i have two different ISPs with NAT routers connected to the same subnet 192.168.2.0 that has a Centos6 server with 1 nic at 192.168.2.200. the gateways are GW1 192.168.2.1(default) and GW2 ...
On my server i have two interfaces; one is eth0, other is bond0. Unfortunately eth0 is only 100 mbits, opposed to bond0 which is 1000 mbits. eth0 is 10.0.0.21 gw 10.0.0.1 bond0 is 10.0.0.22 gw ...
I am using a DHCPv6 server (Dnsmasq) to assign IPv6 address in my LAN. My configuration works, but I am unable to ping the DHCPv6 server. The route information on host machine does not contain a route ...
Let's say I have two public network addresses on my server: one NAT through an ISP (192.168.99.0/24), and a VPN through a different ISP (192.168.1.0/24), already configured with a per-host route to ...
With IP options we can specify the route we want an IP packet to take while connecting to a server. If we know that a particular server provides some extra functionality based on the IP address can we ...
Our organization has several external IP addresses. I am behind 2 layers of NAT and the servers choose which IP address to route my traffic to. Can I specify which IP address to use when finally ...