Questions tagged [wan]
WAN or Wide Area Network is one that spans more than one geographical area, usually across city, regional or national boundaries. The Internet is an example of a WAN.
243
questions
0
votes
1
answer
29
views
Zyxel NR5101 - WAN direction?
I'm looking at Zyxel NR5101 product specifications where it says:
Two 10/100/1000 Mbps Ethernet RJ-45 LAN ports, LAN1 can be configured for Ethernet WAN port
I'm used to having Asus routers where I ...
0
votes
1
answer
58
views
8P8C non standard connector?
A short backstory to clarify the issue.
Not long ago I bought a used home router from CISCO, model EA6300V1 to increase the speed of my local network up to 1 Gbps.
The local network works fine after I ...
0
votes
1
answer
757
views
Connecting PC ethernet port to WAN port of router
I would like to perform nmap scanning on the WAN port of my router from my PC by connecting the ethernet port of the PC directly to the WAN port of the router. How can I assign an IP address to the ...
0
votes
0
answers
38
views
Setting up a firewall to be in front of my devices using public IP
I'm currently using USG FLEX 500 firewall device from Zyxel.
It has 6 unused ports.
I have 7 PCs each with public IP address assigned to it. I would like to set the firewall up in a way that when ...
-1
votes
2
answers
297
views
How to setup two interfaces on one NAS to isolate WAN and maximize LAN traffic speed?
How should I setup my NAS network settings to isolate WAN and LAN traffic on each physical interfaces (1 and 2) to maximize LAN traffic speed? Or does another option exist to achieve this result ...
0
votes
0
answers
60
views
Starlink and Mobile 4G: Route Google Meet over 4G
I have a Starlink satellite broadband WAN connection and a 4G mobile internet WAN connection.
Starlink is great for streaming and general internet but it drops out for a few seconds every hour due to ...
1
vote
1
answer
1k
views
Connecting LAN of first router to WAN of second router not working
So I have 2 routers
(first provided by the ISP: Speedport smart 3)
(second is my personal: Tp-link Archer AX23 AX1800)
And what I want is to connect my second router to the router provided by my ...
1
vote
1
answer
498
views
Cannot ssh anymore via no-ip hostname, works with wan ip, nslookup gives nxdomain
After extensive search of this forum to no avail, I post my issue here.
I have a small machine running pop!OS 22.04 at home that I use to host a few pages with nginx.
To do so, I have a no-ip domain (...
0
votes
0
answers
186
views
Determine LAN and WAN IP address
Is there a simple way to determine the LAN and WAN IP address of a connected device?
I frequently need to check the local and external IP addresses of devices, especially mobile devices, but I tend to ...
1
vote
1
answer
547
views
Connect my ftp server, filezilla client works well, why ftp command line fails?
I'm trying to build up Excel VBA programmatically and expect it could download some files from the server via the FTP command line. The server which I set up at my home local network(experimental ...
0
votes
1
answer
161
views
What would cause network traffic to spike in evenly distributed spurts?
This happens periodically, and I am looking into ways to monitor network traffic more closely, but it looks like my WAN2 (in) traffic bounces in almost perfect intervals, and at the same peak usage. ...
0
votes
1
answer
45
views
Connecting to ISP Modem/Router interface from secondary router connected through WAN to the first one
I have the following network, see picture
Network topology
What I want is to access the admin interface of router A from computer 1.
What should I read about, or what should I do?
1
vote
1
answer
330
views
Port forwarding safely or WAN port alternative?
I am trying to host a small server on my home network and I am trying to come up with a convincing solution, security-wise.
First of all, my router has a DSL connection to the ISP, but it also has a ...
0
votes
1
answer
6k
views
Finding the MAC address of my router's WAN interface
As I understand, a router has at least two network interfaces: LAN and WAN. The IP address of the LAN interface is private, and the IP address of the WAN interface is public.
Is the IP address of the ...
0
votes
1
answer
417
views
Wake-On-Lan (WoL) not turning my pc on when used through WAN from a full shutdown (Wake-On-Wan)
My pc won't turn on from a full shutdown when trying over WAN, but the protocol works when trying to wake the pc from sleep-mode over WAN and when trying to turn it on from a full shutdown over LAN. ...
2
votes
1
answer
1k
views
How to monitor two internet connections to detect outages and switch to the active one when one is down
I have two different internet connections on my house (from two different ISPs). And I use a TP-Link ER605 Multi-Wan router to manage both connections and deliver a single internet connection to my ...
0
votes
0
answers
35
views
Limiting traffic to/from VM
I have a headless Ubuntu VM running on an Ubuntu host. I want to limit the VM's WAN traffic to a specific IP address range only (e.g., 156...), and if servers on that specific IP address range are ...
0
votes
0
answers
238
views
Connect two networks by WAN port, not vpn
I got a job in a big company as IT manager.
Because some problems in the past they had, I want to separate each sector with a different network.
But I want to each computer from specific network see ...
1
vote
1
answer
78
views
Can you connect 2 networks from 2 different providers to 1 motherboard?
I was unhappy with the reliability of the broadband offered by my mobile service provider, but they've made it so there isn't a TV plan I'm happy with w/o broadband, so I'm still connected to them.
I ...
0
votes
2
answers
178
views
What is my subnet and gateway [closed]
When I connect my iPad to my Mac using personal hotspot, do I form a LAN? If yes, then what should be my subnet and what acts as my gateway?
1
vote
0
answers
61
views
How to connect two routers? — WAN
I am trying to set up a single network consisting of two routers and their attached nodes over the internet between two cities, SanDiego and Chicago. Where anything attached to each router is visible ...
0
votes
0
answers
24
views
Using macbook to connect to home desktop
I recently bought a macbook for university, as I am working on a laravel project I would like to leave my computer at home running the project and be able connect to it and to work on it at school ...
0
votes
1
answer
5k
views
Router: use LAN port as WAN port
Initially asked at https://networkengineering.stackexchange.com/questions/75891/router-use-lan-port-as-wan-port but was sent to Super User. There with screenshots. Here don't have 10 reputation — can'...
2
votes
1
answer
5k
views
Could I connect WAN (router 1) to WAN (router 2)? Is it possible?
WAN to WAN (router 1 to router 2) - is it possible and what will be the behavior in theory?
For example I will describe:
LAN to LAN (from router 1 primary with DCHP 192.168.1.0/24 and WAN connected ...
0
votes
0
answers
481
views
How to access private IP addresses with WAN running on 5GHz band of router
I have an access question regarding my special setup. Hoping you can help as I've reached the end of my networking knowledge and am going in circles now. Here's the background to my setup -
I am piggy-...
0
votes
0
answers
59
views
Log uptime/downtime, win10
I'm currently having a issue with my WAN, my LAN never goes down but my WAN seems to lose connection every 30minutes (roughly). I'm wondering if there is a way to log the times automatically like ...
1
vote
0
answers
104
views
Trying to PenTest my client's local network but their Public IP is the same as other people in the area
I posted something similar before and it was just Closed due to clarity. So I've updated it and added clarity and changed the title.
I had posted on Stack's Network Engineering but apparently I was ...
1
vote
1
answer
2k
views
How to access LAN of another router connected via WAN port?
I have 2 routers connected via WAN-LAN. Base router that have internet connectivity and another is used to extend network. Both networks are working fine. For some reasons I need to access few devices ...
2
votes
0
answers
309
views
Load balancer at home with 2 ISP
I have 2 floor house and 2 ISPs. One is via wireless and the secondary is LTE. One router can only go on the first floor, as the Wifi connection antenna end is placed there, and second (LTE) can be ...
1
vote
1
answer
397
views
Trouble Connecting a 5G CPE Modem/Router to my DD-WRT Router (LAN to WAN with DMZ)
I am having some trouble connecting my ISP Provided 5G CPE to my DD-WRT router.
My ISP Provided 5G CPE has no option to be Modem only mode. (Spoke with ISP, they will not enable Modem only mode...its ...
0
votes
1
answer
1k
views
How do I connect my NAS to separate LAN's
*** I use SYNOLOGY DS918+ - HAS 2 ETHERNET PORTS IN THE BACK ***
Hi, I have two LANS 192.168.1.1/24 & 192.168.2.1/24 - In DS918+ there are two LAN ports and I connected them to these 2 LANS.
Under ...
1
vote
2
answers
383
views
LTE connection for Desktop
I have been searching in Internet about how to connect to a LTE connection. I want to use cellular LTE internet in my desktop. There is no WWAN card for desktop also. So my question is how to use LTE ...
0
votes
0
answers
219
views
Does this dual-WAN setup seem sensible? NBN + 5G failover
I have an HFC internet connection, which takes the form of an ISP-managed Network Termination Device (you can't even log into it, you just have to stare sadly at the status lights) hooked up to a ...
1
vote
1
answer
423
views
Multiple different IPv6 WAN addresses same time
this is my first post, so be gentle with me for sometimes not using the correct terminology.
I am using a Fibre ISP with CG-NAT (DS-Lite). I connect via IPv6 Prefix Delegation with a /56 address space....
0
votes
0
answers
941
views
Can't Ping from LAN to WAN and port forwarding is KO
hope you can help me out.
I have a modem (192.168.1.1) and a router (Xiaomi AX3600) connected to it via cable (192.168.1.2) which is creating a WAN (192.168.31.1).
All devices are connected to Xiaomi ...
-1
votes
1
answer
540
views
How to capture packets at the "DSL side"? [closed]
https://osqa-ask.wireshark.org/questions/23522/capture-packets-from-my-broadband-modem
It is written here that capturing packets passing through the modem at DSL level, would only be possible with ...
0
votes
0
answers
211
views
Second router not sensing internet while PC connected with the same cable does
Because I have my main router (from my internet provider ) in the corner of the house, WiFi doesn't reach my room (thick walls). I connected my PC with a UTP cable about 25-30 meters long. Now, a few ...
0
votes
1
answer
606
views
How to use my TP-Link for internet and my ISP's router just for VoIP
I've just upgraded from ADSL to VDSL, at the same ISP, and with that they sent me a new modem/router and they also switched my telephone line from POTS to VoIP.
I do not wish to use their modem/router ...
2
votes
0
answers
84
views
Forwarding WAN traffic coming in to VPN Server to VPN client and then to device on client LAN
Here's a synopsis of what I'm trying to accomplish. My Internet connection is double NAT'd and I have no ability to port forward or bridge the upstream router so that my router can accept incoming ...
0
votes
1
answer
155
views
Sync huge file tree with rsyncd, and encryption
I need to do daily copy of large file tree over the public internet, and do that effectively. As far as I know, if I use rsyncd on receive part then sync is done quite effectively since during file ...
1
vote
0
answers
70
views
Metrics configuration for 2 networks: WAN & 4G on Windows 10
I am currently in charge of designing a network solution. I am fairly basic at networking but im sure this solution should work.
On our previous development, we had thought that our machine would only ...
2
votes
1
answer
274
views
configuring a L2 transparent wireless bridge on WAN side of router
I'm configuring a Layer 2 wireless bridge and found that my router (ASUS RT-N66U) is unable to create VLANs on WAN for managing the bridge radios from within the LAN. In case that's unclear, the ...
0
votes
1
answer
2k
views
Router configuration: Can i configure the WAN port of my router to static ip, at the same time LAN port to static in different local network?
Can i change my WAN port IP to be static IP in my local network? LAN IP is already static and it is in a different local network. For example:
WAN IP: 192.168.250.2 / 255.255.255.0
LAN IP: 192.168.1....
0
votes
0
answers
220
views
How do I create a LAN connection between computers on internet
I want to play games with local server like amongus on bluestacks. I have tried making a VPN from control panel and forwarded the ports, but when my friends connect to the internet, their internet no ...
0
votes
0
answers
40
views
Different WAN speeds from different computers on same 1Gbit LAN
I have 3 computers on same LAN connected to WAN over a switch.
Two of them have 40Mbit/s/3Mbit/s download/upload speed and 3rd has 3mbit/3mbit download and upload speed according to (speedtest.net)
I ...
-1
votes
2
answers
267
views
Connecting a router
I am trying to set up a new Tenda wifi router, but am having trouble. I am getting the following message:
Does anyone know what this means? Also do I really need to set up the router if I'm already ...
0
votes
0
answers
807
views
How to intercept web traffic of a remote computer connected to WAN
I'm able to configure burp proxy to intercept web traffic on my local Network but I don't know how to do the same with a pc not connected to my local Network but to internet (WAN).
How can I configure ...
0
votes
2
answers
4k
views
Unable to tunnel port using SSH and localhost.run on Kali Linux
I've got this problem that whenever I try to tunnel a Port using ssh and localhost.run using:-
ssh -R 80:localhost:8080 ssh.localhost.run
I get this:-
** your connection id is 95c80293-xxxx-4c49-...
0
votes
0
answers
2k
views
Possibly broken WAN port: how to verify and how to work around?
Is it possible to say for sure if the WAN port is dead? The green LED blinking is inconsistent and happens while connection and some time after, for me it looks like working.
The context: when I ...
0
votes
1
answer
1k
views
Accessing modem FTP Server with WAN IP
I have configured the FTP server on my router. The FTP server IP address is 192.168.1.1 (same as routers IP address). I port forwarded Port-Forward setup image. Locally FTP server works like charm ...