SSL refers to Secure Sockets Layer, a security protocol that has been replaced by Transport Layer Security (TLS). TLS is still commonly referred to as SSL.

learn more… | top users | synonyms

3
votes
0answers
552 views

MITM the Android emulator

I am trying to man-in-the-middle the Android emulator so I can decrypt the SSL-traffic with sslsniff. The problem is that the traffic doesn't seem to get routed through sslsniff, even when I have ...
3
votes
0answers
940 views

SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in ...
2
votes
0answers
15 views

Unable to browse to certain sites

I have a few guests on a XenServer host, and some sites ( both SSL and non SSL ) cannot be accessed by the XenHost and the Guests. Other machines on the same network can access these sites just fine, ...
2
votes
0answers
150 views

Why doesn't Firefox accept different Ports for SSL encryption other than 443

There is an IIS Webserver with different Sites (SSL Binding) because I can't configure IIS to listen on same Address and Port with different Certificates so I set the SSL Port direction in the ...
2
votes
0answers
66 views

SSL cert owner != localhost after creating SSH tunnel

I use an SSH tunnel to connect to my work's mail server, then tell my mail client to connect to server "localhost" on port "1993" (the port I chose for the tunnel). I have two different Ubuntu Precise ...
2
votes
0answers
927 views

Establish https on nonstandard port

I'm trying to estamblish https on port 55434 (different than standard 443). My nginx configuration looks like this: server { server_name example.org; listen 55434 ssl; ssl ...
2
votes
0answers
702 views

SSL proxy with stunnel

I'm trying to set an SSL connection with stunnel. Some kind of SSL proxy. Final aim Connect server1 (doesn't use SSL – only HTTP) to server3 (that uses only SSL, HTTPS only). My plan is server1: ...
2
votes
0answers
306 views

Decode SSL packets in WireShark

I have cert.cer, base64 x509 and a Wireshark dump in .pcap format. The packets are encoded, so how do I decode them? Now: [site-ip],443,http,xe.cer but it's still not working.
2
votes
0answers
3k views

Disable SSL hostname check in Chrome

How I disable SSL certificate error when CN does not match DNS name in Chrome? In IE, this is done by Tools -> Internet Options -> Advanced (tab) -> Scroll down to section "Security" -> checkbox: ...
1
vote
0answers
7 views

How to control SSL automatic activities in Wordpress php files

I have domain with one sub-domain. The domain has installed SSL with valid certificate but sub-domain doesn't have it. I installed two Wordpress, one for domain and one for sub-domain (clone it to ...
1
vote
0answers
25 views

Strange null bytes in CN from openssl req

I need to send CSR (certificate signing request) to the SSL authority for our wildcard domain SSL certificate. I see strange values in the CN (common name) field, for example ...
1
vote
0answers
52 views

nginx - ssl and www redirect configuration

this is related to: http://stackoverflow.com/questions/24538973/django-allowed-hosts-error-for-www-domain-and-ip-address i'm attempting to redirect www and non-ssl requests to ssl non-www domain for ...
1
vote
0answers
51 views

Java keyTool - append primary/secondary intermediate certificates to key store

I have already created a keystore (server.jks in the image) having imported the relevant key-pair. keytool -importkeystore -srckeystore server.p12 -destkeystore server.jks -srcstoretype pkcs12 I ...
1
vote
0answers
30 views

Is there a way to quickly disable all root certificates in Windows 7?

I'd like to temporarily disable all trusted root certificates and wondering if there is a quicker way than going through every single one of them, right-click Properties and selecting "Disable all ...
1
vote
0answers
23 views

Remote management on WRT630N via HTTPS

I have a Linksys WRT630N wireless router and am trying to configure remote management via HTTPS. I've chosen a nonstandard port and can successfully connect and manage the router remotely via HTTP, ...
1
vote
0answers
101 views

GnuTLS test 'chat' equivalent of OpenSSL s_client s_server

How can I set up a test encrypted "chat" with GnuTLS, equivalent to the OpenSSL s_client and s_server using GPG credentials? I would like to tell GnuTLS-serv and -cli to use keys generated with GPG ...
1
vote
0answers
26 views

How does one know if the Mail app on OSX is using SSL to connect to your email account or not?

I set up an email account, which is supposed to use SSL. But while setting it up Mail said that it "Could not send the password securely" to the server, and that If I send the password other people ...
1
vote
0answers
178 views

How to develop a Chrome extension that overrides SSL certificate error for self-signed certificate?

The process of adding a self signed certificate to the list of trusted certificates in Chrome is manual and tedious. I frequently access a trusted website that uses a self-signed certificate. As I am ...
1
vote
0answers
1k views

Chrome and Outlook can only make secure connections when user account has admin privileges

I have a co-worker who is set up as an admin user under Win XP SP3 and I'm trying to switch her to being a restricted user. The short story is that when I switch her account to restricted, Chrome ...
1
vote
0answers
63 views

Apache configured for HSTS, but SSLLabs/Chrome not acknowledging

I'm setting up a webserver and I've been checking it against SSLLabs and Chrome 31 to make sure the security is up to snuff. However neither Chrome nor SSLLabs seems to believe that strict transport ...
1
vote
0answers
68 views

SSL certificate for CNAME record

I have the CNAME record images.bob.com, which points to the images.susan.co.uk (images.bob.com. 1800 IN CNAME images.susan.co.uk.). I would like to ask for issuing SSL certificate for the ...
1
vote
0answers
874 views

SSL Error after upgrading to Windows 8.1

After upgrade my Windows 8 to Windows 8.1, I got this SSL Error: ...and this I have did some research and tried to change my system time up to date, reset my modem and use wireshark to see if ...
1
vote
0answers
281 views

Chrome ignores some imported certificates

On Windows 7 with Chrome 30. I have a few websites running on localhost over SSL. Visiting them always displays the standard "The site's security certificate is not trusted!" message from Chrome. I ...
1
vote
0answers
390 views

CIFS share via LDAP + SSL

I have NAS drive which is bound to an Open Directory LDAP server for authentication with SSL enabled. The NAS allows for CIFS shares to be accessed via LDAP authentication. (in this case the NAS is a ...
1
vote
0answers
36 views

How to only accept certificates issued by user-specified CA per domain?

Question Is it possible in Chromium or Firefox to only accept SSL certificates issued by a user-specified CA for a specific domain? Background When you have set up your own certificate authority ...
1
vote
0answers
68 views

Using Apache as a debug proxy for https traffic

I know that I should be using mitmproxy (or Charles, or Fiddler, or Burp Proxy), and that I can use Squid, but is it possible to use Apache to debug out going https traffic from my computer? That is, ...
1
vote
0answers
172 views

How to run secure voip traffic without using vpn

I use quintum tenor for voip traffic using VPN SSL Tunnel. VPN server is based in another country. VPN used enough bandwidth, and we need to reduce bandwidth consumption. Is there any SECURE way to ...
1
vote
0answers
545 views

Setting up IMAP/SSL on Ubuntu with Dovecot, Thunderbird, and a self-signed certificate

I have a new server that I am setting up. It currently has a very limited audience (just me), but I am trying to set up IMAPSSL and secure SMTP. Since the audience is so limited, I have decided to ...
1
vote
0answers
151 views

Weird redirection caused by SSL in all browsers

I have 2 websites, mydomain.com and mydomain.co. Here is the comparison of the 2 websites. mydomain.com | production site | purchased SSL certification from GoDaddy mydomain.co | development site ...
1
vote
0answers
985 views

Redirect IP to url for ISPConfig 3 administration

I am running a debian machine with ISPConfig 3.0.4.3. Yesterday I purchased a RapidSSL wildcard certficate and want to make sure my IPSConfig always loads the admin.mydomain.net url. Even if the user ...
1
vote
0answers
90 views

Installing a custom Root authority certificate for a Service Application

I have an Windows service application, that executes under a specific user account, that calls a remote web service via HTTPS. The certificate the remote server uses is issued by a Root authority ...
1
vote
0answers
414 views

Preventing Internet Explorer from “remembering” an old SSL certificate

A website I'm using has switched recently from a GoDaddy SSL certifcate to a StartCom certificate, which works fine in most cases. The original GoDaddy certificate expired last year. However, in ...
1
vote
0answers
348 views

Self-Signed Certificate and IIS 6.0, How to generate a Client Certificate

I am looking at generating a self-signed certificate, and only allow users who has client certificate installed on my web server. I am using IIS 6.0 with selfSSL to generate my .pfx web server ...
0
votes
0answers
9 views

Windows CA - Enable nsCertType extension - Standalone CA

I am using OpenSSL to generate cert requests to be used with OpenVPN. I am forced to use the Windows Server 2008 certificate authority. OpenVPN is complaining about the nsCertType not being set to ...
0
votes
0answers
14 views

RootCertificate popup does install

When connecting to my university's wifi, it keeps popping up with a certificate (root) that needs to be install, I select yes [yes|no|view details] But I am not sure if it installs the certificate ...
0
votes
0answers
9 views

FTPS certificate email address has different domain than the Organization name

Wondering if this should be of any concern. We received a FTPS ip which is SSL enabled. (This is not SFTP). Filezilla - the FTP client shows a certificate where the organization name say 'XYZ Inc' and ...
0
votes
0answers
14 views

How can I recover my SSL certificates on OSX?

Alright, so I screwed up. I was installing testing SSL on dovecot/postfix servers and I accidentally deleted my MacBook's SSL certificates. I went to Keychain, highlighted everything in ...
0
votes
0answers
45 views

SSL certificate error attempting to download Homebrew?

I've been trying to download and install Homebrew for my Mac (OS 10.9.4) using the install script on the home page, but the download fails with a SSL certificate error (see log below). I understand ...
0
votes
0answers
59 views

Chrome won't trust DigiCert SSL. I have to trust it manually.

I have been having this problem for a while. I have found this thread which exactly my problem but it didn't solve my problem. Why won't OS X trust GitHub's SSL certificate? I also tried ...
0
votes
0answers
66 views

Github stopped working recently, 07/26/2014?

I'm a pro user of github until it stopped working on the last saturday, the 26. of July, 2014. Since then, i'm becoming in my browser following SSL error: My IDE (IntelliJ) is becoming the same ...
0
votes
0answers
13 views

Regarding CRL Updation - Compliance

Could someone let me know if automatic updation of Certificate Revocation List is a mandatory requirement as per SSL specifications ? Thanks
0
votes
0answers
18 views

Server Certificates Missing in IIS

On my Windows Server 2012 R2 box, when I connect to it through Remote Desktop, I'm trying to setup a server certificate but in IIS, in the "IIS" group, there is no Server Certificates feature. I ...
0
votes
0answers
62 views

Magento | After SSL Setup, Images not shown

My problem is, i setup a Comodo Positive SSL on solempet.com When i changed the options for front page to secure https urls, images and css now shown. I mean site is not load properly and images, css ...
0
votes
0answers
23 views

rails ssl setup on Amazon EC2

Environment Amazon EC2 CentOS Rails 4.0.4 SSL certificates installed Chef My Rails config In my environment .rb (staging.rb and production.rb) I added this config.force_ssl = true Started ...
0
votes
0answers
39 views

Windows 7 IPsec IKEv2 EAP-TLS error

I have set-up Strongswan on a Ubuntu 14.04 server from the official package repo with IKEv2 and rightauth=eap-tls using our PKI infrastructure. I can connect just fine from Android and Linux but not ...
0
votes
0answers
37 views

OpenSSL, Converting CRT to PEM

I've been trying to use openssl to convert a .crt certificate to a .pem openssl.exe x509 -in server.crt -out openssl.pem -inform der -outform pem After using that command, I get unable to load ...
0
votes
0answers
13 views

Is it possible to combine my S/MIME public signing and encryption certificates into one certificate?

My company provides me with S/MIME certificates, but for some reason choose to issue separate certificates for signing and encrypting. Therefore, when I sign a message, the recipients aren't able to ...
0
votes
0answers
154 views

How to properly configure SSL certificates on a Synology NAS?

While Synology DSM is a wonderful product, that was designed to be easy to be used, it seems that there a few areas where it lacks documentation (even from online sources). In fact most of the ...
0
votes
0answers
211 views

How to install SSL certificate in the Trusted Root Certification Authorities Store?

Apologies in advance, I do not have an IT background and have never done this before, yet I am being asked to figure this out and to do so as soon as possible. Our organization is trying to update ...
0
votes
0answers
156 views

Can not connect to VNC server on Ubuntu 14.04 over SSL using winsokify

I found this thread: noVNC over SSL, and it helped me a lot. But I am getting an error message. You see my issue is that I get a session to the SSL interface but I get an error stating: unsupported ...