0
votes
0answers
32 views

S.M.A.R.T. diagnostics recommends firmware upgrade

I have an Ubuntu server with a RAID-6 array. 3.13.0-27-generic #50-Ubuntu SMP Thu May 15 18:06:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux I was checking out the S.M.A.R.T. diagnostics for the ...
1
vote
1answer
41 views

How to determine which drive in a firmware RAID is failing

I have two drives in an Intel ICH10 RAID 1. They are not enterprise-level drives; just regular WD Caviar Black drives. Recently, reading/writing to the mirrored volume has become extremely slow and ...
5
votes
1answer
113 views

Is it safe to “use” to disk if extended smart check is in progress?

As simple as the title suggests. /dev/sda is a unit from /dev/md127 - RAID1 drive. I'm currently running a test - started a smartctl -t long /dev/sda. Afterwards, I started to copy files over ...
2
votes
2answers
108 views

Will my hdd fail?

I'm running badblocks in parallel on 2 identical hard drives. The problem is that /dev/sda has already finished without error the tests but /dev/sdb it at 363353920/488386583 (about 75%) but didn't ...
0
votes
0answers
800 views

Unreadable sectors reported by smartd, is it serious?

I have a RAID 5 array of 4 disks. In the last 2 days I began to see these messages in the log: Jun 13 23:01:05 localhost smartd[4537]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors ...
0
votes
1answer
814 views

WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB ...