Tagged Questions
1
vote
1answer
22 views
Only “lab” traffic over my Juniper VPN connection - all other traffic over normal Wifi/Ethernet?
How do I configure my Juniper VPN client to work like the Windows VPN client to not be the default gateway for all traffic?
0
votes
0answers
37 views
Route only some traffic over VPN
I would like only some programs/ports (namely IRC) from my Windows 7 computer to send traffic through a VPN while the other programs (web browsing, FTP, etc) should default to not using the VPN and ...
1
vote
2answers
81 views
Juniper VPN forces my traffic via the corporate proxy - can it be undone?
When connected to the corporate VPN from home, all the traffic is redirected to go via the corporate proxy, effectively blocking sites that I want to use freely when I am at home, and slowing down ...
0
votes
0answers
138 views
RRAS PPTP VPN Connected but not get ping my local LAN
Two days back i had configure RRAS VPN server on Windows server 2008 Std R2 with two (LAN (192.168.100.173 with 255.255.255.0 subnet, without gateway,no DNS -- only ip Address was there) / WAN ...
0
votes
0answers
83 views
Routing eth1 to ppp0 (PPTPD VPN)
I have some problems connecting a Playstation to my VPN via another PC.
Hardware: PC that should route incoming traffic from the Playstation to VPN: eth0 - connected to the internet eth1 - connected ...
1
vote
1answer
114 views
Ubuntu Server is not routing packets of my vtun VPN
I have an Ubuntu 12.04 LTE virtual server, kernel 2.6.32, and a VPN with vtun running.
In the VPN, the server is 6.6.6.6, and the two clients are 6.6.6.29 and 6.6.6.35.
If I ping 6.6.6.6 from any ...
1
vote
2answers
168 views
How to ensure Internet access is only via VPN [duplicate]
I have a Windows 7 machine with a regular wired Internet connection, configured via DHCP. It has a VPN connection set up. How can I ensure that Internet access is allowed only over the VPN? That is, ...
0
votes
0answers
87 views
Get Internet through VPN server having a public IP.
I want to connect clients to VPN server and access the internet through the server.
My scenario is below.
The windows 2003 server has a Public IP, say 222.236.265.45 which i need to configure as VPN ...
0
votes
0answers
228 views
Using a VPN, how do I send UDP packets to, and receive broadcast packets from, the other network?
I need to forward UDP packets through a VPN connection. Usually this is not supported when the destination address is the limited broadcast address or a network broadcast address. But the Wake-on-LAN ...
0
votes
2answers
1k views
Why can't my OpenVPN client access machines on same LAN as OpenVPN server?
I have configured OpenVPN on my Linux server and Windows client according to the instructions here. My client can access the server, but can't get any further onto the LAN.
My Server is ...
-1
votes
1answer
70 views
is RDC-via-RDC faster than RDC-via-VPN? [closed]
I always assumed that a remote desktop connection is "just an application" (plus it runs a slow OS at its endpoint) so it would be slower than a VPN, which is "part of the backbone/underpinning" etc. ...
0
votes
1answer
774 views
OpenVPN Windows Server 2008 R2 Enabling NAT
I want to redirect all traffic through the VPN.
- server.ovpn:
port 1200
proto udp
dev tun
ca "C:\\Program Files (x86)\\OpenVPN\\config\\ca.crt"
cert "C:\\Program Files ...
1
vote
0answers
166 views
PPTP VPN connection disconnecting when accesing an IP over VPN
I have two PC lan behind a router. I am connecting to my company network through a VPN. I was not able to reach an IP, nor access the internet. The VPN connection would be disconnected automatically.
...
1
vote
0answers
65 views
how to Specify which physical interface the VPN interface should use, Windows7
I have two physical interfaces which both have internet connection different from each other, and I have VPN virtual interface. I want to specify for the vpn which physical interface it uses .. how is ...
1
vote
0answers
226 views
Route traffic from one VPN to a second VPN
I have set up an OpenVPN server on my windows 7 64-bit PC. I also have a subscription to a VPN service. My aim is to be able to connect my android phone to the VPN server on my PC, and then route ...
1
vote
0answers
424 views
Mac OS X Routing Table Protection
I'm looking for a way to protect my Mac OS 10.8 routing table. After connecting to my employer's network using the Cisco AnyConnect Secure Mobility Client, a bunch of new routes are installed into my ...
0
votes
0answers
145 views
Why has my RRAS connection disappeared after Windows update?
Ok so clearly the question should answer itself. We have installed some updates on our SBS server and upon restart our entire VPN setup is broken. I have been trying to troubleshoot the error as much ...
1
vote
1answer
214 views
Configuring sshd to listen to another address when VPN is on
The network setup is as follows:
Server --> VPN (no admin access) --> Internet (IP: V.V.V.V)
\(IP: 192.168.1.10)
\--> router --> Internet (IP R.R.R.R)
I am trying to access the sshd ...
5
votes
2answers
984 views
Linux routing and HMA
My setup is the following:
I have an ssh access to a distant machine, running the last version of Ubuntu Server edition, and I have to run a software on it "through" HideMyAss VPN (because this ...
1
vote
0answers
417 views
Routing a specific domain or range through a PPTP VPN and all others through direct connection in Windows 7
How can I route .website/ through a PPTP VPN, while keeping all other traffic going through my default connection?
I have tried using the Switchy! Chrome extension, but all my traffic is still being ...
0
votes
0answers
95 views
Mac OS X vpnd routing
I have a Mac running OS X 10.6. I would like to connect to it remotely such that my requests from the remote machine appear to come from the aforementioned Mac (my database server access is ...
1
vote
1answer
186 views
Routing Between Intranet and Internet
I have 2 ADSL Modems:
One is for intranet connectivity, the other is for accessing the internet.
I connect the intranet to my PC on network interface "Local Area Connection", and connect to internet ...
0
votes
0answers
62 views
How to route over VPN without getting the remote endpoint from the remote computer?
When I dial a VPN (using Windows RAS library, either through the GUI in the network section of Control Panel or programmatically), I use an IP/hostname of the destination to make the connection. When ...
0
votes
1answer
246 views
Routing a local host's default connection to VPN
I have a home LAN behind a Linux firewall connected to the Internet. The firewall also has a VPN connection to a remote host that can route traffic from the VPN to its Internet connection with NAT.
I ...
1
vote
1answer
52 views
Access Private NIC Through Public NIC
I am totally stumped. I have tried playing with the routing table but no luck.
I am using Windows 7.
I have a computer (#1) with two NICs (A and B). A is a wireless interface that connects to a WiFi ...
2
votes
1answer
445 views
Separating my VPN connection from my internet access
Background:
Home PC is Windows XP and using Cisco VPN client; home internet connection is fast (20MB)
office VPN router is Cisco RV110W; work internet connection is slow (1.5MB)
With VPN connected, ...
0
votes
0answers
290 views
routing to the internet outside an IPsec VPN tunnel
After establishing an IPsec VPN tunnel all traffic is routed to the remote endpoint, while I only need to route the packets destined to that internal network and still be able to access the Internet ...
1
vote
1answer
210 views
How do I switch between routers when connected via Ethernet?
I currently have a Windows 7 machine and a Ubuntu 11.10 media server connected via Ethernet to a router. This router (Router 1) is connected to a Singapore ISP which prevents me from accessing ...
3
votes
1answer
1k views
VPN routing issue in linux- how to make applications that can only bind to IP addresses work?
Right now I have a PPTP VPN set up on my remote ubuntu VPS. I would like to have certain applications use the VPN to access the internet (rtorrent, irssi, among others). Currently, it is set up like ...
4
votes
4answers
3k views
Prevent VPN from changing DNS on Windows 7 / 8 developer preview
I have a customer that uses a VPN connection, however it automatically configures my DNS settings to a non-existent DNS server, meaning every DNS resolution times out until the alternative is tried, ...
0
votes
1answer
817 views
Set linux routing tables to route F5 vpn and internet traffic
I'm having trouble understanding how my VPN client works, and how to set up my routing tables to do what I would like.
Here is the output BEFORE connecting to my vpn
Kernel IP routing table
...
1
vote
1answer
2k views
Change PPTP control connection's TCP port number
I have some Windows 7 clients that connect via PPTP to a CentOS server, but I would like them to use a port other than 1723 for the control connection as that port is not available.
Is there some way ...
1
vote
0answers
3k views
trick out cisco vpn with routes
I'm working on a way to trick out cisco vpn-client by modifying the routes on the local system to achive a status thats calles split-tunneling.
I know that I don't have the right to do this without ...
5
votes
2answers
2k views
Stop VPN being used on internet traffic on Win 7 [duplicate]
Possible Duplicate:
How can I make the Windows VPN route selective traffic (by destination network)?
How To Use Local Internet Connection To Access Internet While Still Connected with VPN
...
1
vote
1answer
653 views
Route via PPTP or VPN Depending on Application or Port
I want to use my primary internet connection (eth0) on my PC for all traffic, but route traffic over a pptp VPN for specified application/or port.
Details
eth0 = current internet port
pptp1 = VPN ...
2
votes
1answer
405 views
Linux PPTP VPN and gateway woes
I have an Amazon Linux machine running in an Amazon EC2 instance.
I am connecting to my office's VPN as follows:
sudo pppd pty "pptp pptp.<DOMAIN>.com --nolaunchpppd --loglevel 2 --debug" file ...
0
votes
1answer
731 views
How do I update my routing table to accommodate VPN without using remote gateway?
Windows 7 x64
I have a VPN connection to my work network. It works fine if I have the "Use default gateway on remote network" is checked, but I don't want that. I know I need to update my routing ...
1
vote
0answers
731 views
None of the clients of LogMeIn Hamachi mesh-network are reachable
For some reason my Hamachi network stopped working. Here is what I have
Version of the Hamachi client is 2.1.0.122
It's "Mesh" network.
I have 7 clients, 3 of them are online right now.
All clients ...
0
votes
1answer
311 views
How can a PPTD VPN route traffic to other servers on network?
I a have a number of servers which expose various public services to the web. These are behind a server which is acting as a firewall using IPTables and forwards traffic to and from the servers. All ...
1
vote
0answers
289 views
How to route through VPN only for one IP (OSX)?
I've gotta use a VPN as the first in several hoop-jumps into a client system, but this kills all other networking for me, which makes it very hard to get any work done :(
I only need to use the VPN ...
1
vote
1answer
135 views
PPTP VPN Setup Issue; forces restart
This is actually more of a router issue, and I really have no clue where it should go.
I've setup a PPTP VPN successfully, and when tethering through my phone, I can connect and disconnect from it as ...
0
votes
1answer
354 views
Vigor 2920 cannot reach linux LAN device from VPN or WAN after some time (timeout?)
Setup:
Gateway: Vigor 2920, Firmware: 3.3.6.1, 2 fiberlines, loadbalancing.
I have 2 XEN Citrix server with virtual Debian (DomU) running on the LAN. (PROBLEM)
Other devices running on the LAN: ...
2
votes
1answer
731 views
Connecting to resource on vpn, while normal traffic routes through normal connection
I'm running Windows 7 and am trying to connect to a specific IP on a VPN network that I'm connected to.
Since I don't want all Internet traffic to go through the VPN connection and I want to be able ...
1
vote
1answer
515 views
How does a MacOSX VPN connection route traffic by default?
I connect to a VPN from home to work. I use Mac OSX 10.6.x's built-in Cisco support to connect. There are no non-default settings after authentication (eg to do with routing).
How does network ...
1
vote
0answers
160 views
How do I get my other computer to connect to the internet?
I have a WAN VPN with dynamic IP. I have configured my D-Link DIR-300 router so my computer is now connected to the internet.
I want internet also on another computer in the room. Although I've ...
2
votes
1answer
4k views
Problem with persistent routes and VPN connection in Windows 7
My home PC has a VPN connection to my office. The office network is firewalled, with a secure zone on 192.168.0.* and a DMZ on 10.0.0.*
From outside, www.mycompany.com routes to a public IP - say ...
4
votes
1answer
3k views
How can I route *some* traffic over an SSH SOCKS proxy on OS X?
I have a SSH SOCKS connection running for VPN purposes, and this works beautifully. By using either FoxyProxy for Firefox, or a .pac file for OS X's Automatic Proxy Configuration option, web traffic ...
0
votes
1answer
182 views
Rerouting international traffic based on GeoIP
My home connection is slow internationally but fast locally. My private remote server is fast both locally and internationally, but it does not pay off to use it locally due to proxy/VPN overhead. Is ...
0
votes
1answer
3k views
Connect to my entire LAN through OpenVPN, QNAP
I'm trying to set up an OpenVPN server on my QNAP Nas.
My network:
Router: 192.168.0.254
QNAP Nas: 192.168.0.5
Some other computer in LAN: 192.168.0.7
Subnet 255.255.255.0
I've forward port 1194 ...
0
votes
1answer
941 views
How to redirect / route VPN traffic to back standing local network?
There are two computers one "HOME" with Ubuntu 10.10 installed, and another "WORK" with WinXP installed. WORK PC is behind draconian firewall. However, let's imagine, that there is VPN connection ...
