Hot answers tagged

14

In Photoshop, Files -> Scripts -> Image Processor. Enter 500 for both Width and Height and check Resize to Fit. It will maintain the correct aspect ratio and resize the longest dimension to 500.


8

A4 is precisely 210mm x 297mm. Your calculation in the metric system is correct. The 1 pixel difference is likely due to improper rounding, and anyhow it's less than 0.02% of the width. A more precise determination of the A4 size in inches is: 8.2677 in x 11.6929, which would make the numbers match.


6

1366×768 8-bit pixels is just above 1MiB (by 512 bytes), so it does not fit into an 8Mbit memory chip. 1360 is also divisible with both 8 and 16, enabling simplified and optimized algorithms for processing graphics.


4

The dimension refers to the diameter of the platter within a drive. Obviously, there is no such thing within an SSD, but the size is quoted as the form factor of the casing of the SSD drive is made to match those of traditional drive so that they can be easily used in place of a traditional one. The actual width of the casing of a 2.5" drive is 2.75". The ...


3

There is no "standard" size as it depends on the resolution you wish to print at, so your calculations are correct. Any discrepancy is due to rounding in the calculations where those performing the calculations rounded the intermediate values rather than waiting until the end (as you have done). A one or two pixel difference across 5,000 pixels isn't going ...


3

According to the spec sheet for a Molex PCIe connector, the rise from the mounting surface to the top of the socket is 11.25mm (max.). Feel free to look up other makes/variations to compare, but it should be standard. Even better: buy the board you plan on using, and measure the socket height with a caliper. ;)


2

I finally was able to find the tool I used many moons ago under Win9x: CadStd Lite!


2

Look at file properties (right button over the file, properties), Detail tab, Image section, fields : dimensions (pixels), width(pixels), height(pixels), horizontal resolution(dots per inch) and vertical resolution (dots per inch).


2

Those would be pixels as far as I'm aware. I've never seen them be anything else.


2

I tinkered together a VBA macro. Open your VBA editor with ALT+F11 and paste the below code under sheet1. Execute the macro with ALT+F8 What the macro does Ask user for a path to a picture which he wants to insert (can be jpg, bmp or png) Load that picture as a WIA.imageFile. Later we use objImage.Height and objImage.Width to get the real picture ...


2

The most relevant norm is the RU (rack units). This is respected by all server PSUs. An 2U PSU will never fit physically in the position of a 1U PSU. Weight is not relevant. X x Y are usually 225-230 x 100 while Z is the size RU-related.


1

Will the MasterAir Maker 8 fit on the Gigabyte LG 1151 Micro ATX Motherboard inside of the Cooler Master Elite 110 Micro ATX Case alongside the ASUS GTX 970 Graphic Card? Here are the MasterAir Maker 8 specifications: Here are the ASUS TURBO-GTX970-OC-4GD5 specifications: Here are the `Cooler Master Elite 110 Micro ATX Case specifications: ...


1

There may be several different things going on. First manufacturer specs for screen size are based on a diagonal measurement and may include what is hidden behind the plastic bezel. So that's not a particularly useful measurement for your purposes. If the manufacturer published a 14" spec for the width, that probably represents the nominal dimension of ...


1

This is something Adobe Photoshop Lightroom is MUCH better at. Photoshop will work, as hyperslug explained, but if you plan on doing this a lot in the future you might want to give the free Lightroom trial a spin and see if it saves you some time.


1

This DPChallenge forum thread has a Javascript for CS4. Resize Action in CS3 for portrait OR landscape


1

It's a kludge and very manual but you could use a program like Xscope to determine the size and position and then use it to help you manually position the window for your screencast. The "Can't set bounds of window 1" often means that the window doesn't exist when the script was run. (eg. The window is actually made by a subprocess that gives the actual GUI)...



Only top voted, non community-wiki answers of a minimum length are eligible