Tag Info

Hot answers tagged

3

Starting with the known: The image given is 701px × 561px A3 paper size is 16.25" x 11.75" And the bit you may be missing which is that printed output needs a dot density running from around 150 dots per inch up to around 300 dots per inch. Anything much below 180-200 starts to become noticeably grainy, above 300 rarely results in noticeable ...


2

Yup, easily. Go to your Printers folder (depending which way you go, you pick), and choose the option to add a new printer. When it asks what port, choose the existing port, and existing driver. Name it something different though. Once it's created, you can right-click on the printer queue, choose Printer Preferences... and change your settings there. I do ...


1

This may seem obvious, but have you tried any or all of the following? Remove / Re-add printer Re-install / Repair Office 2013


1

As you mention "HP" in your tags: e-mail printing is a functionality of some of the newer (and not so new) HP printers which allow you to bypass having to set up printing for visitors. So instead of having to support visitors who know nothing abouts CUPS, Drivers, USB cables, WiFi/cable networks and such, you just have to stick a label on the printer ...


1

Suggestion for bare Excel: Adjust first column and row width and height to get column two and row two into correct position. Hopefully you can match the row height (of the following lines) to the line height on the form and column width to also match the form in a similar way. If that is not possible, then you might need to continue in the initial style, ...


1

You noted trying each of these settings: Flip on long/short edge Portrait/Landscape However, you didn't mention which combination therein you tried. The reason I mention this is because I'm picturing say for example a calendar; if you're in Landscape & Flip on Long edge; then the normal / expected result would be that the back page is printed ...


1

You can just open it up in MS paint (yeah, it seems odd), print -> page setup and select fit to 2 by 1 pages (adjust the orientation if it ends up odd). Adjust borders and such, and print.


1

In the driver, click on the Advanced Settings tab and untick "Skip blank pages". Note that, to make this permanent, you have to do it from Printing Defaults. Go to Printer Properties, click the Advanced tab, and the Printing Defaults button. Then proceed as above. If you are printing via a server, you need to change the setting on the server, or it will ...



Only top voted, non community-wiki answers of a minimum length are eligible