0
votes
1answer
22 views

Installing ssd in 27 inch 2011 iMac

I want to replace my SSD with the HDD inside my iMac and then move the HDD to the optical drive. Is this possible? I have read that I can install my SSD where the optical drive is, but I'm wondering ...
0
votes
3answers
63 views

Does it make sense to install a SATA3 SSD in a notebook with SATA2?

I have a notebook with SATA2 interface. Most of the SSD drives have SATA3 and performance about 500 MBps (while SATA2 handles up to 300 MBps). Does it mean it makes little sense to install an SSD ...
0
votes
1answer
16 views

SSD connected through usb3 / sata

Is there performance difference for ssd drive connected through usb3 or sata? Im need to use ssd as external drive (usb3) and like to know if there is some performance overhead using adapter... ...
0
votes
1answer
11 views

Remove Backup Drive, Windows 7 Fails to Boot?

I have 3 drives, 1 SSD (Letter E primary OS) and 2 backup SATA drives (C and D). In BIOS when I disable either or both of the SATA drives, the computer will fail to start. From what I have read, it ...
-2
votes
0answers
19 views

How to define a height of optical drive of my laptop?

I have a eMachines E732G-382G32Mnkk. I want to install SSD instead of DVD-RW (MATSHITA DVD-RAM UJ8A0AS). I need a optical bay drive, but there are two heights for optical bay drives – 9.5mm and 12mm. ...
-2
votes
0answers
18 views

Low benchmark score for SSD because of SATA revision?

I was looking at some benchmark scores for the Intel 320 Series Solid State Drive. Here's the sequential read/write speeds I looked at: Sustained Sequential Read: Up to 270MBps Sustained Sequential ...
1
vote
1answer
58 views

SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching ...
0
votes
0answers
42 views

Does it matter where I put my second hard drive?

I have a Lenovo G580 (model 20150), and in addition to the built-in HDD (2.5", 1 TB, Serial ATA 2 (3Gb/s), 5400 rpm, 9.5mm) I want to add a SSD (2.5", 120GB, 256MB Cache, SATA III). It looks like ...
0
votes
0answers
27 views

Is it worth having SATA 6GB/s cables? [duplicate]

I've just received some SATA 3 6GB/s cables that I ordered last week, and it struck me how ordinary they look when compared to normal standard SATA cables. My PCI-E SATA3 card is yet to arrive. My ...
1
vote
0answers
37 views

Do SSDs have to have AHCI to maximize performance?

After my last post concerning my motherboard's RAID, I'm considering purchasing an additional dedicated RAID controller, but I have a few concerns about what to buy, because I'm facing yet another ...
-1
votes
1answer
56 views

How to find motherboard specs

I would like to upgrade my Sony Vaio VPC-EJ3S1R by replacing the DVD drive with an SSD. Only problem is, I can't find any information on its SATA interface speed so I cannot choose an SSD model. Where ...
1
vote
1answer
36 views

Swap internal HDD with SSD

I'm planning to swap my internal HDD with an SSD. My PC says my HDD is SATAII, is it possible to just plug in a SATAIII SSD and use the HDD as an external drive with a SATA/USB cable? Thanks for the ...
0
votes
1answer
49 views

building a computer: GA-Z87X-UD3H does not recognize 2hdds 1 ssd and 1 dvd drive

I have never built a computer before and followed these instructions for the 1200 rig: http://lifehacker.com/5840963/the-best-pcs-you-can-build-for-600-and-1200 When I booted it up, I got the ...
0
votes
1answer
40 views

Upgrading Laptop HDD to SDD

I have this Acer Aspire V5-471G Laptop with 466GB Seagate HDD using SATA 2.0(3.0Gb/s) interface. Now, I am planning to upgrade my HDD with a faster Samsung 840 EVO SSD which use SATA 3.0(6.0Gb/s) but ...
1
vote
0answers
220 views

Bad SATA cable suddenly? (MacBook Pro mid 2012)

OS X 10.9.2 Story SSD crashed due to kernel panic (Crucial M4). Data was still on it when I plugged it in via USB. Wiped and tried to reinstall via Time Machine, extremely slow transfer rate (est. ...
0
votes
1answer
37 views

Will SanDisk 64GB SATA Internal 2.5" SSD work with SATA II

Just a quick question, I have this motherboard asrock m3a785gmh and I'm planning to purchase a SanDISK SSD. Just want to make sure these two are compatible? I can not see a reason why they would not ...
0
votes
2answers
74 views

Two SATA 2TB drives in RAID-1 configuration; only one 6.0gb/s port open

Here's the scenario: I am building a computer that will act as a network storage device for local networked users, and a source code repository and backup device for remote users. The machine will ...
0
votes
0answers
38 views

Does the laptop power supply the SATA drive from battery even being powered off?

I have a Fujitsu Lifebook s762 with a native SSD drive. After a couple of months or so - the SSD became the "brick". I read the article and remembered, that just before the failure, I shut down the ...
0
votes
0answers
25 views

Got a BIOS message telling of SATA port 5 failure. How to tell which drive that was in Windows 7?

Got a BIOS message telling of SATA port 5 failure (some time after plugging a new healthy SSD into a 4-5 year old PC). How to tell which drive that was in Windows 7? The largest Channel number in ...
2
votes
1answer
121 views

Alienware M17xR3 only 3gb/s speed with SSD

I have an alienware M17xR3 and a Samsung 830 SSD, I've had it for a while now but today I've installed Samsung Magician, and I've noticed the message that my maximum speed is 3gb/s and 6gb/s is not ...
1
vote
1answer
108 views

Only latest used SATA port recognized in bios

I'm having a problem with my bios reading my harddrives. I have two harddrives with two separate Operating Systems on it. I'm trying to be able to choose which harddrive to load through the bios. When ...
1
vote
1answer
83 views

What is the total SATA bandwidth of the Intel Z68 chipset?

Take a look at this page for the Intel Z68 chipset: http://www.intel.com/content/www/us/en/chipsets/mainstream-chipsets/z68-express-chipset.html In the diagram, the line connecting the chipset to the ...
1
vote
1answer
169 views

Upgrading my laptop with a SSD, ODD bay vs built in

today I got my icy box hdd to odd upgrade kit and just before I actually put it in, I was wondering whether there is a reason to prefer one slot over the other. Basically I now have the option to ...
-1
votes
1answer
117 views

how do I know if SSD disk can be used with my motherboard [duplicate]

I'm trying to find how to check if particular SSD disc can be used on my motherboard: Motherboard: Gigabyte EX58-UD3R SSD: Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Single Unit ...
0
votes
2answers
36 views

Access SSD from two Systems with Maximal Speed

I'm looking for a way to access an High-Speed Drive (SATA SSD, 500 Mbyte/s Read-Speed) from two computers with the maximal possible speed. Parallel accessing from both computers is not necessary. Both ...
0
votes
1answer
146 views

Finding out SSD compatibility with motherboard

I have an issue with adding a new SSD drive to my MSI GT683. I have recently received a SanDisk Ultra Plus SDSSDHP 256 GB (2.5" SATA 6 GB/s, which I assume is SATA III) and I want to replace my old ...
7
votes
3answers
328 views

SSD Perfomance - Internal vs External?

I got a SSD for Christmas and it came with the option to have it installed internally or externally. I'm wondering if I have it setup as an external hard drive, will there be any major performance ...
3
votes
1answer
117 views

SSD & HDD - which should get 6Gb/s port

I have a PC with a single 6Gb/s SATA port, I have a 7200RPM HDD that is my primary drive (i.e. the OS is installed on it), I also have an SSD (450MB/s Sequential R/W, 85K Random Read, 55k Random ...
0
votes
1answer
92 views

How to know (without unscrewing the casing) if my laptop is capable of supporting Solid State Drives (SSDs)?

I have a lenovo V470 and as an Xmas treat I am thinking about upgrading to Solid State Drive (SSD) to utilise the benifit. However, I don't know if my laptop's motherboard is capable of supporting ...
1
vote
2answers
65 views

SSD and HDD transfer-rates impossibly high

Sometimes when I transfer a file from my SSD (Samsung 840 pro) to the same SSD, the transfer-rate is 800+ MBps, which should impossible from a SATA6 drive. Also, my HDD performs at 300+ MBps, again ...
1
vote
1answer
211 views

Is my disk drive (SSD) failing?

Just wanted to confirm my suspicions that I have a failing drive on my hands. So far here's what I've experienced: I initially got a BSOD while doing normal web browsing After rebooting; said there ...
0
votes
1answer
347 views

Can I Replace SATA 3.0Gb/s hard disk with With SATA 6.0Gb/s in Toshiba Satellite c660 laptop?

I have a Toshiba Satellite laptop and by default there is SATA 3.0 fitted in it. Few days ago, it stopped working. So I need to replace it with a new one. The problem I'm currently facing is I don't ...
0
votes
2answers
281 views

Use Sata III port with SSD or HDD drive? [closed]

I'm going to buy a new Desktop PC, and I'm thinking about buying a 32GB SSD SATA III and a 1TB HDD SATA III hard drive. The problem is that the motherboard only have one Sata III port, and the rest ...
1
vote
0answers
105 views

How to determine cause for failing RAID arrays

I have to investigate a recent increase in failing RAID-1 (Mirror) arrays we're encountering in our installed PC park (10K+ PC's). The problem is twofold: one part of being a pilot phase we started ...
0
votes
0answers
151 views

Motherboard Dying? AHCI Drive Init and boot loop intermittent failure

My computer is now intermittently failing to boot up. For the last couple of days, when I turn it on it hangs on "AHCI Drive Init...", and when powered off and on again, it booted up fine. Today, it ...
0
votes
1answer
136 views

Are special drivers required for Gigabyte SATA port on GA-P34-DS4 v2?

After upgrading to a Samsung 840 SSD drive, I have problems with image backups failing verification when the SSD is plugged into any of the ICH9 SATA ports in AHCI mode. The motherboard also has two ...
0
votes
1answer
62 views

What data transfer rate can I get with an SSD and SATA system? [closed]

I am looking for a solution that can write around 120MB/sec continuously to an SSD drive. Can I get this data transfer rate? The drive can be formatted in FAT32 or EXT2, and I write to it for say 1 ...
1
vote
1answer
194 views

SSD install - what do I need to watch out for when reconfiguring SATA ports?

I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper ...
0
votes
1answer
252 views

Windows start up failing to pass ahci driver init

I have build a custom pc and used for a few months now without problems. One day however, i got home and the he was shut down because of some error. Started windows normally and I got two error ...
0
votes
1answer
452 views

SSD Update for Asus Zenbook UX32A

I'm looking for a new SSD replacement (to a stock Hitachi HDD) for my Asus UX32A (Core i5 modification, with 24 GB SSD, 500 GB hdd, 4 GB ram). My choice fell on Samsung 840 EVO, but then I've scanned ...
-2
votes
1answer
379 views

How do I stop an INTERRUPT_EXCEPTION_NOT_HANDLED on my mv91xx.sys driver?

I have an EVGA motherboard with a Marvell MV99SE91 SATA 6 driver. When I go to their driver downloads page, navigate to Intel X58/ICH10R / 141-GT-E770 - EVGA X58 Classified3 / All / Windows 7 64-bit, ...
0
votes
1answer
192 views

How do i install Windows on SSD?

I've purchased this SSD: CRUCIAL M4 CT256M4SSD2, 256GB, SATA III. And i have a following MB: ASUS P8P67 EVO REV 3.0 MB and SSD are updated to the latest version of BIOS and firmware. When i start ...
0
votes
2answers
688 views

My motherboard doesn't support AHCI, is IDE mode + SATA 2 much slower for new SDD/HDD/SSHD?

My motherboard is Intel DG41TY and it does not support AHCI. How much would IDE mode + SATA 2 be slower comparing to ideal case AHCI+SATA 3? If it is much slower for SDD case, then would it be a good ...
2
votes
1answer
1k views

Any harm in swapping SATA ports?

I have 3 disks in my desktop PC (Z77 Intel Ivy Bridge chipset with 2x SATA 6gb/s, 2x 3gb/s ports). Current disk / drive letter mapping: Drive C: | SSD Intel 530 Series | Main Windows 8 drive Drive ...
2
votes
1answer
468 views

Why SAS SSDs are better than SATA SSDs? Or…not really? [closed]

I read a lot about the differences between Serial ATA, Serial-Attached SCSI and Near-Line SAS. I understood that SATA drives are mainly used in client computers, enterprise archive storage arrays, ...
1
vote
0answers
360 views

Trim on SSD on windows 7 with ide mode

I have an ssd on ide mode in windows 7. (its a clone of the hdd and that was in ide mode). I just turned on ahci mode (after using it 2 months in ide mode) and it works faster. I was wondering if ...
3
votes
2answers
141 views

Gradual loss of RAM, CPU fan, HDDs. Possible suspect motherboard?

I've been having quite some unsettling issues with my desktop recently In the last 6 months up until now I've had an alarmingly growing rate of malfunctions. In chronological order: RAM started ...
0
votes
0answers
53 views

Windows Installation Process Not Detecting SSD

I've recently bought a OCZ Onyx Series SATA II 2.5" Solid State Drive. I also bought a Kingston 7GB pendrive and made it into a bootable Windows device. When I look int the BIOS it shows that I've got ...
1
vote
0answers
89 views

SATA-II SSD Raid 0 slow on Windows-7

I have 2 SSDs and made a RAID 0 with the on-board controller of my mainboard. But i only get 130 megabyte/second average read/write speed which seems to be pretty slow for me even for SATA 2 which ...
1
vote
1answer
538 views

Why is Marvell SATA 3 storage interface not recommended for SSD?

I am planning to add an SATA 3 SSD drive to my computer which has a Gigabyte UD7 motherboard (link)(Socket 1366, Intel X58 chipset). The SSD drive will be used purely as an OS drive for Win8.1 x64. ...