Questions which refer to software RAID implementations.

learn more… | top users | synonyms

3
votes
0answers
138 views

mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. ...
2
votes
0answers
579 views

mdadm RAID monitoring no DegradedArray email

So, I have a couple of MDADM RAID arrays and I want to set up monitoring with email notifications for drive failures through sSMTP but I can't seem to get it working. The system in question is a ...
1
vote
0answers
36 views

Growing an encrypted RAID5 array without causing alignment issues

Question Is there anyway to tell mdadm to make sure a certain logical sector on the RAID-device stays aligned to the beginning of a stripe when growing a RAID5 array? Problem My RAID5 is encrypted ...
1
vote
0answers
107 views

Linux MD software raid stripe cache size

From what I can piece together the /sys/block/md0/md/stripe_cache_size is for raid5 and 6 set at a very low default value to avoid starving machines for memory. By increasing this value you can get a ...
1
vote
0answers
73 views

windows server 2012 span multiple raid 5 arrays

I have some old hard disks that I want to get as much out of them as possible for space. Currently, I have: 2 x 200 GB HDD 2 x 500 GB HDD 2 x 1.0 TB HDD 1 x 1.5 TB HDD If I combine them as ...
1
vote
0answers
142 views

Raid 5 Degraded

I have a dell PowerEdge T110 with a raid 5 array that says it is degraded. This uses a perc s100 controller. I am using 4 74gb raptor drives for the array. The computer tries to boot but it hangs on ...
1
vote
0answers
218 views

Redundancy: LVM+mdadm or LVM internal RAID

The task is to create LVM storage for virtual machine images. So LVM will be used in any case. There are two ways LVM providing redundancy: block mirroring lvcreate -m 1 --mirrorlog mirrored -n ...
1
vote
0answers
28 views

Windows Software RAID recovery after non-RAID drive failure

This is a hypothetical question but first some context. I'm looking at setting up a simple RAID 1 (mirrored) for storing data. I was looking at using Windows Disk Management tools on a Windows 7 ...
1
vote
0answers
128 views

MDADM RAID 5 disk missing after reboot

I have a server with 6 disks (4x2TB + 2x4TB). I put the 2TB disks in 2 RAID 0 and the resulting 2 4TB RAIDs with the 2 4TB disks in a RAID 5 array. The RAID works fine until I reboot the server. After ...
1
vote
0answers
31 views

Is there a safe way to move a partition beneath a linux software RAID5 using mdadm?

Suppose, for example, that you have a RAID5 across multiple disks and you would like to retire the oldest of the disks and replace it with something from this decade. I know I can fail the partition ...
1
vote
0answers
2k views

SDcard /dev/sdb2 is apparently in use by the system; will not make a filesystem here

I divided my sdcard into 2 partitions, but It got an error and couldn't create a new partition. Error: /dev/sdb2 is apparently in use by the system; will not make a filesystem here! My ...
1
vote
0answers
455 views

md0 RAID1 can't read superblock

i have a problem with my md0 array, which is an raid1 (2 mirrored USB-Sticks) Mount gives "Can't read superblock" cat /proc/mdstat: Personalities : unused devices: <none> fdisk -l ...
1
vote
0answers
44 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
1
vote
0answers
133 views

Is `dmsetup remove` safe with respect to contained data?

I have a "lost" SW RAID array as described in this question: http://askubuntu.com/questions/311024/raid1-array-lost-after-upgrade-from-ubuntu-11-10-to-13-04. I have now identified a way to mount one ...
1
vote
0answers
223 views

Upon reboot, Linux software raid fails to include one device of a RAID1 array

One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). ...
1
vote
0answers
113 views

Difference in Storages Spaces feature between Windows 2012 Server & Windows 8

So here it goes, I have a test bed setup, a machine with three harddrives besides the OS drive and installed on this machine is Windows 2012 Server Standard. I have the following Storage Spaces ...
1
vote
0answers
59 views

Software RAID failed to mount after apt-get upgrade

I have a software RAID 10 (jfs) on an ubuntu 12.10 and require some assistance repairing the RAID after it failed to mount after a routine apt-get upgrade followed by a reboot. /dev/md0: Version : ...
1
vote
0answers
614 views

Unable to reassemble md raid on drives pulled from ReadyNas Duo v1

I'm toying with a ReadyNAS device that I've recently acquired. It is a SPARC-based box, and it runs linux. As device is pretty slow, I've pulled one drive out of array, hoping to populate it with ...
1
vote
0answers
320 views

Windows 7 : soft RAID1 and dynamic volumes reliability

My setup is quite classic nowadays : 1 SSD for system/apps and 2 HDDs for data setup in a fake RAID1 array. I also have a backup scheduled every week for the data drive in case it fails because I ...
1
vote
0answers
2k views

Linux - Repairing bad blocks on a RAID1 array with GPT

The tl;dr: how would I go about fixing a bad block on 1 disk in a RAID1 array? But please read this whole thing for what I've tried already and possible errors in my methods. I've tried to be as ...
1
vote
0answers
1k views

mdadm raid5 read error not correctable

I have a software raid5 setup existing of 4 disks. sda, sdb, sdc, sdd Since everything was up and running I wanted to test the array. To do this I pulled the plug on one of the disks (sdd). Everything ...
1
vote
0answers
494 views

proper procedure to repair RAID 1 volume in Windows Server 2008 R2

I'ave a windows server r2 with the following configuration 500mb SATA for OS 2 x 1TB SATA in Software Raid 1 (done through the operating system) One of the 1TB drives are bad. What will happen ...
0
votes
0answers
14 views

raid5 after changing disk, data disappeared in lost+found or?

I lost a drive so I stopped my array, changed the drive, reassembled the array. So far so good except that when I tried to mount the array I had an error about md0 file system (sorry I rebooted so ...
0
votes
0answers
20 views

Windows not loading after 1 RAID-5 disk failed

I left my PC turned off for just over a week while I was away. When I turned it back on it said my RAID-5 status was degraded and Windows did not want to load. I replaced the faulty disk and set it ...
0
votes
0answers
9 views

Updated CentOS kernel to 2.6.32, system won't boot because mdadm array can't be checked/isn't mounted

Just updated a FreePBX system, kernel is now at 2.6.32. Have two RAID 0 arrays that mdadm arranges in RAID 1. Worked fine up until this update, now I get fsck.ext4: No such file or directory while ...
0
votes
0answers
10 views

With a the built-in Windows software-RAID1 mirror, what procedure does Windows follow on an unreadable sector?

For modern retail hard drives, the Unrecoverable Read Error (URE) is around 1x10E14 bits. This translates into one bad sector for every 12 terabytes of data read. For enterprise class hard drives, its ...
0
votes
0answers
36 views

Raid Configuration lost After For Installing Windows/Formatting Hard Drive on reboot

My boss recently got a tower fujitsu server, I dont know the model because it is written in Chinese. I installed windows server 2012, activated hyper-v and even installed ubuntu as a VM and ...
0
votes
0answers
41 views

BTRFS multiple devices mix raid1 and raid0

Hi Consider the following use case: I have two disks same size (let's say 3TB each). Then create a btrfs filesystem using both devices. Now I want to have two subvolumes "idata" and "ndata". Where ...
0
votes
0answers
19 views

Moving software RAID to Linux

I'm using a RAID 1 (mirrored pair) configuration in my Media Center/ NAS system. Currently it's running Windows 8 (yeah, big mistake I know) and I'm regretting it (did it for the games, not worth it). ...
0
votes
0answers
139 views

Ubuntu 14.04 RAID10

I got Ubuntu 14.04 (recently upgraded from version 12.04). Under this system I got a software RAID10 build with 4 drives (WDC WD20EFRX-68EUZNO) near=2 layout. After the upgrade to newest Ubuntu LTS ...
0
votes
0answers
65 views

Virtual Disk Service Error: The plex type is invalid

I have windows 7 ultimate x86 on an older Dell Precision 530. I had 3 80gb drives laying around. So I have them in diskpart in windows 7 setup via Shift+F10 and I see 3 74gb drives. I cleaned all of ...
0
votes
0answers
30 views

mdadm on Debian 7 forgetting about a disk

I have a degraded RAID1 array running on Debian 7. I am trying to add another disk to the degraded array, but mdadm forgets the existence of the other disk at reboot. The array devices are /dev/sda1 ...
0
votes
0answers
19 views

debian boot procedure stops while starting RAID5 array

imagine the following situation: debian wheezy 7.4 on arm system created a RAID5 with 3 disks /dev/md0 created ext4 file system wrote entry to mdadm.conf via "mdadm --detail --scan >> ...
0
votes
0answers
104 views

Linux RAID Re-Shape Stopped, unmountable

I added another drive to my RAID 5 and migrated it to a RAID 6. Everything went fine, but now the process seems to be stuck at 63.2% and md2_raid6 takes 99.9 of the CPU. RAID Details: /dev/md/2: ...
0
votes
0answers
36 views

Build one logical drive from hdd and ssd drives (with a tweak!)

How is it possible to build one logical drive in linux from two physical drives, hdd + sdd with the below rules: All writes are replicated to both drives (Kind of RAID 1). All reads are only ...
0
votes
0answers
91 views

mdadm raid 6 stuck on rebuilding

I have a raid 6 running consisting of 9 1TB drives. Some time in the last couple of days, one of them became faulty and the raid startet rebuilding. But apparently it is stuck ... This is the raid: ...
0
votes
0answers
75 views

How to set boot disk after disabling mdadm raid 1?

I had two disks in raid 1. The device contained the whole system. Disabled it from a rescue disk with: (there were three partitions) mdadm --stop /dev/md1 mdadm --stop /dev/md2 mdadm --stop /dev/md3 ...
0
votes
0answers
128 views

Why is windows server 2008 resyncing new raid 5 array?

I have setup a software raid 5 in windows server 2008 standard, immediatly after creating it now says resyncing. What is it resyncing when there is no data on the volume? Is it safe to write data to ...
0
votes
0answers
60 views

Skip initial resync on a new Windows software RAID 5 build?

I just added 8x4TB and created a software RAID5 volume. Server 2008R2. Based on progress so far, it's going to take 8 days to complete the resync. I'm not a busy man, but that's asking a lot. ...
0
votes
0answers
17 views

Ubuntu boot through failed RAID

I have a large media partition as a separate RAID5 on my Ubuntu server. The server is not easily accessible, so I need it to continue the boot process in all but the most dire circumstances. Right ...
0
votes
0answers
176 views

Hybrid Raid-1 HDD + SSD — Write Intent Bitmap

I am currently running a laptop with 1 HDD and 1SSD. I currently am using mdadm to put some partitions in a raid 1 configuration with --perfer-write set on the HDD. I have this working correctly ...
0
votes
0answers
46 views

Is it possible to restore lost files from a repartitioned raid 5 array?

I decided to reinstall my server from Windows Server 2008 R2 to Ubuntu Server 13.10. Of course, i took a backup of the (531GB) files on my software raid 5 array (4x3TB, no hotswap), however, some ...
0
votes
0answers
47 views

Can OpenFiler do software RAID and then expose that as an iSCSI target?

I want to build a SAN for personal use for the house server. I came across OpenFiler. I don't want to rely on hardware RAID since the cards can be costly and if the card dies I will have trouble ...
0
votes
0answers
166 views

Use of mdraid in XenServer 6.2 limited by dom0?

I've been playing with XenServer 6.2 in a lab environment and have set up a glorified desktop with a few 7.2K disks in it. Not worried about official support, it's just for fun. I have enabled ...
0
votes
0answers
74 views

linux mdadm: recover overridden array

I had 2 3TB disks in a RAID1 array as /dev/md2. I tried to recover that array, by recreating it (which was probably stupid). I issued mdadm --create /dev/md2 --assume-clean --raid-devices=2 ...
0
votes
0answers
260 views

Power loss during mdadm RAID level change

As per the title, my mdadm RAID was in the process of migrating from level 6 to 5 when the power cut out momentarily. Unfortunately I am no longer able to reassemble the array - the assemble command ...
0
votes
0answers
49 views

Do a Re-Build During a Re-Shape?

On my Linux software RAID 6 array, I'm currently mid-reshape and 2 drives have been marked as failed. I've swapped them out and added new ones to the array, which are currently marked as spares. The ...
0
votes
0answers
507 views

Is there any way to stop or pause Windows software raid re-synching?

I have two physical disks, each one holds two volumes, they are Windows software RAID1. E.g.: Disk A: Partition1 Partition2 Disk B: Partition1-Mirror Partition2-Mirror After an unclean ...
0
votes
0answers
424 views

Is there any freeware software to ghost a RAID 1 disk?

Where I can find freeware software to ghost a RAID 1 disk? I installed Windows XP on a Dell server with a supported RAID card. I tried to ghost it using FOG project, but I think it doesn't support ...
0
votes
0answers
55 views

Windows 7 Raid - Drives can't see each other

I'm trying to stripe two drives using the disk management tool. Both partitions give me the option to stripe them but when I use the wizard the other drive doesn't show up to allow me to raid to it! ...