A subnetwork, or subnet, is a logically visible subdivision of an IP network.

learn more… | top users | synonyms

3
votes
1answer
98 views

Active directory sites and services

I have 192.168.1.0/23 subnet for wired connection and 192.168.2.0/24 for wireless connection. Do I need to add 192.168.2.0 in AD Sites & services. Right now I have 192.168.1.0/24 added in the ...
2
votes
1answer
19 views

Why am I having connection difficulties across two subnets?

I'm attempting to wirelessly connect my neighbor's home network with mine. We each have our own internet services and subnets which we want to preserve, but still be able to access services between ...
2
votes
1answer
1k views

Window 8 machine cannot ping devices on same subnet

After returning from vacation during which several Windows updates were applied and my router suffered a hard power cycle, my Windows 8 Desktop can no longer ping other devices on the same subnet. ...
1
vote
1answer
35 views

Assigning IP addresses and subnetting on a home network

After 4 days of trying, googling, and tearing my hair, I have managed to bring down the internet at my home. I needed to implement the network as follows, however my efforts have managed to bring down ...
1
vote
1answer
669 views

How to connect 2 home routers to connect 2 separate networks?

I don't know if it's a silly question, but I'm not very good at networking. So please help me out. I have a Netgear WNDR4500, and I configured my PCs and virtual machines setting the WNDR4500 (192....
1
vote
1answer
277 views

how to force an illegal netmask in ubuntu

I want to force a netmask on my Ubuntu machine. For example, I want 11.0.0.1 to get a netmask of 255.255.255.0 I tried editing /etc/network/interfaces and I forced the desired netmask, but as soon as ...
0
votes
1answer
24 views

subneting a small store

I have a friend with this small store/cyber and want to divide the network like this clients can only see other clients registers can see other registers admins can see everyone I currently have a ...
0
votes
1answer
44 views

Access subnetwork by networks IP

I have a router in my house which has some IPs assigned. By default the router creates a sub-network. Can I access a device in my sub-network (IP example: 192.168.1.3) from outside that sub-network ...
0
votes
1answer
28 views

How route two subnets when they are connect to a same router?

I have a Router has 4 ethernet ports, eth0 to eth3, with OpenWRT inside and such configurations: Interface lan1 involves only eth0, IP address 10.10.0.1/16 Interface lan2 involves only eth1, IP ...
0
votes
1answer
34 views

Guest Network and NAS

I am trying to setup a network where I can achieve several things. I might be overthinking this, but here is how I envision it working: I am willing to use 2 or 3 routers I want a network or subnet ...
0
votes
1answer
362 views

Two subnets: devices see others from the other subnet

I have two subnets x.x.10.0 and x.x.20.0 running under mikrotik router so RouterOs GUI, I have set two dhcp on ether2 and on ether3 interfaces a made address pools x.x.10.2 - 254 and x.x.20.2 - 254. I ...
0
votes
1answer
57 views

Make Linux Notebook Act Like a Network Hub

I've been looking for a solution for this quite a while and I think that I am exactly as clueless as before. So I figured why not ask people who really know about this stuff... I'm trying to connect ...
0
votes
1answer
2k views

IPV6 at home: my ISP delegates me a static IPV6 /56 subnet, how can I set up an IP scheme & DHCP6 for my network?

My network looks like this: (Cable Modem/Router) <-> (PfSense Router) <-> (Internal Hosts) The IP (changed for security) of my cable modem is: IPv6 Address 2001:1:a481:300:6eb0:ceff:...
0
votes
1answer
66 views

Using DNS to forward to a specific local address and port?

Im running a server on a local address, a raspberry pi at x.x.x.111:64738. I own a domain, mydomain.nu. I want to create a subdomain (the hosting provides a cPanel interface) and forward it to my ...
0
votes
1answer
1k views

unable to ping my win7 computer from an another computer in different subnet while I could do the opposite

subnet A(192.168.137.0/24) has P(192.168.137.1) and Q(192.168.137.2) computers subnet B(192.168.7.0/24) has Q(192.168.7.1) and R(192.168.7.2) computers P is my windows 7 computer connected to ...
0
votes
1answer
253 views

How do I create subnets given these constraints?

I am trying to tackle the following subnetting problem: Prepare subnetting for an organization that requires 2000 hosts to be placed on the network. The maximum number of hosts on a subnetwork is 300. ...
0
votes
1answer
100 views

How to calculate subnet of your interface based on the destination IP and subnet?

I am new to networking and linux so I am not able to fix this problem. I have a power controller connected to my linux PC (eth0) through a switch with the default static IP of 192.168.1.100 and subnet ...
0
votes
1answer
2k views

Can't ping to computer but reverse ping can

So Computer 1 can ping to computer 2 but reverse it can't Setup: Router A (192.168.0.xxx) 255.255.255.0 > Router B (192.168.1.xxx) 255.255.255.0 So computer1 on Router B can ping to computer2 on ...
0
votes
1answer
1k views

OpenWrt router acting just as a switch with another WAN from wifi client

I have here this networking problem I can't figure out. My situation is following: ADSL cable connection to WAN, provider's router/modem (some Zyxel), DHCP running, original firmware, not possible ...
0
votes
1answer
75 views

Remote network administration, solving 2 device 2 subnet merge

The problem: 1.) No Physical Access 2.) Very basic on site help 3.) Combining 2 subnets on 2 routers Now we know i cant go on site to move cords around so here are the current cord ...
0
votes
1answer
236 views

How to force to send data to router (on L3) instead sending directly? (on L2)

I have a public IP-addr on one machine: a.b.c.156/32 The GW is a.b.c.133 (which is in the /27 network with its gateway a.b.c.129) I statically added an arp route: sudo arp -an a.b.c.133 at ab:cd:...
0
votes
1answer
40 views

Emulate Network address in a LAN

My college has a network, their dhcp will allot us a xx.xx.67.xx ip (Wifi), i found that in their lab they use a different proxy that is restricted for our ip range(Squid) (xx.xx.1.xx is their ip ...
0
votes
1answer
296 views

Is there a benefit of setting up VLANs if my subnets are wired separately?

I have 2 subnets within my office: 172.16.1.0/24 and 172.16.2.0/24. All devices on each subnet are wired independently from each other into the server closet. Previously each subnet had it's own ...
0
votes
1answer
769 views

How can i connect 2 PC with different subnets in 1 Switch in 1 Router

Well here is the problem...I want to connect 2 PC pc_1: 10.1.1.18/29 pc_2: 10.1.1.66/29 with 1 switch pc_1 -> Switch Fa0/1 pc_2 -> Switch Fa0/2 and this switch to a router ...
0
votes
1answer
53 views

What aids exist in RHEL v6 to calculate subnets without an internet connection?

The Red Hat version of the ipcalc program is very basic compared with some other versions that are available. Suppose you didn't have an internet connection and could only use tools that exist ...
2
votes
0answers
2k views

Accessing a wireless router on a different subnet

Okay, I'll try to describe how this network is set up. I didn't do it personally, but it has been described to me. Firstly, we get our internet from a 3G wireless USB card from ATT. This means that ...
1
vote
0answers
14 views

VPN access but can't Remote Desktop after changing subnet

I have VPN access setup through my Meraki MX100 firewall, and can VPN no problem. Remote Desktop was working perfectly fine on the VPN but a couple of days ago just stopped working. I get the usual ...
1
vote
0answers
137 views

2 APs over Powerline Network within same IP subnet cannot see eachother?

I am having issues setting up my home network using powerline adapters. My Setup I have a Gateway, a Router, 3 Powerline ethernet adapters, and a Powerline Wifi Unit (TP-Link TLWPA4220). All of the ...
1
vote
0answers
2k views

How to setup two-way routing with Tomato Wireless Client mode (different subnets)

Currently I have a Netgear R7000 as my main router, with internet coming from a Moto Surfboard SB6141 Cable Modem. I have a Linksys E3000 running Toastman TomatoUSB connected to the R7000 as a ...
1
vote
0answers
927 views

Why can't I change the subnet IP address in the Virtual Network Editor in VMware Workstation?

In the Virtual Network Editor in VMware Workstation (version 9.0.0 build-812388), I want to change the subnet IP address or one of my host-only virtual networks from 192.168.203.0 to 192.168.124.0 (...
1
vote
0answers
467 views

Shared Folders - Network Resource not Available

We have five computers (example "COMP1", "COMP2", etc.) at a remote site hooked-up to our domain. Each computer has a shared folder which gives full permissions to the local administrators group. To ...
1
vote
0answers
76 views

Mixed use network access restriction

networking dummy here. I have a mixed business-home environment and would like to create a secure environment with controlled access. Here is a basic layout: http://i.stack.imgur.com/2lVGv.png The ...
0
votes
0answers
28 views

Using HTTPS over HTTP for requests between servers in a subnet AWS?

Are there any reasons to use HTTPS instead of HTTP for requests between my servers running in a private subnet on AWS? All requests going in/out of the subnet will done via HTTPS to prevent sniffing. ...
0
votes
0answers
24 views

Understanding subnet mask on Ubuntu 14.04

Currently my broadband ISP connection is down. I accidentally altered my subnet mask id on Network Manager. When I entered the original value again it does not save it. Instead it saves 192.0.0.0. ...
0
votes
0answers
22 views

We're having our receipt printer provide a very unusual subnet mask. Has anyone experienced anything like this before?

Thanks in advance to anyone who can help me out with this. We're using a custom receipt printer which was bricked in DHCP for quite a while. Every method we used to change this gave no result. We've ...
0
votes
0answers
21 views

Is there any way to route between more than 2 subnets on a single (home-spec) router?

I'm not a typical network admin, it's all new to me. But I've done my homework, and I'm expecting the answer to be a flat "no", but I decided to ask anyway - just in case I'm missing something. Just ...
0
votes
0answers
24 views

IP overlap with cisco packet tracer simulation

PC 1 Network IP fa1/0: 192.168.1.7 /27 IP range: 192.168.1.0-31 Subnet Mask: 255.255.255.224 Router - When I type in the router IP fa1/0: 192.168.1.7 255.255.255.224 I keep getting error saying that ...
0
votes
0answers
14 views

MS Routing Server not routing from Hyper-V External Adapter

I've searched this issue but i'm not able to resolv it. I'm not able to route to a subnet! Here is a high level overview of my env: Network Overview What does work: From the MS Routing Server: ...
0
votes
0answers
31 views

How to access a pc on local network from main network

We are in college and every room of two people has only one lan port. We belong to a college subnet: 172.31.80.218/26 Now I am connected to our lan port and have the above IP. I create a wifi hotspot ...
0
votes
0answers
17 views

Linking Subnets Over DDWRT Wireless Client

This ones had me going for a few days. I have a Uverse supplied Motorola NVG589 that supplies our TV, phone, and wireless internet. In my room I have some networking gear which include an ASUS RT-...
0
votes
0answers
20 views

Route all WAN traffic from a subnet through a separate ISP-connected subnet

I have 2 routers that I will call, HOME_ROUTER and WORK_ROUTER. HOME_ROUTER is for home use and is connected to my ISP and WORK_ROUTER is for work use and is connected to noisy video encoders and ...
0
votes
0answers
36 views

Cascading Cisco RV180 and Linksys E2000

I am trying to cascade 2 routers in my home network. I have an Actiontec DSL modem connected to the WAN port of my Cisco RV180. I am trying to connect a second router, a Linksys E2000, to my ...
0
votes
0answers
38 views

I FUBAR'd the IP, subnet, and VLAN settings. Now how to access managed switch?

I have a Dell powerconnect 2748. I think I have done messed it up though when setting it up because so far I have not been able to access the webconfig of the switch after I changed some settings I ...
0
votes
0answers
110 views

Ubuntu ethernet connection and wireless access point on the same subnet

I am running Ubuntu 14.04. I have a usb wifi adapter that has AP according to iw list. Currently my ethernet (eth1) connection's address is 192.168.1.108, and my wireless (wlan0) access point's ...
0
votes
0answers
41 views

How to tell if a dedicated subnet is available to a Linux server?

I'm trying to install Kubernetes and am reading an article about it that states: One key assumption that Kubernetes makes is that a dedicated subnet is available to each minion server. So I ask: ...
0
votes
0answers
9 views

Bigger RRAS Subnet

Will RRAS work with a bigger subnet mask of 255.255.0.0? Basically I need to create multiple scopes for different groups of users, for example 192.168.2.0, 192.168.3.0 and so on. But I want only 1 ...
0
votes
0answers
58 views

Accessing ISP subnet resources?

This is my first question here so I don't know if I would supply all the relevant and required information. The situation: I have IPTV and Internet from the same provider. I managed to get the links ...
0
votes
0answers
311 views

virtualbox pinging from one subnet to another

I'm using virtualbox and I have 3 virtual machines, there's the middle vm which is a Linux Fedora 20 which has two interfaces connecting each to one subnet, the other two vms is one also a Fedora 20 ...
0
votes
0answers
193 views

Arch Linux device with static IP address, new router not finding the device

I have a device running Arch Linux on my network (Raspberry Pi to be exact) and I do not have a cable for the display. I typically used it by ssh client and had it configured for a static IP address ...
0
votes
0answers
2k views

Windows 7 can ping but can't see device on other subnet

I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 ...