A subnetwork, or subnet, is a logically visible subdivision of an IP network.

learn more… | top users | synonyms

0
votes
2answers
398 views

What is the first valid host on the subnetwork that the node 192.168.197.13 255.255.255.252 belongs to?

Does anyone have any ideas what the answer to this is? What is the first valid host on the subnetwork that the node 192.168.197.13 255.255.255.252 belongs to? I calculated the answer myself, but got ...
1
vote
1answer
6k views

Communication possible between 192.168.0.x and 192.168.1.x?

I have a problem I encounter on a regular basis. I have an access point with a fixed 192.168.0.x IP address. My network is 192.168.1.x. The problem is when I plug the access point into my network, it ...
0
votes
2answers
280 views

Devices on subnet cannot access each other but can access internet

I live in university halls and only have access to the internet and the network through one ethernet port. I have a TP-Link R860 router (wired only) and a TP-Link simple switch. If I connect using ...
0
votes
1answer
305 views

how do I setup my D-link DSR250n to use openvpn server

My aim is to make my Iphone connect remotely (and securely) to my home network and get from the DHCP (the d-link router) IP on the same subnet. This is because I have an client app that broadcasts on ...
1
vote
1answer
799 views

How do you route within an Amazon VPC subnet?

I have an Amazon Virtual Private Cloud that looks like this: 10.40.1.1 Internet Gateway 10.40.1.5 My OpenVPN Instance 10.40.1.100 My Windows Box What I want is traffic from the Windows box ...
0
votes
1answer
54 views

Remote network administration, solving 2 device 2 subnet merge

The problem: 1.) No Physical Access 2.) Very basic on site help 3.) Combining 2 subnets on 2 routers Now we know i cant go on site to move cords around so here are the current cord ...
1
vote
2answers
964 views

How to create a subnet at home with Linksys router

My home network consists of my ISPs router (Thompson TG585 v8) which is giving out both WIFI and Ethernet LAN connections on the 192.168.1.x range. The router's LAN address is 192.168.1.254. This ...
-1
votes
1answer
82 views

routing table, ip address for outgoing packet

Network Destination Netmask Gateway Interface 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.8 ...
1
vote
2answers
507 views

Why nic with incorrect subnet mask can still ping the gate way?

At first, my network config was like this: $ ip a 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 3c:97:0e:bd:b1:68 brd ff:ff:ff:ff:ff:ff ...
0
votes
1answer
117 views

How to Browse Machine on Sub-Network

How can I browse a machine on a sub-network? Our primary network addresses are at 192.168.1.x In our LAN we also have a little wireless Netgear router with some devices connected to it, which ...
0
votes
1answer
24 views

Sub net, 2^n or 2^n - 2?

To calculate how many bits I need to borrow when designing a subnet, is it 2^n = X or 2^n - 2 = X X being the number of subnets desired. I've found two websites each giving one of those ...
0
votes
2answers
645 views

Cisco Packet Tracer error “Invalid IP for this subnet mask entered”

im using cisco packet tracer configuring pc ip and this error came out "Invalid IP for this subnet mask entered"
0
votes
2answers
1k views

192.168.2.xy can't access 192.168.1.xy (: 255.255.255.0)

My goal is to access my NAS from a PC, but NAS is not reachable. Situation Here is my network configuration: Router 1: 192.168.2.1 : 255.255.255.0 Router 2: 192.168.1.1 : 255.255.255.0 NAS: ...
0
votes
2answers
112 views

What IP's should the servers be assigned? [closed]

I have got 4 subnets (calculated using online calculators) The major network is: 172.16.0.0/16 The students subnet having the highest IP requirement /22 mask gets 172.16.0.1 - 172.16.3.254 as ...
0
votes
0answers
1k views

Windows 7 can ping but can't see device on other subnet

I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 ...
2
votes
1answer
1k views

How many subnets are needed?

I'm just starting out with networks. I'm trying to determine how many subnets are needed for this network: BRANCH1, BRANCH2 and HQ are routers. The Boxes between routers and PCs are switches. The ...
2
votes
3answers
479 views

Broadcast address in IPV4

I have a small network with the subnet mask 255.255.255.240 and the IP range is 192.168.2.1 - 192.168.2.12. From 192.168.2.1, I want to broadcast a packet. I don't want this packet to go anywhere ...
1
vote
1answer
604 views

What is major network mask and subnet mask

I've been served with a question to find Major Network Mask and I've only given Host IP address and sub-net mask. I have to find the Major Network Mask using Host IP and sub-net mask. Another ...
1
vote
0answers
421 views

Why can't I change the subnet IP address in the Virtual Network Editor in VMware Workstation?

In the Virtual Network Editor in VMware Workstation (version 9.0.0 build-812388), I want to change the subnet IP address or one of my host-only virtual networks from 192.168.203.0 to 192.168.124.0 ...
1
vote
1answer
1k views

How to find CIDR subnet for a public Internet IP address?

Usually I do not worry about subnet of an IP address on the public Internet, but after I began using Amazon EC2 firewall, it got me thinking. EC2 firewall configuration requires an IP to be written ...
1
vote
1answer
271 views

Regarding IP subnetting process

Professor taught the following scenario. An organization has purchased a Class-C address 216.21.5.0 and would like to use it to address its offices at Arizona, Florida and California. It has the ...
0
votes
1answer
47 views

Unable to Reach Phone's Web Interface

My network admin is out on vacation this week, so I can't get the answer from him. My office's network shares its bandwidth between its phones and its computers. The phones have IPs like 10.22.0.* ...
1
vote
3answers
477 views

Network addressing without wasting IP addresses

I know how to do the classic "network addressing" when I am allowed to waste IP addresses. For example, if I need to hook up 9 computers, I could use a /28 subnet, which allows 16 hosts to be mapped ...
0
votes
1answer
53 views

Accessing a subnet

I've a network configured in this way ROUTER 1 (PUBLIC IP - PC1) ----> ROUTER 2 ----> PC2 (LOCAL IP) I can locally access PC1 (192.168.1.2) from PC2 (10.0.0.2), but cannot do the opposite: ...
-1
votes
3answers
5k views

How can I put two wireless routers on the same subnet? [closed]

I have two Netgear wireless routers; one primary (WNR2000) connected to the Internet, and a secondary (WNR1000) connected to the primary via a long Ethernet cable to the other side of my home. A LAN ...
0
votes
1answer
1k views

2 TP-Link routers are connected

I have two TP Link routers, one is connected to the ISP and the other's WAN is connected to one of my Ethernet Ports (assigned IP from router1 192.168.1.200). Hosts in the 2nd router (192.168.0.0/24) ...
0
votes
1answer
198 views

How to force to send data to router (on L3) instead sending directly? (on L2)

I have a public IP-addr on one machine: a.b.c.156/32 The GW is a.b.c.133 (which is in the /27 network with its gateway a.b.c.129) I statically added an arp route: sudo arp -an a.b.c.133 at ...
0
votes
1answer
33 views

Emulate Network address in a LAN

My college has a network, their dhcp will allot us a xx.xx.67.xx ip (Wifi), i found that in their lab they use a different proxy that is restricted for our ip range(Squid) (xx.xx.1.xx is their ip ...
1
vote
2answers
103 views

Multiple subnets communicating with Server

I have three clients, each one in a different subnet like this: Client 1: 192.168.2.11/26 (network .2.0 ; broadcast .2.63) Client 2: 192.168.2.72/26 (network .2.64 ; broadcast .2.127) Client 3: ...
-1
votes
1answer
99 views

If I have a subnet mask of 255.255.255.0, what is the next valid subnet mask address [closed]

If I have a subnet mask of 255.255.255.0, what is the next valid subnet mask address on either side (above or below)
0
votes
1answer
141 views

Is there a benefit of setting up VLANs if my subnets are wired separately?

I have 2 subnets within my office: 172.16.1.0/24 and 172.16.2.0/24. All devices on each subnet are wired independently from each other into the server closet. Previously each subnet had it's own ...
1
vote
0answers
312 views

Shared Folders - Network Resource not Available

We have five computers (example "COMP1", "COMP2", etc.) at a remote site hooked-up to our domain. Each computer has a shared folder which gives full permissions to the local administrators group. To ...
0
votes
1answer
68 views

2 Subnets see each other

I have 2 routers that need to be on different subnets. The reason is that router 1 is connected to the internet outside the US where I live. Router 2 is behind router 1 and has a VPN server ...
0
votes
2answers
9k views

Lan to Wan setup how to connect two subnets

I hope someone can help me with issues I have with my home network. I have a Billion 7700N modem/router and currently I added a Western Digital N600 dual band router. By default (following setup DVD ...
0
votes
1answer
2k views

Two subnets block traffic between them but allow internet

I have 192.168.1.1/24 network that has a switch and several access points .There is a adsl modem at 192.168.1.1 . I want to add a new network 192.168.2.1/24 with its own access point and switch. so ...
0
votes
1answer
520 views

How can i connect 2 PC with different subnets in 1 Switch in 1 Router

Well here is the problem...I want to connect 2 PC pc_1: 10.1.1.18/29 pc_2: 10.1.1.66/29 with 1 switch pc_1 -> Switch Fa0/1 pc_2 -> Switch Fa0/2 and this switch to a router ...
2
votes
2answers
2k views

Is 225.225.225.128 a valid subnet mask?

I have been told that we have two devices on a network: 10.40.225.142 and 10.40.225.144 These devices both have Gateway 10.40.225.129 Subnet mask 225.225.225.128 (note 225 is Not a typo) These ...
0
votes
1answer
628 views

Using local SSH tunnel from remote machine/another subnet

I have a Linux machine (box 1) with Internet service connected to a Wifi router sitting right next to it, through Ethernet (eth0). The purpose of this router is so I can share this Internet connection ...
0
votes
1answer
173 views

how to take subnet mask for an IP

I found this problem in a textbook, and I do not understand the solution: Find the subnet which the IP: 192.168.1.25 belongs to. Here is what they did: 255.255.255.224 for 192.168.1.25 and do ...
0
votes
2answers
1k views

Port forwarding from modem to a subnet

I have a webcam server that requires port forwarding to be able to access it from Internet, but the webcam server is located in a subnet and I couldn't make it work. Description of my setup: There ...
0
votes
1answer
46 views

What aids exist in RHEL v6 to calculate subnets without an internet connection?

The Red Hat version of the ipcalc program is very basic compared with some other versions that are available. Suppose you didn't have an internet connection and could only use tools that exist ...
1
vote
1answer
902 views

Window 8 machine cannot ping devices on same subnet

After returning from vacation during which several Windows updates were applied and my router suffered a hard power cycle, my Windows 8 Desktop can no longer ping other devices on the same subnet. ...
0
votes
2answers
4k views

“Destination port unreachable” when pinging computer in another subnet

In my home network, I connect to the Internet through a router (192.168.1.1). I also have another router (192.168.1.15, 192.168.2.1), this one using OpenWRT, configured as a wireless client. One of my ...
9
votes
4answers
729 views

How to put two subnets next to each other?

I've been using this calculator http://www.subnet-calculator.com/cidr.php, and I'm trying to figure out how to put two different subnets next to each other. For example, I want to have a /27 subnet ...
2
votes
3answers
377 views

What is the effect or purpose of subnet on client PCs?

I understand that the subnet mask when combined with an IP is used to define the range of IPs that the router is responsible for routing. e.g. a router with 192.168.3.1 subnet 255.255.254.0, will ...
0
votes
3answers
3k views

Accessing computer in other subnet in the same network

At my university, we use the Eduroam wireless. It gives my Tablet 131.220.206.8 and my computer 131.220.202.17. I'd like to SSH to the Tablet, but I cannot connect to it. How can I access computers ...
0
votes
2answers
364 views

Splitting and connecting a small subnet

It's been a while since I built out a network so bear with me as I've lost some of the nomenclature. Given "5" usable static IP addresses from our ISP is it possible to use 3 of them for globally ...
4
votes
2answers
7k views

How to create a separate subnet for wireless access?

I need to configure my wireless router so all wireless devices are on a different subnet (192.168.2.1). The wireless devices should be able to access the internet, but ideally not the workstations on ...
0
votes
1answer
73 views

Subnets and gateways

I have a doubt with subnets and their gateways. For example assume I have four subnets using a mask of 255.255.255.192: A) 192.168.1.0 B) 192.168.1.64 C) 192.168.1.128 D) 192.168.1.192 If the ...
0
votes
1answer
607 views

Subnetting an IP address (172.16.0.0/12) into 2 subnets

Say I have the private network address 172.16.0.0/12 and I want to split it into 2 subnets. There are 12 bits used for the network number leaving 20 bit for the host number. I use 1 of these host ...