377 reputation
4621
bio website
location
age
visits member for 4 years, 8 months
seen Jul 16 at 21:57

Mar
4
comment What can cause for an unsuccessful ping on a router?
@DesmondHume I can disclose it, I wasn't sure it it was safe... this person has a static IP address
Mar
4
comment What can cause for an unsuccessful ping on a router?
yes, 110.x.x.x is in the public range, I'm not trying to ping the router from my local network. I'm trying to ping a remote computer. model is DI-5
Jan
27
comment Printer losing image details when printing
the model is hp psc 1310
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
do you know why is it taken up so much memory? I don't think it should do this =(
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
Even after a power-cycle, I noticed the used memory dialog in DD WRT shows that is 95%! I only have 1 computer connected to it and there's no torrent running. Do you think this abnormal?
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
i would say no to those two questions (except the outage indeed happens to all computers on the network), i've added a few more details to the post. ie. I have installed a Linux based firmware dd wrt
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
two win7, one win8
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
that's the only one. You really think that's too many devices?
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
yes, it's well ventilated. and the weather is pretty cold right now. Do you think there's a setting in dd wrt that can reduce some router load?
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
I have considered that my firmware may be out of date. And I was hoping to make my router more robust, so I upgraded to DD WRT, but I have not changed any default settings in DD WRT. As for your point of having too much load on the router, my access to 192.168.1.1 was already sluggish after a power-cycle, no device was connected at that time.
Jan
5
comment Accessing 192.168.1.1 sluggish (occasionally fails) in Linksys WRT54G router
its responsiveness gets slightly better after power cycling, but it goes bad very quickly (I would say after opening about 5 to 6 pages)
Dec
31
comment Linksys router power light off after flashing
IT WORKED!!! Thank you!! I'm not sure why, but earlier I've set the IPv4 address to 192.168.1.100, and it did not seemed to have worked... do you think I've just overlooked it? or it had to be 192.168.1.10 in order for it to work?
Dec
31
comment Linksys router power light off after flashing
@TomWijsman it wouldn't allow me to set my laptop to 192.168.1.1, Windows says another computer on the network has the same IP address.
Dec
31
comment Linksys router power light off after flashing
let us continue this discussion in chat
Dec
31
comment Linksys router power light off after flashing
can you recommend a solution?
Dec
30
comment Linksys router power light off after flashing
@TomWijsman I've updated some details when I look into Network Connection Detail hope that will help...(Note however when I'm not connected to the internet[through another wireless router], troubleshoot is not able to produce the same message Problem Found that "Local Area Connection" doesn't have a valid IP configuration)
Dec
30
comment Linksys router power light off after flashing
@TomWijsman I think you might be on the right track. Although I tried both DHCP and static IP methods, I couldn't ping the router and ipconfig -all didn't show my router. However, I ran a Troubleshoot with Windows, it says Problem Found that "Local Area Connection" doesn't have a valid IP configuration... is this a good hint?
Dec
30
comment Linksys router power light off after flashing
@TomWijsman I got the yellow triangle at the bottom right corner of the Network Icon in Windows. That's been the main problem, even before flashing i get that yellow triangle on the Network Icon. The yellow triangle icon prevents me to access 192.168.1.1. (Before flashing, the first, maybe 3 seconds, after LAN connection[ethernet cable] with the router, there's no yellow triangle, everything was fine, but after about 3 seconds, the triangle appears then I can't ping my router anymore)
Dec
27
comment Computer “loses” connection to wireless router intermittently
what is a wireless adapter? and it can be unplugged? i thought our laptops use a wireless card that's embedded into the motherboard of the laptop.
Dec
24
comment Computer “loses” connection to wireless router intermittently
it's still having the problem.... today i "lost" connection again =(