbps. Whenever I had the ...
0
votes
0answers
14 views

How to monitor ADSL2+ modem

I have thomson TG58547 ADSL2+ router to provide WiFy internet brodband, My router is working fine if its connected to only one device through WiFy but when I connect mobile to access WiFi it starts ...
2
votes
1answer
68 views

What's wrong with my home networking setup?

I have the following home network setup: Ground Floor Typical Wireless router which is connected to WAN/Internet and its LAN IP is 10.0.0.1. DHCP is ON with the address pool set to 10.0.0.100 to ...
0
votes
0answers
38 views

Access Transparent Router's Web Interface

A picture I made in paint is shown below which shows how my network is setup. The main router goes out to the internet. I connected a 2nd router to the main router in order to support older devices ...
1
vote
0answers
44 views

How to create a private wireless network off of public wifi?

My question is somewhat similar to this one, but that was never answered. Mine is different enough that I believe it warrants a new question. I am an organizer for an event coming up and we have some ...
0
votes
0answers
20 views

Disabling SSID from command line DD-wrt

I'm trying to disable/hide my SSID broadcast programatically in order to stop devices connecting to my access point (not for security reasons). I have tried renaming the SSID and setting it to nothing ...
0
votes
0answers
11 views

confusion on QoS features on linksys

I own a linksys WAG120N router at home which connects a few computers to each other and to the Internet. I typically stay so close to it and using cat 5 between my laptop and the router. My sis ...
1
vote
0answers
29 views

Is it possible to use a switch to connect a router to the upstream gateway and the computers over a single Cat6 cable?

I've just moved into a new house, and I'm trying to get the network setup to be the best I can. Currently my ISP supplies a router that I need to use, and that only provides a single port for the ...
0
votes
2answers
54 views

Static IP hosts on WiFi router with DHCP

I have two wired hosts (a desktop and a laptop) connected to a router that also has a DHCP server enabled for WiFi access. When I restart my wired machines, they get assigned a secondary IP address by ...
0
votes
1answer
24 views

How to connect hosts on one network to Internet connection on another network?

I'm not sure if I phrased the question correctly, so sorry for any confusion there. I have two routers. Routers are too far apart to connect them to each other using a cable. First is connected to ...
3
votes
2answers
80 views

Internet keeps dropping. 5 different routers have failed, changed modem, etc.

Sorry in advance for the long post. I've been working this issue for the past 4 months and I am at my wits end. I work for a small business that moved into a new office in December. When we moved ...
0
votes
1answer
40 views

How to connect BT Fibre HomeHub to a Netgear router

Situation is this: In the house I have a BT Fibre HomeHub3, connected together with a BT Openreach modem, works great in the house, no problem. To this HomeHub I have connected an Ethernet cable ...
0
votes
2answers
27 views

Trying to access a file share from a Wi-Fi router through a switch - can't see the share

So I've got a machine connected to Wi-Fi, and that Wi-Fi router is connected to the switch to get its internet access. That switch is where the machine with the file share is located. Other hard wired ...
0
votes
0answers
29 views

Reading Linksys EA3500 Configuration File

Is there a way to view the configuration of a Linksys EA3500 from a .cfg backup of the router's configuration? What I mean is, can I open the backup file to view the configuration settings of the ...
0
votes
1answer
29 views

Is my wireless AP broken?

I have TPLink wr741nd provided by my ISP so I cannot check the settings. Now the problem is I have really bad reception at my desk. I did some tests under same conditions, measuring with inSSIDer3 ...
0
votes
0answers
27 views

How to identify one router amoung multiple routers with same name?

I use windows 7. WiFi is enabled in my office. There is a static IP and a port, that we need to configure in the LAN Settings, under internet options to connect to internet. When connecting to ...
0
votes
1answer
33 views

3 routers, how to connect each of the 2 routers to the main one(older)

I have 3 different routers. One of the older ones is the main router which has the incoming connection from my internet provider. My question is if I want to connect the newest router (cisco) and ...
0
votes
0answers
28 views

How to receive signals of indoor router with outdoor router?

I bought a new TP-LINK TL-WA5210G outdoor router. But I don't know how to receive signals of indoor router TP-LINK TL-WR841N with outdoor router.
-2
votes
1answer
64 views

Router setup without internet connection [closed]

I have a neighbor who has recently purchased a consumer-grade drone and who is flying it around annoying the neighbors. Apparently the remote for the drone operates in the 2.4 ghz band and so I'd ...
2
votes
1answer
44 views

Modem+Router+Switch+Router connection in a LAN

What I am trying to do: I have 2000 users in a region. I have one modem and from that I connect a router now router can only grant access to the IPs between 192.168.0.1-255 BUT my users are 2000 what ...
0
votes
0answers
28 views

Indoor navigation Access Points or WDS (WiFi Repeater)

I want to attempt a small in-door WiFi navigation project I have no problems regarding programming but I'm lost on the Networking part. Basically what I need is WiFi routers under same network name ...
0
votes
1answer
48 views

Repurpose a cable modem/router as merely a router

Please bear with me - I'm unclear about much of the terminology used in home networking. The scenario: I would like to set up a wireless network. I live in a shared house where internet service is ...
0
votes
2answers
48 views

DD-WRT and 2 virtual interfaces with each dedicated to N or G

Can virtual interfaces be setup with DD-WRT to be dedicated to a specific protocol? I have a Wireless G printer and I've noticed that when my router is set to "compatibility mode" my throughput tanks. ...
0
votes
1answer
41 views

Wake On LAN with TL-WR710N in Client mode?

I have a pocket router TL-WR710N from TP-Link configured as a WLAN Client for my PC. The WLAN Client logs into the WLAN of my router, while the PC is connected via Ethernet to the TL-WR710N. I can use ...
0
votes
0answers
16 views

Diagnose intermittent drop in wifi

I have my computer and game console connected to a router which is acting as a repeater for the wireless signal from our cable modem. The signal is almost always fine, but I will occasionally be ...
0
votes
1answer
35 views

How do I connect to the internet from a dd-wrt router plugged into a modem-router combination?

I've got a cable modem (A) which is also a wireless router and a dd-wrt wireless router (B). I've connected (B)'s "internet" port to one of (A)'s local ports. I can connect to (B) over the air just ...
2
votes
1answer
141 views

What happens when I plug a router into another router?

I've recently switched ISPs, and the new one provided me with a modem (that what you call those things?) that doubles as a router. I used a router on my previous ISP for wireless networking, but I've ...
0
votes
0answers
39 views

How to properly cascade a Netgear router (using Tomato) with the ISP router/modem (Orange Livebox)?

I've been using my ISP's modem/router which is an Orange Livebox for the past. I now bought a Netgear WNR3500lv2 and installed Tomato (similar to DD-WRT) in order to have more configuration options ...
0
votes
1answer
58 views

How to make laptop (mac) to function as a router (with DHCP off)?

My ISP allows connecting only two devices. The MAC addresses of both my devices (MacBook Pro laptop and iPad) are registered with them. The problem is that I do not have a router, and the internet I ...
0
votes
1answer
72 views

Unable to reach access point

I followed these instructions to setup my Access Point. My Router is reachable via Wireless but non of my devices pick up any signal from the Access Point. The name simply doesn't show up. The ...
1
vote
0answers
118 views

Reflash DLink AC1750 Optimum Router

I recently got the new "smart router" from Optimum: DLink AC1750 It may be a good router but I cannot access any of the settings. When typing in the regular 192.168.1.1, it redirects to ...
0
votes
1answer
74 views

Use router as external high powered Wi-Fi adapter

I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external ...