The tag has no wiki summary.

learn more… | top users | synonyms

2
votes
1answer
297 views

My scanner isn't responding. It is connected to a SCSI interface using Windows XP

I have a Microtek ScanMaker 9600XL scanner. The best part about it is that it is 12x17 inches. Wowza! The worst part about it is that I've had it working at one point, with the same cable, same card, ...
2
votes
1answer
257 views

Software to aid using camera as a scanner

I want to digitize some index cards with my camera. I'm looking for a program that would automatically fix geometry on the shots (as you would expect the cards come tilted on the picture). I have an ...
1
vote
1answer
50 views

Arbitrary paper size while scanning with OKI MB441

Is it possible to scan arbitrary paper sizes with OKI MB441? For example photographic pictures? I see only poor predefined set of sizes:
1
vote
1answer
244 views

Scanning, OCR and adding the scanned numbers

I need to scan hundreds of pages with numbers written on them in the bottom right corner. Post scan - I need a OCR software to recognize the number written at the bottom right corner of each page and ...
1
vote
1answer
336 views

Nmap shows 554 and 7070 open on EVERY machine even when they are closed/filtered

Every single machine I scan shows port 7070 and port 554 as open regardless if the ports are closed/filtered. It will still show those two ports as open even if the target is offline (and the scan is ...
1
vote
1answer
296 views

Utility for scanning stacks of double-sided documents

I have a simplex scanner with document feeder, and am looking for the best way to scan double-sided notes. It would be useful to be able to scan the same stack twice, once flipped, and have a utility ...
1
vote
1answer
2k views

How do I convert ms/line to ppm

I'm looking at buying a scanner with a document feeder. The feeder can feed in 30 ppm, but the scanner can only can at 12 ms/line. So how fast is the scanner scanning? Is having such a fast ...
1
vote
1answer
822 views

Canon LiDE 600F FAU on Snow Leopard?

I have been able to use my Canon LiDE 600F scanner under Snow Leopard to scan paper sheet, after installing Canon's latest driver software. However, I cannot find a way to make the FAU (Film Adaptor ...
0
votes
1answer
35 views

Brother MFC 7360 scanner - Scans from ADF are legal size, even though paper isn't

I've got a Brother MFC 7360 setup with network scanning. I redid the network scanning a while back to run on Linux. In all cases, scanning works fine, however, when I scan using the ADF, all of the ...
0
votes
1answer
72 views

Scan from multifunction network printer

I have printer HP LaserJet 3055 that is on network. I can print to it without problems, but I can't scan - windows 8 doesn't see it like scanner. Previously it was connected using USB port to my PC ...
2
votes
0answers
13 views

Is there a way to provide access privileges to USB scanner via TWAIN SANE-backends for all users in Mac OS X 10.9 (Mavericks)?

I want to enable all users of a Mac OS X 10.9 (Mavericks) system to use a USB flatbed scanner. Such scanner works using TWAIN SANE from my account (admin) without sudo-ing, while other users can run ...
2
votes
0answers
287 views

How to set the same crop settings for all documents being scanned?

I'm scanning a lot of images using Windows Fax & Scan. I reduced the DPI to speed up the process. All photos are the same size, so I was wondering if I can crop them all at once. Right now, I ...
1
vote
0answers
27 views

What protocol do networked scanners use? Linux server emulation of same?

TLDR: What protocol do network scanners use, and how do I use that to set up a Linux scan server to OS X client? I have a Brother DCP-7065DN laser printer/scanner. It's great. It's connected to ...
1
vote
0answers
8 views

Can SANE daemon communicate with a remote network device that has a scanner attached?

My understanding is that SANE is a service that sits between the user level programs and the physical scanner itself, and that SANE provides an API to the programs that it then relays to the physical ...
1
vote
0answers
60 views

scanner shows up in xsane under a false device address

i have a problem communicating with my Brother DCP-8040 which can be used for scannig and printing as well. I cannot really tell what the problem really is but here is the output of commands that i ...
1
vote
0answers
28 views

Hp scanner application fails to save a file in Hebrew format

I have an HP laserjet M1522NF and i am using the scanner software that comes with the drivers. what is happening is when i scan a document and try to save the document in Hebrew i get a message: ...
1
vote
0answers
379 views

Add computers to HP CM1312 NFI MFP Scanner

Does anyone happen to know how to add computers to the "Select Computer" menu of HP CM1312 NFI MFP Scanner? I remember that there was a check box somewhere in the application but it didn't work ...
1
vote
0answers
37 views

Flatbed Document Scanner

I have a flatbed scanner hooked up to my older WinXP machine. When I hit the scan button it brings up the prompt asking to what program I want to run. Is there a registry edit, program that will allow ...
1
vote
0answers
136 views

Linux Reseting USB for scanner

My distro does not yet have a backend for my scanner, but the last release of SANE does. So I downloaded the source and installed. Scanning goes fairly well except that for some reason at the end of ...
1
vote
0answers
179 views

Scanning on the HP PSC 1401 without a cartridge installed

Is it possible to scan documents using the HP PSC 1401 combination printer/scanner if there is no printer cartridge installed? When I turn it on (without a cartridge) the "no cartridge" light blinks ...
1
vote
0answers
48 views

Removing scanner selection from Windows' scan window

I'm having an issue with scanner services showing up. I recently reinstalled Photoshop, but it seems that the old "scanner service" stayed. Assistance in removing this will be appreciated. ...
1
vote
0answers
350 views

How do I configure my Asus WL-520GU to support my F2238's flatbed scanner for MacOS X?

I have an Asus WL-520GU and an HP Deskjet F2238. I want to be able to wirelessly scan documents to client computers. I think this is possible but I'm not sure how to set this up. Any pointers?
0
votes
0answers
13 views

Where is Plugin menu of Nessus Home v. 6.3.6?

I just downloaded and installed "Nessus Home v. 6.3.6". But, I can't find the plug-ins of Nessus. Where is the plugin section? Under which menu?
0
votes
0answers
10 views

Nessus Home not logging in

I have deleted and reinstalled Nessus for the 7th time now and I still cannot log in. Ive checked everything from my firewall and SSl certificates. When I try to login it only shows a spinning wheel ...
0
votes
0answers
41 views

scanbd recognizing buttons but not triggering scan

Even though the Beta RaspPI board is awesome, I'm re-posting here since - being a beta board - the question is getting no significant views. I don't think the fact that's it's on RaspPi is ...
0
votes
0answers
25 views

scanbd not triggering scan

Debian Linux I've only just discovered both SANE and scanbd I’ve installed SANE with a Canoscan 210 and, by itself, it works. The scanner identifies as “genesys:libusb:001:005” “scanimage -x 210 ...
0
votes
0answers
33 views

110GB of hard drive eaten by scanner

I am in the process of scanning a couple of dozen reference books into pdf. The pre-optimized pfd's are around 150MB in size. For some reason since I've been doing it my c: drive has lost 110GB and is ...
0
votes
0answers
15 views

Problems with Canon Desk Scanner

I have been using a Canon DR 6030C desk scanner and have had a problem with the document scanned being shifted to the left, cutting off the left margin and leaving a black unscanned looking area on ...
0
votes
0answers
60 views

Compile brscan3 on Raspberry Pi (brother scanner)

I am trying to compile brscan3 (Brother software for scanner) from source file on my Raspberry Pi (arm architecture). I tried ./configure but I obtain this error: config.status: creating Makefile ...
0
votes
0answers
26 views

Running Windows XP, just installed free download of forticlient AV, wifi printer still ok to print but won't now scan

I'm a novice user using windows XP laptop with Epson multifunction printer. Recently downloaded Forticlient antivirus software and can still print wirelessly to the Epson printer but when I try to ...
0
votes
0answers
147 views

How to use Umax Astra 5600 in Windows 7 64 bit?

I have a Umax Astra 5600 Scanner. I lost my PC in an accident while moving. Now I have a HP Pavilion g4 with Windows 7 (64 bit). I tried using my scanner on it but the scanner is not even recognised ...
0
votes
0answers
56 views

Canon Maxify MB5020 scan above 600dpi

My Canon Maxify MB5020 specification indicates max optical scan as 1200 dpi or up to 19,200 interpolated: However, with drivers installed I cannot select above 600 dpi: 1200 x 1200 dpi ...
0
votes
0answers
22 views

How to find which chipset my scanner is using in Ubuntu/Linux?

My laptop is running Unbuntu 14.04. I have a Genius Vivid-1200TA scanner which is not supported by SANE and I want to find or develop a driver for it to be supported! How to find which chip-set is ...
0
votes
0answers
110 views

How to access Brother network scanners

I have two network/USB all-in-ones that are in separate networks, Brother MFC-7840W and Brother MFC-9840CDW. The operating system is Ubuntu 14.04 LTS. USB works for printing and scanning for both. ...
0
votes
0answers
253 views

Scan functionality not working

I have a Brother MFC-7860DW. It is set up wireless. I can print just fine but the scanner will not work. I keep getting the error message that says: MFC7860-DW LAN cannot be found . . . ...
0
votes
0answers
25 views

How to prevent CanoScan from shifting scans by 2mm?

According to documentation, my CanoScan 9000F Mark II cannot scan all the way to the edge. There is a 2mm border next to the bezel which cannot get scanned: If I place a piece of paper in the top ...
0
votes
0answers
33 views

I don't have a scanner. How can I clean up a photo of a piece of paper?

Recently I've been asked to print a piece of paper, sign it, scan it and then send it back via email. Unfortunately I don't own a scanner. I'm hoping I can take a photo of the paper and then ...
0
votes
0answers
87 views

How to reset pad counter on HP Scanjet Pro 3000

How do I reset the counter in the HP Scanjet Pro 3000 after replacing the pad assembly? The driver continues to give a warning that the pad needs to be replaced after 50,000 pages. There is no ...
0
votes
0answers
52 views

Using fingerprint scanner to authorize SSH access

I am looking for a way to implement the following scenario: Using a fingerprint scanner, while an authorized user swipes his finger on the scanner, it will allow him to remotely access an SSH service ...
0
votes
0answers
50 views

Prompt on scan in Win7 for Brother DCP-7065DN or Screenshot Captor

The Brother ControlCenter4 was installed in order to both automatically install the network printer, a Brother DCP-7065DN multi-function device, as well as the necessary software for being able to ...
0
votes
0answers
21 views

How to disable back movings of scan head in OKI MB441 scanner?

While scanning, scanning head makes often backwards moving, which is significantly slowing the process. Proof: http://www.youtube.com/watch?v=g0vpBSB2uFA I remember, by HP scanner, that this occurs ...
0
votes
0answers
42 views

Install HP Scanjet Software after previous install was deleted

I am using an HP Scanjet G2410 scanner and previously installed the software on my external hard disk. The external hard disk stopped working and the software got deleted. I used Revo Uninstaller to ...
0
votes
0answers
50 views

Changing Device Name (WIA Driver)

We currently have several network MFP's that are all the same make/model. They are using WIA drivers, however they show up as multiple of the same devices when attempting to scan (See below link for ...
0
votes
0answers
19 views

How do I disable Windows 8 scanner profiles from controlling my scanner?

I have an HP scanner that allows scanning options to be selected on the scanner. Windows 8 is taking control of that function and not allowing me to use my HP software to customize the scan menu on my ...
0
votes
0answers
166 views

Kodak Scanner Software Issue 0xc0000005

I am trying to be able to use a program called Kodak Smart Touch, but just today I have experienced an error preventing it from opening. The scanner is a business class scanner, an i2900. It comes ...
0
votes
0answers
105 views

image / document scanner source selection changing

I have an issue which might seem strange. In a computer two scanners are installed. A flatbed scanner and a document feeder. We use some web based procedures to do things in which document scanning is ...
0
votes
0answers
610 views

Can't scan with Samsung SCX-4216F

I Have Samsung SCX-4216F multifunctional printer connected via LPT port to Windows XP machine. I have installed printing and scanning drivers from Samsung and software called SmartThru 3. ...
0
votes
0answers
58 views

Partial page scanning

We have about 30,400 sheets of paper. Each sheet of paper has an ID that is written by hand as shown in picture: http://www.flickr.com/photos/46620806@N05/8677946233/in/photostream/lightbox/ I'm ...
0
votes
0answers
272 views

Blue horizontal lines when scanning with color

I have an HP Scanjet G2410 flatbed scanner that was working perfectly until now. When I try to scan something in color I get these large horizontal lines at the top and bottom of the picture. For ...
-1
votes
0answers
21 views

using scan on windows 8 remote connection

I have a printer HP deskjet 1510 and it works fine in my windows 7 laptop I can print and scan. but when I connect to windows 8 server I can only print but I can't scan, although that I already ...