1
vote
0answers
48 views

windows server 2012 span multiple raid 5 arrays

I have some old hard disks that I want to get as much out of them as possible for space. Currently, I have: 2 x 200 GB HDD 2 x 500 GB HDD 2 x 1.0 TB HDD 1 x 1.5 TB HDD If I combine them as ...
0
votes
0answers
40 views

Skip initial resync on a new Windows software RAID 5 build?

I just added 8x4TB and created a software RAID5 volume. Server 2008R2. Based on progress so far, it's going to take 8 days to complete the resync. I'm not a busy man, but that's asking a lot. ...
0
votes
1answer
77 views

Setting up a RAID 5 Array

I am currently trying to convert my drives from just a bunch of external disks, each one individually shared from my (CentOS) server into a RAID array (ideally, RAID 5). At current, my drives are: ...
0
votes
0answers
45 views

Is it possible to restore lost files from a repartitioned raid 5 array?

I decided to reinstall my server from Windows Server 2008 R2 to Ubuntu Server 13.10. Of course, i took a backup of the (531GB) files on my software raid 5 array (4x3TB, no hotswap), however, some ...
2
votes
1answer
167 views

Is Btrfs vulnerable to RAID write hole effect?

If not, does it mean that Btrfs in RAID mode is fully resistant to power failure?
1
vote
1answer
507 views

Assembling an mdadm array with “possibly out of date” disks

I've recently moved house and have had some power problems after switching on my file server that's using a mdadm RAID5 set up. The file system I'm using is ext4. It seems that at some point two (of ...
1
vote
1answer
285 views

Restart degraded RAID array after crash

I've had to (temporary) reduce my RAID5-Array, so that there are four out of five disks available. Things getting worse as my system crashed during write process. After reboot the system wants to ...
4
votes
3answers
13k views

How do I reactivate my MDADM RAID5 array?

I've just moved house which involved dismantling my server and re-connecting it. Since doing so, one of my MDADM RAID5 arrays is appearing as inactive: root@mserver:/tmp# cat /proc/mdstat ...
2
votes
1answer
2k views

Degraded RAID5 and no md superblock on one of remaining drive

This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was ...
8
votes
1answer
541 views

Find files affected by bad blocks with md-raid5 and LVM

I've been doing a lot of research on this topic over the last few weeks - and I think I'm close to completing my recovery, as much as is possible at least. To make a long story short, I'll just ...
1
vote
2answers
2k views

Debian installation and RAID5

I just bought a HP Microserver for use it as dns, http, vpn, file storage and also for backups of other computers at home. I already have 2 1Tb HDD's, so I thought to buy another 2 HDD's and install ...
0
votes
2answers
1k views

FreeNAS RAID5 Server - CPU Choice

What factors should you consider when choosing a CPU for a FreeNAS server? What are the implications and limitations based on CPU in this context? Currently I'm looking to build a FreeNAS server ...
2
votes
2answers
2k views

Testing software RAID5 by pulling a HDD live. Bad idea?

I'm running Ubuntu Server 10.10, with software RAID5 and LVM running on top of that. I have four 2TB HDDs. I also have a separate boot drive with incremental full-system snapshots that run every four ...
1
vote
1answer
3k views

How do I tell mdadm to start using a missing disk in my RAID5 array again?

I have a 3-disk RAID array running in my Ubuntu server. This has been running flawlessly for over a year but I was recently forced to strip, move and rebuild the machine. When I had it all back ...
1
vote
0answers
971 views

mdadm raid5 read error not correctable

I have a software raid5 setup existing of 4 disks. sda, sdb, sdc, sdd Since everything was up and running I wanted to test the array. To do this I pulled the plug on one of the disks (sdd). Everything ...
4
votes
3answers
515 views

Several questions about software and onboard RAID 5

I have a few questions on how software and onboard RAID 5 compare: Is there any way to add a disk to an existing RAID 5 array using either software or onboard RAID? All motherboards I'm interested ...
3
votes
3answers
3k views

Bad performance with Linux software RAID5 and LUKS encryption

I have set up a Linux software RAID5 on three hard drives and want to encrypt it with cryptsetup/LUKS. My tests showed that the encryption leads to a massive performance decrease that I cannot ...
0
votes
1answer
393 views

Possible to load old software raid array on new system? Ubuntu

I am looking into a more redundant solution to my home server. I know raid is "not" a backup, but I am looking into a raid 5 solution for these reasons. I would be very annoyed if I lost my data, ...
1
vote
1answer
823 views

Recover Linux software RAID5 array after server upgrade

I recently upgraded a server from Fedora 6 to Fedora 14. In addition to the main hard drive where the OS is installed, I have 3 1TB hard drives configured for RAID5 (via software). After the upgrade, ...
4
votes
3answers
3k views

Hardware RAID - what happens if the motherboard or controller fails?

I want to set up a RAID 5 array in a machine that has an intel motherboard. It has built in raid (sata). My concern is what happens if the motherboard fails? How can I take those hard drives ...
2
votes
2answers
296 views

Recover from failed recovery of software RAID5 failure

I have the pleasure ;-) to have been handed the task to try to get data off a server that had a RAID5 array problem and a failed attempt to recover it. Background: the computer in question is some ...
1
vote
1answer
1k views

Should I include my OS partition on my RAID or separate hard drive?

I plan to build a Linux (Ubuntu 10.04) home file server soon with 3-5 x 2TB hard drives in RAID 5 software raid but I'm not experienced with setting up RAIDs. Should I include the actual Linux host ...
2
votes
1answer
550 views

Software RAID 5 with Multiple Partitions (one encrypted partition)

Can I have multiple partitions using Software RAID 5 on an Ubuntu Server? For example, say using a 4 drive RAID 5 setup, I want one massive partition for storage and a second smaller but encrypted ...
2
votes
1answer
440 views

How to plan a RAID 5 for expandability?

I'm planning on building a home file server with a few 2 TB drives and I wanted to use software RAID 5 under Linux (most likely ubuntu). Before I start, I wanted to know how easy is it to expand a ...
3
votes
1answer
954 views

ubuntu 10.04 softRAID 5 partition scheme

I'm trying to create a RAID 5 array which will contain the Ubuntu installation itself. I tried this partition scheme: 2.0 TB for / 6.0 GB for swap This was as per the instructions provided by ...
0
votes
2answers
3k views

Thinking of a RAID-5 Setup - What is the optimal configuration?

I am planning on setting up a RAID 5 array on my data storage drives using Windows Server 2008 software RAID. I currently have a 500 GB drive for the server OS and two 1 TB drives for data storage. ...
4
votes
1answer
710 views

What will happen with my RAID5 after motherboard change?

Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID ...
1
vote
2answers
728 views

Setting up an 8 drive raid for home use - hardware configuration?

I wish to build an 8x1.5tb file server for home use. I was looking at putting these 8 HDDs into RAID 5 or 6. However most botherboards only come with 6 sata ports so I will obviously need to get an ...
0
votes
5answers
1k views

Windows Software RAID 5 Drive Failure Notification

I plan on creating a Windows software RAID 5 array but need to know when a drive goes bum. I don't plan on wanting to check the server every so often, so how can I have an email sent when a drive ...
1
vote
2answers
3k views

Why does ICH10R raid 5 not show up on Ubuntu?

Using Asus P5Q Pro raid5, (ICH10R chipset). I've setup 4 SATA drives in Raid 5 using the motherboard's interface. It shows up in windows fine, without adding software. I've been using them fine for a ...