A subnetwork, or subnet, is a logically visible subdivision of an IP network.

learn more… | top users | synonyms

0
votes
0answers
22 views

Using HTTPS over HTTP for requests between servers in a subnet AWS?

Are there any reasons to use HTTPS instead of HTTP for requests between my servers running in a private subnet on AWS? All requests going in/out of the subnet will done via HTTPS to prevent sniffing. ...
6
votes
3answers
8k views

Why subnet mask for IP 10.0.1.4 is 255.255.255.0?

Well I'm not sure whether I'm missing something here. But all I've read is that if first octet of IP is within 0 - 127 then it is categorized as Class A subnet and correspondingly Subnet Mask for ...
1
vote
0answers
12 views

VPN access but can't Remote Desktop after changing subnet

I have VPN access setup through my Meraki MX100 firewall, and can VPN no problem. Remote Desktop was working perfectly fine on the VPN but a couple of days ago just stopped working. I get the usual ...
1
vote
1answer
35 views

Assigning IP addresses and subnetting on a home network

After 4 days of trying, googling, and tearing my hair, I have managed to bring down the internet at my home. I needed to implement the network as follows, however my efforts have managed to bring down ...
-1
votes
1answer
71 views

subnet id, why option (2) is wrong? [closed]

An Internet Service Provider (ISP) has the following chunk of CIDR-based IP addresses available with it: 245.248.128.0/20. The ISP wants to give half of this chunk of addresses to Organization A, and ...
0
votes
1answer
139 views

Broadcast address for address 144.16.95.255?

A subnetted Class B network has the following broadcast address : 144.16.95.255. Its subnet mask (a) is necessarily 255.255.224.0 (b) is necessarily 255.255.240.0 (c) is necessarily 255.255.248.0 (...
0
votes
0answers
24 views

Understanding subnet mask on Ubuntu 14.04

Currently my broadband ISP connection is down. I accidentally altered my subnet mask id on Network Manager. When I entered the original value again it does not save it. Instead it saves 192.0.0.0. ...
-2
votes
1answer
34 views

Networking (subnet)

I am new to networking and I am trying to learn about it. I can't make my on subnets. My questions are: What does "there are possible 32 hosts" mean? Do hosts address and ip addresses change from ...
0
votes
1answer
27 views

What does (Preferred), (Tentative) and (Duplicate) mean against an IPv4 Address with ipconfig

I have been tinkering with subnets and have noticed the above as annotations to the IPv4 line of ipconfig. IPv4 Address. . . . . . . . . . . : 192.168.1.241(Tentative) IPv4 Address. . . . . . ...
0
votes
1answer
2k views

Can't ping to computer but reverse ping can

So Computer 1 can ping to computer 2 but reverse it can't Setup: Router A (192.168.0.xxx) 255.255.255.0 > Router B (192.168.1.xxx) 255.255.255.0 So computer1 on Router B can ping to computer2 on ...
0
votes
1answer
24 views

subneting a small store

I have a friend with this small store/cyber and want to divide the network like this clients can only see other clients registers can see other registers admins can see everyone I currently have a ...
3
votes
3answers
79 views

Does a typical home router support classless IP address?

All typical home routers I know of allow us to set a custom subnet mask, and because of this, I am really curious about whether they support the use of classless addressing scheme, meaning that in the ...
0
votes
1answer
5k views

When I change the subnet for the LAN interface on a Sonicwall firewall the WAN interfaces go haywire. What should I do?

Our company's old subnet was 255.255.255.0. To adjust for growth we decided to implement a 255.255.248 subnet. Upon changing this in our Sonicwall's LAN interface, our WAN connections quit working ...
2
votes
1answer
168 views

Subnetting an already subnetted address further

I'm a little lost with a question given by my instructor in class and just wanted some clarification on my work. The question is - Given: IP Address: 133.64.128.0 /24 Want: 37 networks ...
0
votes
1answer
44 views

Access subnetwork by networks IP

I have a router in my house which has some IPs assigned. By default the router creates a sub-network. Can I access a device in my sub-network (IP example: 192.168.1.3) from outside that sub-network ...
0
votes
1answer
27 views

How route two subnets when they are connect to a same router?

I have a Router has 4 ethernet ports, eth0 to eth3, with OpenWRT inside and such configurations: Interface lan1 involves only eth0, IP address 10.10.0.1/16 Interface lan2 involves only eth1, IP ...
0
votes
0answers
22 views

We're having our receipt printer provide a very unusual subnet mask. Has anyone experienced anything like this before?

Thanks in advance to anyone who can help me out with this. We're using a custom receipt printer which was bricked in DHCP for quite a while. Every method we used to change this gave no result. We've ...
3
votes
4answers
39k views

Why can't my OpenVPN client access machines on same LAN as OpenVPN server?

I have configured OpenVPN on my Linux server and Windows client according to the instructions here. My client can access the server, but can't get any further onto the LAN. My Server is 10.23.29.64/...
0
votes
1answer
69 views

Setup 2 VLANs with 2 subnets?

I have one modem - Cisco DPC3010, 2 routers - Netgear WGR614v7 and Linksys BEFSR41v2, and a managed switch - TP-Link TL-SG108E. Everything seems to be setup correctly for the 2 subnets but I can't ...
1
vote
3answers
282 views

2 routers, 2 subnets?

Firstly I will explain why I require this setup. I have bought an ASICMiner Cube for mining Bitcoin. It frequently stops mining until I reset it, which is quite troublesome. After reading the ...
1
vote
2answers
85 views

Practical (not theoretical) Subnetting 192.168.0.0/25

The Situation I have a Netgear WGR614v7 router (wireless disabled). Hosts in both subnets should have internet access but should not be able to ping hosts across the subnets. I want to split my ...
2
votes
2answers
34 views

Is this subnetted IP address valid?

I'm learning subnetting at the moment and I'm unsure whether this is considered a valid IP address. 150.16.5.255/21 My teacher asserts that this is invalid because it is a broadcast address of one ...
1
vote
2answers
107 views

LAN to LAN with different subnet

Is it possible to have 2 routers to communicate to each other via LAN to LAN (not LAN to WAN) despite both have different subnet? Topo: Router 1 (192.168.1.0/24) Router 2 (10.0.0.0/24) For ...
0
votes
0answers
21 views

Is there any way to route between more than 2 subnets on a single (home-spec) router?

I'm not a typical network admin, it's all new to me. But I've done my homework, and I'm expecting the answer to be a flat "no", but I decided to ask anyway - just in case I'm missing something. Just ...
-3
votes
1answer
23 views

What are the differences between a private network and a subnetwork?

And what are the advantages of creating subnetworks if computers are assigned different IP addresses from the same range and can communicate with each other also with switches?
0
votes
1answer
44 views

Accessing one subnet (Allnet) from another (Thomson TG712) on a local network?

I have this situation: The Thomson Gateway TG712 is received from provider, is a phone line/DSL modem, with 4 wired LAN (RJ45) connectors, as well as wireless. It assigns to itself 192.168.1.254, ...
-4
votes
2answers
95 views

Class c private address of 192.168.1.0 what subnet for most amount of host addresses?

Can someone help me out? I'm sure it's 255.255.255.192 since we have to make it into 3 networks. Am I correct? You are the network administrator for a health authority in Idaho. The administration ...
0
votes
1answer
48 views

how to set up subnetwork at home?

I'm trying to achieve something that, I believed would have been very simple to set up, but I'm struggling at making this work. Basically, I have a ISP router with an internet connection, from there, ...
1
vote
0answers
924 views

Why can't I change the subnet IP address in the Virtual Network Editor in VMware Workstation?

In the Virtual Network Editor in VMware Workstation (version 9.0.0 build-812388), I want to change the subnet IP address or one of my host-only virtual networks from 192.168.203.0 to 192.168.124.0 (...
0
votes
0answers
24 views

IP overlap with cisco packet tracer simulation

PC 1 Network IP fa1/0: 192.168.1.7 /27 IP range: 192.168.1.0-31 Subnet Mask: 255.255.255.224 Router - When I type in the router IP fa1/0: 192.168.1.7 255.255.255.224 I keep getting error saying that ...
0
votes
0answers
14 views

MS Routing Server not routing from Hyper-V External Adapter

I've searched this issue but i'm not able to resolv it. I'm not able to route to a subnet! Here is a high level overview of my env: Network Overview What does work: From the MS Routing Server: ...
4
votes
3answers
6k views

I'm using Cisco Packet Tracer for Simulation and got error “ip address overlaps with..etc”

The 1st row is for my router and the 2nd row is for my LAN. What's wrong? Is my IP addressing and subnetting wrong? I already checked my configuration.
1
vote
0answers
2k views

How to setup two-way routing with Tomato Wireless Client mode (different subnets)

Currently I have a Netgear R7000 as my main router, with internet coming from a Moto Surfboard SB6141 Cable Modem. I have a Linksys E3000 running Toastman TomatoUSB connected to the R7000 as a ...
0
votes
0answers
31 views

How to access a pc on local network from main network

We are in college and every room of two people has only one lan port. We belong to a college subnet: 172.31.80.218/26 Now I am connected to our lan port and have the above IP. I create a wifi hotspot ...
1
vote
1answer
43 views

How can I make my routers interconnected?

I work in a small business that has seven of the same routers around the building, which means seven SSIDs. What I am wondering is, is there anyway to make them interconnected so that they can ...
2
votes
2answers
176 views

Use ubuntu 14.04.3 box as a wireless access point, no dhcp server and eth0 to wlan0 bridging

I noticed that I had a 300Mbps N wireless adapter laying arround so I decided to use it in my ubuntu server to expand the range of my local nework, that server is being used as a samba and ftp server, ...
1
vote
3answers
41 views

Routing across subnets

We have an IP phone system on a 172.16.x.x address. This is a live system which we use every day so we know it works. The confusing part is; all the desk phones are on 172.16.1.x whereas the gateway ...
0
votes
2answers
35 views

Windows subnetmask, what's the use?

I'm in a company network where we're using two subnets: 192.168.0.* and 192.168.3.*. These are my IP's: 192.168.0.97: PC / testserver host 192.168.0.108: laptop 192.168.3.192: mobile phone The ...
0
votes
0answers
17 views

Linking Subnets Over DDWRT Wireless Client

This ones had me going for a few days. I have a Uverse supplied Motorola NVG589 that supplies our TV, phone, and wireless internet. In my room I have some networking gear which include an ASUS RT-...
0
votes
0answers
20 views

Route all WAN traffic from a subnet through a separate ISP-connected subnet

I have 2 routers that I will call, HOME_ROUTER and WORK_ROUTER. HOME_ROUTER is for home use and is connected to my ISP and WORK_ROUTER is for work use and is connected to noisy video encoders and ...
1
vote
1answer
2k views

pix 501, static route to d-link router (different subnet)

I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like ...
0
votes
2answers
2k views

Query site for given ip from AD sites and services

Windows Active Directory maintains a list of subnet to sites assignments (in "Active Directory - Sites and Services" -> Sites -> Subnets). The subnet-to-site associationas ar used, obviously, by ...
0
votes
1answer
30 views

Windows 7 firewall different subnets

I'm on a large company network with different subnets. There are a few win7 computers that I have admin rights on, but I'm not able to access their drives through different subnets. I can access the ...
0
votes
1answer
34 views

Guest Network and NAS

I am trying to setup a network where I can achieve several things. I might be overthinking this, but here is how I envision it working: I am willing to use 2 or 3 routers I want a network or subnet ...
0
votes
0answers
36 views

Cascading Cisco RV180 and Linksys E2000

I am trying to cascade 2 routers in my home network. I have an Actiontec DSL modem connected to the WAN port of my Cisco RV180. I am trying to connect a second router, a Linksys E2000, to my ...
-1
votes
3answers
98 views

What are the best Subnet IDs for maximum number of hosts?

I need help with this problem. I know it must be either A or D since subnet mask 255.255.255.224 has the most amount of hosts. I'm confused on subnet IDs could anyone clarify why subnet ID 224 would ...
0
votes
2answers
54 views

Identify the TCP/IP classes respectively by beginning octets

I am busy studying for a network exam and I am stuck with this zinger: By studying the following beginning octets, identify the TCP/IP classes respectively 1-126 224-239 240-254 ...
-1
votes
2answers
43 views

What is the correct subnet mask to use on a Class B network with a 10-bit subnet identifier?

I thought it was D but I got it wrong does anyone know what the correct answer is and why? A. 255.192.255.255 B. 255.255.255.192 C. 255.255.192.0 D. 255.192.0.0
0
votes
2answers
98 views
0
votes
0answers
38 views

I FUBAR'd the IP, subnet, and VLAN settings. Now how to access managed switch?

I have a Dell powerconnect 2748. I think I have done messed it up though when setting it up because so far I have not been able to access the webconfig of the switch after I changed some settings I ...