0
votes
1answer
17 views

Relationship of routers to networks

I was wondering, in networking, what is the relationship of routers to networks? Can the same router be the gateway for 2+ networks? For example, if I have a wireless router at home, can I configure ...
1
vote
1answer
30 views

Windows Networking - Treat two subnets as one network

We have an existing (old) network (10.0.0.0/24) and we're trying to add another (new) subnet (20.0.0.0/24) using a Cisco 2901 router. I added the appropriate routes and tested everything out. We're ...
2
votes
1answer
22 views

Active directory sites and services

I have 192.168.1.0/23 subnet for wired connection and 192.168.2.0/24 for wireless connection. Do I need to add 192.168.2.0 in AD Sites & services. Right now I have 192.168.1.0/24 added in the ...
0
votes
1answer
21 views

Double NAT with access to both gateway web interfaces

I have a Cisco Linksys E3000 home router that I appreciate. However, my new (but temporary) ISP will want me to use their Huawei router for their service once I get connected next week. This creates ...
0
votes
3answers
90 views

Connecting 2 different subnet masks

I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. ...
3
votes
1answer
176 views

Home network with two routers and just one Wifi

I know it is a pretty lame question, but I am not a pro in networking, so I will still ask it. And I will try to explain details where possible. I want to create the following setup: Phone line is ...
0
votes
0answers
16 views

Should we load smaller subnets into Active Directory

Our network team is splitting up the subnets in each of our offices from /16 and /18 subnets to multiple /24 subnets. Our systems team is not changing Active Directory sites and services to replicate ...
0
votes
2answers
57 views

How to find largest possible IPv4 network within specified range

Let's say, we are given a range of 192.168.101.64 - 192.168.102.128. What is the easiest way to find the largest possible IPv4 network within specified range, including network address, subnet mask ...
0
votes
2answers
56 views

Interview on network connections

I was on an interview for a web developer position and for some reason, in the test, there was a question about networks that sounded like this: Your PC ip address is (--something like--) ...
0
votes
1answer
33 views

Identify the TCP/IP classes respectively by beginning octets

I am busy studying for a network exam and I am stuck with this zinger: By studying the following beginning octets, identify the TCP/IP classes respectively 1-126 224-239 240-254 ...
0
votes
2answers
19 views

Add printer from different subnet

i.e My pc ip is 11.19.20.3 with gateway 11.19.20.1 I have a printer with ip 11.19.22.25 with gateway 11.19.22.1 How can I add this printer to my pc?
0
votes
0answers
454 views

How to setup two-way routing with Tomato Wireless Client mode (different subnets)

Currently I have a Netgear R7000 as my main router, with internet coming from a Moto Surfboard SB6141 Cable Modem. I have a Linksys E3000 running Toastman TomatoUSB connected to the R7000 as a ...
-1
votes
1answer
49 views

Creating Subnet Mask [closed]

ive been set this task. given the network 140.50.0.0/16 Create a subnet mask for 400 subnets with the maximum possible number of hosts in each subnet. My question is how do i create a subnet mask?? ...
0
votes
2answers
296 views

How do I get a /23 subnet mask from 172.16.0.0 /21 network address?

I have 172.16.0.0 /21 My mask is 255.255.248.0 I have an IP range from 172.16.0.0 to 172.16.7.255 255.255.248.0 11111111.11111111.11111000.00000000 Network------------------------- ...
-1
votes
1answer
54 views

Subnet mask for maximum number of hosts?

How would I configure a subnet mask for a maximum number of hosts on a network segment? For example, let's say I need a maximum of 6 hosts per network segment for a Class C address.
0
votes
2answers
49 views

Ways to differentiate between home and office private network

Let us consider there are two networks 1) home network and 2) office network. I have an application which will get the system IP and MAC Address of the installed machine while launching the ...
2
votes
2answers
87 views

Determine the best subnet mask for the 172.29.0.0 network, with 30 subnets and 1,100 host on each subnet

This was a practice question I found online: Question: You are designing a subnet mask for the 172.29.0.0 network. You want 30 subnets with up to 1100 hosts on each subnet. What subnet mask ...
0
votes
4answers
405 views

Why my subnet mask is not matching with my IP address?

I have a class 'B' IP address 172.16.XXX.XXX in my machine. My Subnet mask is 255.255.255.XXX. I am studying networking now. So until now I didn't care about masking about all. But from Wikipedia I ...
1
vote
1answer
2k views

Communication possible between 192.168.0.x and 192.168.1.x?

I have a problem I encounter on a regular basis. I have an access point with a fixed 192.168.0.x IP address. My network is 192.168.1.x. The problem is when I plug the access point into my network, it ...
0
votes
2answers
110 views

Devices on subnet cannot access each other but can access internet

I live in university halls and only have access to the internet and the network through one ethernet port. I have a TP-Link R860 router (wired only) and a TP-Link simple switch. If I connect using ...
0
votes
1answer
38 views

Remote network administration, solving 2 device 2 subnet merge

The problem: 1.) No Physical Access 2.) Very basic on site help 3.) Combining 2 subnets on 2 routers Now we know i cant go on site to move cords around so here are the current cord ...
1
vote
2answers
223 views

Why nic with incorrect subnet mask can still ping the gate way?

At first, my network config was like this: $ ip a 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 3c:97:0e:bd:b1:68 brd ff:ff:ff:ff:ff:ff ...
0
votes
1answer
16 views

Sub net, 2^n or 2^n - 2?

To calculate how many bits I need to borrow when designing a subnet, is it 2^n = X or 2^n - 2 = X X being the number of subnets desired. I've found two websites each giving one of those ...
0
votes
2answers
375 views

Cisco Packet Tracer error “Invalid IP for this subnet mask entered”

im using cisco packet tracer configuring pc ip and this error came out "Invalid IP for this subnet mask entered"
0
votes
2answers
94 views

What IP's should the servers be assigned? [closed]

I have got 4 subnets (calculated using online calculators) The major network is: 172.16.0.0/16 The students subnet having the highest IP requirement /22 mask gets 172.16.0.1 - 172.16.3.254 as ...
2
votes
1answer
501 views

How many subnets are needed?

I'm just starting out with networks. I'm trying to determine how many subnets are needed for this network: BRANCH1, BRANCH2 and HQ are routers. The Boxes between routers and PCs are switches. The ...
2
votes
3answers
269 views

Broadcast address in IPV4

I have a small network with the subnet mask 255.255.255.240 and the IP range is 192.168.2.1 - 192.168.2.12. From 192.168.2.1, I want to broadcast a packet. I don't want this packet to go anywhere ...
1
vote
1answer
349 views

What is major network mask and subnet mask

I've been served with a question to find Major Network Mask and I've only given Host IP address and sub-net mask. I have to find the Major Network Mask using Host IP and sub-net mask. Another ...
1
vote
1answer
922 views

How to find CIDR subnet for a public Internet IP address?

Usually I do not worry about subnet of an IP address on the public Internet, but after I began using Amazon EC2 firewall, it got me thinking. EC2 firewall configuration requires an IP to be written ...
1
vote
1answer
192 views

Regarding IP subnetting process

Professor taught the following scenario. An organization has purchased a Class-C address 216.21.5.0 and would like to use it to address its offices at Arizona, Florida and California. It has the ...
0
votes
1answer
45 views

Unable to Reach Phone's Web Interface

My network admin is out on vacation this week, so I can't get the answer from him. My office's network shares its bandwidth between its phones and its computers. The phones have IPs like 10.22.0.* ...
1
vote
3answers
349 views

Network addressing without wasting IP addresses

I know how to do the classic "network addressing" when I am allowed to waste IP addresses. For example, if I need to hook up 9 computers, I could use a /28 subnet, which allows 16 hosts to be mapped ...
0
votes
1answer
50 views

Accessing a subnet

I've a network configured in this way ROUTER 1 (PUBLIC IP - PC1) ----> ROUTER 2 ----> PC2 (LOCAL IP) I can locally access PC1 (192.168.1.2) from PC2 (10.0.0.2), but cannot do the opposite: ...
-1
votes
3answers
3k views

How can I put two wireless routers on the same subnet? [closed]

I have two Netgear wireless routers; one primary (WNR2000) connected to the Internet, and a secondary (WNR1000) connected to the primary via a long Ethernet cable to the other side of my home. A LAN ...
0
votes
1answer
176 views

How to force to send data to router (on L3) instead sending directly? (on L2)

I have a public IP-addr on one machine: a.b.c.156/32 The GW is a.b.c.133 (which is in the /27 network with its gateway a.b.c.129) I statically added an arp route: sudo arp -an a.b.c.133 at ...
0
votes
1answer
33 views

Emulate Network address in a LAN

My college has a network, their dhcp will allot us a xx.xx.67.xx ip (Wifi), i found that in their lab they use a different proxy that is restricted for our ip range(Squid) (xx.xx.1.xx is their ip ...
0
votes
2answers
79 views

Multiple subnets communicating with Server

I have three clients, each one in a different subnet like this: Client 1: 192.168.2.11/26 (network .2.0 ; broadcast .2.63) Client 2: 192.168.2.72/26 (network .2.64 ; broadcast .2.127) Client 3: ...
0
votes
1answer
119 views

Is there a benefit of setting up VLANs if my subnets are wired separately?

I have 2 subnets within my office: 172.16.1.0/24 and 172.16.2.0/24. All devices on each subnet are wired independently from each other into the server closet. Previously each subnet had it's own ...
0
votes
1answer
54 views

2 Subnets see each other

I have 2 routers that need to be on different subnets. The reason is that router 1 is connected to the internet outside the US where I live. Router 2 is behind router 1 and has a VPN server ...
0
votes
0answers
1k views

Two subnets block traffic between them but allow internet

I have 192.168.1.1/24 network that has a switch and several access points .There is a adsl modem at 192.168.1.1 . I want to add a new network 192.168.2.1/24 with its own access point and switch. so ...
2
votes
2answers
1k views

Is 225.225.225.128 a valid subnet mask?

I have been told that we have two devices on a network: 10.40.225.142 and 10.40.225.144 These devices both have Gateway 10.40.225.129 Subnet mask 225.225.225.128 (note 225 is Not a typo) These ...
0
votes
1answer
426 views

Using local SSH tunnel from remote machine/another subnet

I have a Linux machine (box 1) with Internet service connected to a Wifi router sitting right next to it, through Ethernet (eth0). The purpose of this router is so I can share this Internet connection ...
0
votes
1answer
136 views

how to take subnet mask for an IP

I found this problem in a textbook, and I do not understand the solution: Find the subnet which the IP: 192.168.1.25 belongs to. Here is what they did: 255.255.255.224 for 192.168.1.25 and do ...
0
votes
1answer
42 views

What aids exist in RHEL v6 to calculate subnets without an internet connection?

The Red Hat version of the ipcalc program is very basic compared with some other versions that are available. Suppose you didn't have an internet connection and could only use tools that exist ...
0
votes
2answers
3k views

“Destination port unreachable” when pinging computer in another subnet

In my home network, I connect to the Internet through a router (192.168.1.1). I also have another router (192.168.1.15, 192.168.2.1), this one using OpenWRT, configured as a wireless client. One of my ...
9
votes
4answers
652 views

How to put two subnets next to each other?

I've been using this calculator http://www.subnet-calculator.com/cidr.php, and I'm trying to figure out how to put two different subnets next to each other. For example, I want to have a /27 subnet ...
2
votes
3answers
267 views

What is the effect or purpose of subnet on client PCs?

I understand that the subnet mask when combined with an IP is used to define the range of IPs that the router is responsible for routing. e.g. a router with 192.168.3.1 subnet 255.255.254.0, will ...
0
votes
3answers
2k views

Accessing computer in other subnet in the same network

At my university, we use the Eduroam wireless. It gives my Tablet 131.220.206.8 and my computer 131.220.202.17. I'd like to SSH to the Tablet, but I cannot connect to it. How can I access computers ...
0
votes
2answers
276 views

Splitting and connecting a small subnet

It's been a while since I built out a network so bear with me as I've lost some of the nomenclature. Given "5" usable static IP addresses from our ISP is it possible to use 3 of them for globally ...
0
votes
1answer
70 views

Subnets and gateways

I have a doubt with subnets and their gateways. For example assume I have four subnets using a mask of 255.255.255.192: A) 192.168.1.0 B) 192.168.1.64 C) 192.168.1.128 D) 192.168.1.192 If the ...