Hot answers tagged

4

Windows uses a new Boot since Windows 8 called Fast Startup, which is a logoff + hibernation to shutdown and a resume from hiberation + login at boot. Here all drivers must support the hibernation/resume. you have an incompatible driver which causes the DRIVER_POWER_FAILURE. Here is the Windbg output: 0: kd> !podev ffffe0012a433060 Device object ...


2

When you open the ETL in WPA, click on Profiles->Apply->Browse Catalog and select the file FullBoot.Boot.wpaprofile you see this overview: and see a 58s delay in PreSessionInit/PreSMSS-Phase What Happens in This Subphase The PreSMSS subphase begins when the kernel is invoked. During this subphase, the kernel initializes data structures and ...


2

A device driver is used so the Operating System can communicate with the hardware. It is logical to understand that, in order for the manufacturer to be able to develop the hardware, and to test it, they also have to interface and thus work with the device driver part. Does this automatically mean they will provide the driver? No. Because most hardware use ...


2

Yes, Dell do provide drivers for Windows 7 for this model. You can find the Windows 7 drivers here: 32-bit 64-bit


1

Got it! I'll leave this here for anyone else with this issue. The crux of it was DDU (Display Driver Uninstaller), but these were my exact steps: (Boot into safe mode first) Not sure if this helped or not, but as @Ramhound suggested (also in my edit) I deleted the contents of the AMD and ATI folder in both local and roaming inside %appdata%. I ran AMD's ...


1

You are sheer out of luck. The USB ports on this NUC are strictly USB3 only. There is no way you can run a USB2 device from these ports. It is a hardware issue. Software/drivers can't fix this. (The utility you mention does something else: It modifies a Windows 7 installation image to include the USB3 drivers that are normally not present in Windows 7. ...


1

Try DS4Windows. It contains the drivers you'll need and give you a lot of other options.


1

In windows 10 there is a feature that downloads and shares updates on network from your PC. You can turn it off by doing this. Open settings and click update & security. In Windows update click Advanced options and then click choose how updates are delivered. Turn it off.


1

Memory-mapped PCI(e) devices will have BARs (base address registers) that let the host know how much memory should be allocated for the device. The BIOS (and the OS later) will allocate the requested memory space to the target device -- not that it is a memory address, physical bits are not being allocated. Additionally, this will generally be a physical ...


1

What i made to get lbp-810 working on Windows 10 (32 bit). While restarting your computer, hold left shift (keep it down and and press restart). When your PC starts your get prompted windows. Select troubleshoot...Advanced options..Startup Settings...Press Restart. Now your PC restarts and you get prompted window. Press 7 (Disable driver signature ...



Only top voted, non community-wiki answers of a minimum length are eligible