0
votes
0answers
15 views

not all packets forwarded by pptp VPN server

I have the following setup: +------+ +---------+ ppp0---------+ |router| | A +-----+---+-----+ B | | R | ...
0
votes
1answer
29 views

ipsec configuration problems on Ubuntu. Errors on IP forwarding" connection authorization from Android client

I'm trying to create a L2TP/IPSec PSK VPN from my Android phone to my Ubuntu server on my home network. I am receiving two errors. the first one is a failure checking IP forwarding when I run ipsec ...
0
votes
1answer
49 views

Need assistance SECURELY accessing home network from Android device

First I am able to use simple port forwarding on my router to access each IP cam individually. This is an unsecure method and is exactly the solution I a trying to get away from. I am a Linux ...
0
votes
1answer
42 views

PPTP server not functioning (or set up) correctly

I've set up a PPTP server on Ubuntu Sever 14.04. I need to allow a foreign client to access the LAN, but NOT attempt to use my internet connection. When connecting to the VPN the client loses internet ...
-1
votes
0answers
129 views

League of Legends Open VPN server setup

Just setup my OpenVPN server for the first time to be used while I'm in university halls to play games on their network, I have had no issues with most games so far however League of Legends does not ...
0
votes
0answers
53 views

Openswan won't connect to SonicWall NSA 2400 - Policy does not allow static IP

We have a SonicWALL NSA 2400 firewall, and connect successfully from the office to our datacentre via VPN on Windows machines using the SonicWALL Global VPN Client. We now need to connect an Ubuntu ...
0
votes
0answers
19 views

VPN connection sharing through Windows guest / Share guest VPN with host

Can I route traffic from Linux through the VirtualBox guest's VPN? The guest VPN client should see this traffic as local and therefore would not attempt to block it.
1
vote
1answer
105 views

Ubuntu vs. Windows VPN routing behavior

Both my home and workplace networks are the same (subnet 10.0.0.x). When I configure a VPN connection on my Windows 7 machine (PPTP), I can ping any server that is located at my workplace without any ...
0
votes
4answers
72 views

OpenVPN + unbound DNS: simultaneous usage possible on same machine?

I am trying to run a OpenVPN tun server that listens to port 53 on UDP. I also am running unbound DNS on the same machine to provide DNS and filtering to the VPN and the machine itself. I am unable ...
0
votes
1answer
169 views

ssh over VPN to ubuntu server

I have remote server(ubuntu server). I access remote server by ssh as ssh root@IP_OF_SERVER, then I have setup a webapp running in server and access it by IP_OF_SERVER:80. Every thing is working fine. ...
0
votes
0answers
29 views

Debugging through VPN on a VM

My laptop runs Windows 7. I run various Virtual Machines to encapsulate my VPN connectivity and keep client environments separate as much as is convenient. In this case, the virtual machine is Ubuntu ...
1
vote
0answers
147 views

How to bring up the ppp0 interface?

I am trying to start my pptpd server on Ubuntu 12.04 on my laptop and I was following the instructions at this page and Ubuntu's official guide. I am doing this because I wanted to setup a VPN server ...
0
votes
1answer
430 views

Can't Connect to PPTP VPN When Using NETGEAR N300 Router

I'm running Ubuntu 14.04, and I'm able to connect to the VPN on other networks, just not the one in my house. I'm pretty sure that my router is blocking the connection. How can I fix this? Output ...
0
votes
0answers
25 views

How do I, on a Ubuntu Server acting as a NAT, forward all requests for a subnet to a VPN?

I have an Ubuntu server handing out IP addresses in the 10.1.2.x range acting as a NAT. It is connected to a VPN, and has the IP address 172.16.1.250 from it. How do I have it forward any requests ...
1
vote
1answer
98 views

Ubuntu + CISCO VPNC CLIENT for my new ubuntu version (32 bit )

I have newest Ubuntu Linux version 10.04.4 (32 bit ) I want to install Cisco VPNC client on this linux machines in order to connect to other customers I little confuse , which VPNC cisco version ...
0
votes
0answers
23 views

Allow PPTPD Clients to Communicate

Ive set up a PPTPD VPN server on an Ubuntu 12.04 Machine. I have 3 machines connected to it, 2 of which are on the same network and one that is on a separate network. All 3 are on the VPN, and can ...
0
votes
1answer
32 views

Client config for private openvpn server

I installed openvpn server on a local Ubuntu server at home. I want to use this to connect to in situations where I have to use public wifi. The server setup is done. I followed the Ubuntu guide, and ...
0
votes
1answer
55 views

Connected to vpn but can't connect to internet

I am using ubuntu 12.10 as a vps. And I am trying to configure a vps server on it. I can connect to the vpn but just can't get internet access. Maybe because I don't know how to write a iptables. ...
1
vote
1answer
526 views

How to configure pptp vpn client on ubuntu server to route specific traffic?

I installed and ran successfully a pptp vpn client on a ubuntu server (aws ec2). I want to be able access certain websites through this vpn. However, still able to ssh and connect to server. $ route ...
0
votes
0answers
33 views

Forward the PPTP VPN connection to mobile

I have an Internet connection shared from my Ubuntu to my android phone, And it's work fine, but it's stop from mobile when i run the VPN (VpnBook), I think i have to configure some proxy setting in ...
-1
votes
1answer
75 views

Sample (working) configuration for openvpn in AWS

I've been trying to set up openvpn on AWS EC2 instance and I'm having lots of trouble with that... I followed the guide on ubuntu help center but it either blocks all connections or doesn't work ...
0
votes
1answer
208 views

Solution for automatic VPN-Connection on Ubuntu 13.10

I am searching since ages for a solution to connect to VPN-Servers automatically in my Ubuntu 13.10. It should connect on startup and reconnect on connection-drop. I tried several things: ...
0
votes
1answer
2k views

Multiple OpenVPN connections from one client to one server - connection reset

I have a Ubuntu 13.10 OpenVPN client, and Windows XP OpenVPN server. Connection is established, everything works fine (actually Im testing it on two virtual machines). My question is simple: can I ...
1
vote
1answer
167 views

OpenVPN on Ubuntu Linux, connection established, how to send data through vpn?

I installed OpenVPN on my Ubuntu machines (both client and server are Ubuntu machines). Its a fresh Ubuntu installation (13.10). I wrote some config files, for client and server: server.conf: (my ...
0
votes
1answer
109 views

Traffic is not routed through VPN when PPPoE is Used

I have internet through PPPoE but the traffic is not routed through VPN. i use ubuntu 12.04. Usually when i connect to a wireless internet adapter, there is no problem. But now I have to connect to ...
0
votes
1answer
287 views

Unable to connect to L2TP VPN

I've been trying to set up a L2TP/IPSec server on my Ubuntu install using this guide. While trying to connect I ran sudo tail -f /var/log/auth.log, the output of which is below: Feb 8 10:35:41 ...
1
vote
2answers
557 views

OpenVPN - Connects but no internet on Linux, works perfectly on Windows

I have set up an Amazon EC2 server with OpenVPN configured. I can connect using a windows machine and everything works as expected - internet traffic is all routed through the VPN. With the Ubuntu ...
0
votes
1answer
790 views

How to configure ufw-firewall for OpenVPN

I am running a VPN via IPredator on Ubuntu 12.04 Desktop, which works perfectly, when ufw is disabled. When I enable ufw, I logically cannot establish a connection. IPredator states that I have to ...
0
votes
1answer
219 views

Ubuntu+NetworkManager+openvpn - completely replace /etc/resolv.conf with openvpn pushed DNS servers?

I am running Ubuntu 12.04 LTS but have configured NetworkManager to NOT use its built in dnsmasq for DNS resolution (by commenting out dns=dnsmasq in /etc/NetworkManager/NetworkManager.conf) as ...
2
votes
0answers
61 views

Run VPN (openconnect) on VPS without breaking SSH

I have a VPS server and I want to connect it to a CiscoVPN with openconnect, so traffic from the VPS passes over the VPN, but I also want to be able to use SSH. Right now when I start openconnect the ...
0
votes
0answers
436 views

Strongswan configuration for the android strongswan client

I'm now configuring strongswan server and want to test using strongswan android client. I configured ipsec.conf, strongswan.conf and ipsec.secrets as follows and I could not login from the android ...
1
vote
1answer
113 views

excluding port from VPN client

I use hidemyass which is a vpn service. I use it for privacy reasons. The main purpose of the VPN is for my web browsing. How can I exclude certain ports from using the VPN connection? For example: ...
0
votes
1answer
310 views

How do I route all traffic through my openconnect VPN?

By default, my company's AnyConnect VPN (Which I'm connecting to on ubuntu with openconnect) only tunnels traffic to certain corporate sites. Unfortunately, I'm currently in China and the Great ...
0
votes
2answers
205 views

Use VPN for only one RDP connection in Ubuntu

I'm not an expert in networking stuff. I have a CISCO VPN connection set up, to connect my computer at my work, using a VPN connection, and Remmina. This works fine, but all my internet traffic goes ...
0
votes
0answers
433 views

PPTP VPN connection terminated Ubuntu 13.10

In Ubuntu 13.04 and now in Ubuntu 13.10 I have an issue with VPN. When I turn on VPN, then is connected. When I ping server on VPN, ping is working, but when I open webpage on VPN than connection is ...
0
votes
1answer
322 views

VPN PPTP connection for ubuntu server

Not sure if I should be creating a new post or replying to a very old post. But this is the guide that I followed. Failure to connect to PPTP VPN in Ubuntu: VPN plugin failed: 1 I'm using ubuntu ...
0
votes
1answer
162 views

Prevent resolve.conf from being overriden

I have problems with my VPN setup. I have the Cisco AnyConnect client installed, as well as the openconnect network plugin for the network-manager. Both have a fundamental problem: Cisco's ...
0
votes
0answers
67 views

cannot view remote desktop using vino if VNC, SSH protocols are used

I can view my remote desktop through Remote Desktop viewer(vinagra) using RDP protocol. But I cannot see the whole desktop but only a part of it. Also if I start vinagra using SSH/VPN protocol,it just ...
0
votes
3answers
1k views

How can I hide the IP address associated with my domain name?

I run a self hosted Wordpress blog off of my home headless Ubuntu Server 12.04. What is the best solution for hiding my IP address number from showing up if someone where to type my domain name into ...
0
votes
2answers
311 views

Choose source interface for PPTP VPN on Ubuntu

I have an Ubuntu Virtualbox guest with two network interface, eth0 (NAT) and eth1 (bridged). I want to connect to a PPTP VPN using eth1, but I don't know how to specify which interface to use. If i ...
3
votes
0answers
373 views

Setting up VPN client: L2TP with IPsec

I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to ...
0
votes
0answers
160 views

OpenVPN: failed to resume on wake up

I've installed an OpenVPN daemon on my Ubuntu 13.04 computer, I'm forwarding all my traffic through a personal server. Everything works fine, I've also installed it with success on several other ...
0
votes
1answer
177 views

Disconnected from Shrewsoft VPN and now I have no internet access (Ubuntu 13.04)

I use Shrewsoft to connect to my work VPN. Now, when I disconnect, it is as if when the tunnel is shut down there are some remaining network settings which are prevent me connecting to the internet ...
0
votes
1answer
382 views

Ubuntu openVPN TCP no internet, UDP works. Win7 works on both TCP/UDP with same settings

I've recently purchased a VPN service which I'm connecting to with openVPN. On Windows 7 I can connect on both UDP and TCP settings, but when I'm trying the same thing on Ubuntu 13.04, it gives me ...
0
votes
0answers
263 views

Openswan VPN Server No default gateway on client

I have a NAT'd Openswan Server running on my Ubuntu machine (192.168.0.13). I can connect with my Android and Win7 machine local and remote. I can surf my own LAN but cannot access the internet. On ...
0
votes
0answers
155 views

How to create permanent VPN connection from terminal only [ubuntu 13.04]

I am attempting to create a live CD for myself that includes a VPN connection to a paid service. All the instructions that I see for creating VPN connections in Ubuntu leverage the UI. However, I ...
0
votes
0answers
94 views

OpenSSH over VPN (unable to bring up tun0)

I have a nerwork(10.1.2.0/24) where i connected OpenSSH server and OpenSSH client via a switch. I am following this guide: http://bodhizazen.net/Tutorials/VPN-Over-SSH/ I can successfully ssh to ...
2
votes
1answer
2k views

Find the IPsec ID and Secret id for my vpn connection

Hi i'm using ubuntu and new to cisco vpn anyconnect client. I have installed it successfully and establish the connection by giving the user name and password. But it is showing the timeout error. So ...
2
votes
0answers
230 views

Setup Ubuntu L2TP VPN server and authenticate users with certificates

I am trying to setup an L2TP server on my Ubuntu VPS and use certificates to authenticate users rather than a password. The reason behind this choice is that I don't want to have plain text passwords ...
2
votes
1answer
422 views

Linux alternative to route add on windows

When I'm connected to my windows dedicated server and connect to a vpn server I would get disconnected from the dedicated server since its ip address would change. I found a way to overcome this by ...