SATA (Serial Advanced Technology Attachment) is one of the most common bus interfaces for connecting mass storage devices to a computer system.

learn more… | top users | synonyms

1
vote
1answer
59 views

Hard Drive working incorrectly

I tried to install a second SATA laptop hard drive to my desktop PC, and everything works just fine, I was able to browse the files on it, until I try to format it. Then it started making a high ...
-1
votes
1answer
170 views

How do I optimize eSATA performance in Linux?

I experience very slow eSATA performance. Around 5 mb/s on a disk that easily handles 150-200 mb/s. Do I need to enable some setting or module in order to speed it up? The disk is a 4 TB disk and the ...
1
vote
0answers
29 views

Disk drive not recognized by laptop

I have an external USB drive. Took it apart and got the internal drive. Used it as normal on my desktop. Put it back together and tried to use it on a laptop. The laptop recognizes the drive but does ...
1
vote
1answer
71 views

Are there any problems if one tries to expand Internal hard drive beyond maximum capacity mentioned?

I have a Sony Vaio and my laptop currently holds a 500 GB SATA hard drive. Recently the drive got crashed and I am buying a new internal Hard Drive. Let's say max capacity of my Laptop to hold is 750 ...
1
vote
1answer
274 views

2 TB hard disk extremely slow/stuck if used through a USB docking station, works perfectly with SATA or e-SATA

I have a 2 TB hard disk which I'm sure works fine. I have bought a hard disk docking station which should support disks up to 4 TB. This dock can use either USB 3.0 or e-SATA. Using the HD with e-SATA ...
0
votes
3answers
130 views

Is is possible to get a virtual disc drive to mount over usb to another machine's motherboard?

Here's what I'm trying to do. I have dvd duplicators that only duplicate discs from a master disc. I can also install an internal hdd with images stored on them and duplicate from there. These ...
0
votes
0answers
109 views

Second HDD only works on a single SATA port

I bought a second hard drive to set up in my computer and could only get it working by unplugging the DVD drive and using that sata port (SATA 4) on the motherboard. If I plug it in in place of the ...
-1
votes
1answer
2k views

How to check my computer has SATA III or SATA II?

I brought a SSD last week that supports SATA III. I wish to connect it to my PC but I have no idea whether my PC has SATA II or SATA III. I can provide any details or screenshots if needed. ...
2
votes
1answer
942 views

Windows 7, Detecting hard drives; Done; No drives found?

I recently reinstalled windows 7 on a Gigabyte GA-X58A-UD3R (revision 2.0) motherboard with an SSD hard drive. I was reading about IDE vs AHCI and the consensus seemed to be that AHCI was better ...
0
votes
0answers
276 views

SATA hot swap (AHCI mode), unplug data or power cable first?

How to hotswap Sata HDDs? After I choose 'Safely remove hardware' -> 'Eject WDC xxxxx ATA Device' what should I do? I've read this: 1-For unplugging I should unplug the data cable first then the power ...
-2
votes
1answer
35 views

Is it possible to configure a Sata RAID Controller without RAID

I have a 6 port SATA RAID card (taken out of an HP ML150 G2 server). What i want to do is connect the Sata Hard Drives that i have to this card without formatting or loosing any data on the hard ...
1
vote
1answer
485 views

Dell Latitude E5430 with PR03X Dock not recoginizing ext HD through eSATA port

I have a Samsung HD103SIf TB drive that originally came in an ext usb caddy. I used it with an older Dell Laptop running Windows XP. It worked fine until one day it would not power on. I pulled the ...
0
votes
0answers
358 views

Laptop not booting if sata controller set to AHCI

I have Toshiba Satellite C660 Tried to install Windows7 by selecting Sata controller as AHCI I got this message Windows cannot be installed to this disk. This computers hardware may not support ...
8
votes
2answers
17k views

How do I know if my MacBook Pro supports SATA III?

I have a MacBook Pro that I bought around 2011. How do I know what level of SATA the internal hard drive interface supports? This is the About This Mac: And this is what the SATA section of the ...
0
votes
2answers
1k views

How to identify what type of SATA drive my laptop can take?

I have a 2011ish MacBook Pro. I want to upgrade its hard drive, but I am having trouble identifying: What would be compatible my laptop. For instance, this SSD is SATA III. How do I find out if my ...
0
votes
1answer
43 views

eSATA and SATA III

I currently have a SATA to eSATA adapter on a system with SATA II, but I'm going to be upgrading to a system with SATA III ports on the motherboard. What I'm wondering is, if I connect the same ...
0
votes
1answer
163 views

SATA external hdd is detected as a removable drive and asks “please insert a disk”

I have external SATA hdd of Samsung 200GB. When i try to connect it to my PC, it's being recognized as a removable Disk and when I click on it, a message of "Please insert a disk to the drive" pops. ...
0
votes
1answer
383 views

Installing ssd in 27 inch 2011 iMac

I want to replace my SSD with the HDD inside my iMac and then move the HDD to the optical drive. Is this possible? I have read that I can install my SSD where the optical drive is, but I'm wondering ...
0
votes
2answers
542 views

Is there a SATA cable which can connect to multiple disks?

I have a motherboard with just few SATA slots but have to put quite few hard disks in the box, so naturally I easily ran out of free slots. I wonder if there are forked cables (I have no idea what ...
1
vote
0answers
52 views

Device for easy hard disk imaging

I am looking for a device of which I don't know how it should be called. The current situation is that we provide computer services and often have to take disk images of hard disks before doing ...
1
vote
3answers
3k views

Does it make sense to install a SATA3 SSD in a notebook with SATA2?

I have a notebook with SATA2 interface. Most of the SSD drives have SATA3 and performance about 500 MBps (while SATA2 handles up to 300 MBps). Does it mean it makes little sense to install an SSD ...
1
vote
0answers
311 views

ECS Elitegroup KV2 lite 1.0 Motherboard doesn't detect SATA drive and takes forever to load BIOS

my problem is as follows: I was connecting a (bootable) SATA hard drive to the 'ECS Elitegroup KV 2 lite 1.0' in my friends rig, which already had two IDE hard drives (one with bootable Windows XP) ...
0
votes
1answer
55 views

SSD connected through usb3 / sata

Is there performance difference for ssd drive connected through usb3 or sata? Im need to use ssd as external drive (usb3) and like to know if there is some performance overhead using adapter... ...
1
vote
1answer
33 views

Remove Backup Drive, Windows 7 Fails to Boot?

I have 3 drives, 1 SSD (Letter E primary OS) and 2 backup SATA drives (C and D). In BIOS when I disable either or both of the SATA drives, the computer will fail to start. From what I have read, it ...
0
votes
1answer
186 views

HDD sometimes not recognised by BIOS during boot-up, not always

I have recently built a new machine with Intel G2030 4GB RAM and Asus H61-M-K mobo. I am using a 160 GB HDD (Seagate) from an old Core2 Duo machine. In the old machine, the BIOS sometimes would not ...
0
votes
0answers
647 views

Gray stop sign error when installing OS X Mavericks with Unibeast on a hackintosh

The Specs: cpu: i7 2600K (1155 LGA) mobo: Z68A-D3H-B3 ram: 6Gb Corsair Dominator (DDR2 or 3 I think, don't imagine that matters) disks: 2 SSD's, 1 HDD - SSDs have Windows 8 and Linux Mint ...
0
votes
0answers
40 views

ODD Drive detected as hard drive in USB to SATA

Obviously I have been using a USB2SATA cable to connect my unused iHAS drive to my computer. (No SATA ports left). The computer lists the device as a "bridge" instead of the real device as the seller ...
0
votes
1answer
303 views

Configuring RAID on Intel DX58SO CTRL+I does not enter RAID Config Utility

I have two 3TB HDD plugged into SATA 0 and SATA 1. I configured the drives for RAID in the BIOS and now when I boot I see the RAID config screen. The screen lists all my drives as it should and says ...
0
votes
3answers
9k views

HDD Regenerator won't fix bad sectors

I got pretty new Toshiba 500GB HDD as 2nd HDD(just for data) in my ThinkPad T400. Seller told me, that he just replaced this HDD with SSD in his new laptop. After about month of using I tested this ...
0
votes
0answers
291 views

How do you auto mount hot swappable sata drives based on what sata port it is attached to?

I'm looking to auto mount hot swappable sata hdd's. There are multiple drives so identifying them via their UUID's is out of the question. I've searched but can't find a suitable option. The ...
2
votes
2answers
358 views

Dangers of using external power source with internal hard drive

Is it okay to connect a internal hard drive (IDE/SATA/SCSI) to an internal controller (e.g. on-board the motherboard) and supply the power via another power supply or an external unit like the one ...
0
votes
0answers
46 views

EXfat perfomance on harddrive

In windows administration tools, I can choose to format a internal hard drive as exfat. Harddrive is WDC WD10JPVX 1 TB model Should I use EXfat on a SATA hard drive?
0
votes
0answers
817 views

Is my MacBook Pro 2012's Hard Drive SATA Cable broken?

I dropped my backpack from my bed few weeks ago and my MacBook was in it. At first it wouldn't boot up at all, but I managed to boot it up using internet recovery. I checked issues with the drive and ...
1
vote
1answer
408 views

SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching ...
-1
votes
4answers
9k views

what is the fastest way to copy all data to a new larger hard drive?

I was certain this would have been covered before, but I cannot find an answer amongst all the almost-duplicates that come up; sorry if I've missed something obvious. I have a full 320gb disk inside ...
0
votes
1answer
99 views

Software RAID 1 Configuration

I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to ...
0
votes
0answers
103 views

Does it matter where I put my second hard drive?

I have a Lenovo G580 (model 20150), and in addition to the built-in HDD (2.5", 1 TB, Serial ATA 2 (3Gb/s), 5400 rpm, 9.5mm) I want to add a SSD (2.5", 120GB, 256MB Cache, SATA III). It looks like ...
0
votes
1answer
670 views

SATA Switch Drive

So I recently acquired an SATA Switch Drive ... http://www.amazon.com/Drive-Switch-Controller-Orico-HD-PW6101/dp/B005NVV2GC Now the problem I'm wondering is that is not compatible with the SATA ...
0
votes
0answers
28 views

Is it worth having SATA 6GB/s cables? [duplicate]

I've just received some SATA 3 6GB/s cables that I ordered last week, and it struck me how ordinary they look when compared to normal standard SATA cables. My PCI-E SATA3 card is yet to arrive. My ...
1
vote
1answer
196 views

Clone a hard drive with ubuntu live?

My desktop hard drive is failing and I have to clone windows 8 and all my files asap! Was thinking that I could boot into ubuntu live and copy my failing drive to an external drive then swap it out ...
4
votes
3answers
727 views

Can SATA be used to connect computers?

Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the ...
1
vote
4answers
1k views

Hitachi HDD PCB ROM Replacement (firmware)

I've put a 24V adapter on a 12V HDD. Now the PCB is broken (HDD does not spin up anymore.). I'm very lucky and found a HDD with the exact same PCB. I've been searching on the internet and found that ...
1
vote
0answers
277 views

Do SSDs have to have AHCI to maximize performance?

After my last post concerning my motherboard's RAID, I'm considering purchasing an additional dedicated RAID controller, but I have a few concerns about what to buy, because I'm facing yet another ...
0
votes
0answers
422 views

No hard drive detected during Debian installation

I'm having problem in installing debian 7.5.0 on Supermicro server running on raid 1 whereby the hard drive is not detected. This server is running 2x 600GB hdd and i'm using DVD images of ...
2
votes
2answers
3k views

Is there any limit on how many SATA power connectors i can extend

I am running out of SATA power connector from my PS unit. I have ordered One SATA to 2 SATA extender connector from ebay I want to know that how many max i can join them in series. Can i make 4 ...
-1
votes
1answer
23 views

How can I join the big chasis with SATA drives to computer

I am planning to order this chasis with 20 SATA Drives It has only chasis and powersupply. How am I supposed to use this. As I have understood I need to add motherboard to the chasis and make it as ...
1
vote
2answers
285 views

How can I add 4TB SATA disk to motherboard without formatting ?

I had a 4TB seagate USB3.0 hard drive with data. I took the case out and got the internal SATA drive from that case. Then I joined it to my Intel D975XBX2 motherboard with SATA cables, but the ...
1
vote
2answers
246 views

How can i build home SAN with SATA drives only

In my home i have 5 user using different computers and we have one server with vmware Esxi on it to use for virtual machines The problem i am having is storage i have desktop where i have stored 7 ...
2
votes
1answer
60 views

How to access Windows 7 inactive Drive

One of my very important drives become inactive. I have to make it active in order to use it again. I use Windows 7 Disc Management Tools to assign drive letter and make it active. I can see the drive ...
7
votes
3answers
14k views

SATA Devices not showing up when in UEFI mode

I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD ...