17

Okay, so I saw this other question which was closed as being too localized and I understand the idea of that closure: Systems, environments and usage are all different.

But my question is about using SSD for minimal write use, archival purposes. Meaning, instead of storing tapes, optical media (BluRay, DVD-R, DVD-RAM, etc…) or even a hard drive somewhere safe, what about SSD which uses NAND flash memory for storage? I assume the act of simply plugging in an SSD, copying data and then tossing the drive in safe/secure archival space disconnected from a system is a solid (no pun intended) way of storing long term data?

I have worked with institutions that routinely archive things on hard disk drives in such a way. But as we all know a hard disk drive is one drop away from being wiped out. SSDs seem inherently much more resilient. This 2014 article in PC World (“Grueling endurance test blows away SSD durability fears”) seems to state that modern SSDs — even those used on a daily basis — will outlast their own self-professed max lifetime.

The reason I am asking this now is SSDs on a very basic consumer level are very cheap nowadays with — for example — 120GB SSDs going for as low as $40, I believe these things would be a good long term storage for things such as archived photos, videos and such… And will only get cheaper as time goes on.

2
  • 1
    Thank you very much for your comment sending me to this question of yours. The answers here are much more helpful. Though I will note that my question is not exactly the same. The drive will be powered up, just that data not copied around unless I do it because it's not an SSD, just a USB flash drive. Though that seems to bring it to be the same as your question, there is still the difference of powering up which might help.
    – ispiro
    Oct 21, 2020 at 16:43
  • 1
    SSD drives have built in logic... - That is also my understanding. And I think USB flash drives lack that.
    – ispiro
    Oct 21, 2020 at 17:29

2 Answers 2

11
+50

SSD technology is rapidly evolving and SSDs have not been around long enough for reliable statistics. I have dug around and found information that indicates that SSD is not reliable as long-term shelf storage, information that I will list below.

According even for my more general knowledge, much of the reliability and speed of SSDs is due to the firmware. The firmware of an SSD does house-cleaning tasks when it is not occupied with requests from the operating system. These tasks include compacting data into blocks, refreshing bits and continuously testing bits and mapping the doubtful ones to spare bits. Actually, heavy-duty SSDs, also called "enterprise", are mostly distinguished only by having a larger number of such spare bits.

These house-cleaning tasks are not possible when the SSD is stocked while disconnected from power.

The Dell article of Solid State Drive (SSD) FAQ (PDF) from 2011 states this :

Q: I have unplugged my SSD drive and put it into storage. How long can I expect the drive to retain my data without needing to plug the drive back in?

A: It depends on the how much the flash has been used (P/E cycle used), type of flash, and storage temperature. In MLC and SLC, this can be as low as 3 months and best case can be more than 10 years. The retention is highly dependent on temperature and workload.

imahe

While SSD technology has much evolved since 2011, the above article is still alarming. I note that it does not say that all the data will lost, but only that some data lose may occur after some days, weeks or months.

A more recent 2016 paper from Google, Flash Reliability in Production: The Expected and the Unexpected (PDF), is summarized in the article SSD reliability in the real world: Google's experience.

Among the conclusions by Google are :

  • High-end SLC drives are no more reliable that MLC drives.
  • Bad news: SSDs fail at a lower rate than disks, but UBER rate is higher (UBER means Unrecoverable Bit Error Rate and is the percentage of bits that have errors relative to the total number of bits that have been read).
  • SSD age, not usage, affects reliability.
  • Bad blocks in new SSDs are common, and drives with a large number of bad blocks are much more likely to lose hundreds of other blocks, most likely due to die or chip failure.
  • 30-80 percent of SSDs develop at least one bad block and 2-7 percent develop at least one bad chip in the first four years of deployment.

The article concludes :

SSD UBER rates are higher than disk rates, which means that backing up SSDs is even more important than it is with disks. The SSD is less likely to fail during its normal life, but more likely to lose data.

Another 2015 article, Hard Drives, SSDs, Flash Drives: How Long Will Your Storage Media Last?, repeats the above data and adds :

Many SSD manufacturers will list data retention either as part of the specification or the warranty for their drives. The JEDEC Solid State Technology Association sets the industry standard at one year for consumer drives.

More alarming data comes in 2016 from Seagate’s Alvin Cox, who was part of a presentation to the Joint Electron Device Engineering Council (JEDEC), picked up by ZDNet, Slashdot and other sites.

The ZDNet article about this presentation, Leaving unpowered SSDs in a warm room can kill your data fast, says :

New research suggests that newer solid-state hard drives, which are faster and offer better performance, are vulnerable to an inherent flaw -- they lose data when they're left dormant in storage for periods of time where the temperature isn't properly regulated.

The worrying factor is that the period of time can be weeks, months, but even in some circumstances -- just a few days.

A recent presentation by hard drive maker Seagate's Alvin Cox warned that the period of time data is retained on some solid-state drives is halved for every 9°F (or 5°C) rise in temperature where its stored.

That means if a solid-state drive is stored in a warm room, say 77°F (25°C), its data can last for about two years. But, if that goes up by a mere few degrees to 86°F (30°C), that data's retention period will be cut in half.

The article The Truth About SSD Data Retention gives a more precise table for the calculated retention period in weeks before errors, as a function of both the running and ambient storage temperatures, for an SSD used by consumers (as distinct from enterprise) :

enter image description here

Keep in mind that the above table is only statistical in nature, so that your particular SSD can do even better, or even worse, than the above numbers.

My personal conclusion is that an SSD is a very reliable component when placed inside the computer case on an external housing, as long as it is regularly powered on and is not left unpowered for a long period.

I would therefore not recommend SSD for long-term storage, unless stored in the right temperature (which is what?) and is regularly powered on, verified, and left powered on for a time sufficient for the firmware to do its house-keeping (which is how long?). SSD is not reliable enough for the long term unless multiple copies are kept, which sort of defeats the purpose. Much more reliable technologies than SSD exist for this purpose.

2
  • "Much more reliable technologies than SSD exist for this purpose". Can you provide some examples? Maybe with links to articles? May 10, 2021 at 7:01
  • 1
    @ChrisRogers: See this post.
    – harrymc
    May 10, 2021 at 7:11
2

Most articles from before 2017 state that SSDs are Not a good choice for long term storage. This Article says:

How long an SSD can store data without power depends on a number of factors including the number of write cycles that have been used, the type of flash memory used in the drive, the storage conditions and so on. A white paper produced by Dell in 2011 (PDF link) stated that it could be as little as three months to as much as 10 years.

However, an article from 2017 recommends the use of SSDs, and a blog from 2018 states that the rumors about low data retention are just that, rumors. Most of the current studies now agree, though, that the three variables which impact SSD data retention typically are the amount of data written, the age of the drive, and the temperature the drive operates at or is stored in.

Seeing as improvements have been made to SSD's over the past few years it would be reasonable to expect the data retention has improved also. Although there is not much research on the topic of data storage on unpowered SSD's, it seems that it is relatively safe to archive data on them. A good recommendation for any data archived on either an HDD or an SDD though, is to occasionally plug in the drive and read the data simply to ensure the magnetic or electric fields stay as strong as possible.

3
  • What happened to the Dell PDF link?
    – Moab
    May 8, 2021 at 21:53
  • Reading the data is apparently not necessary; just powering on the drive should be enough as the controller automatically refreshes cells that need it. At least, I read that this is the case on newer drives. A limited source I can provide for this is this forum where people seem to be quite expert on the matter: dpreview.com/forums/thread/3700706. I'm sure there are better sources.
    – Ralph
    Feb 18, 2022 at 18:31
  • 3
    --->> "Seeing as improvements have been made to SSD's over the past few years it would be reasonable to expect the data retention has improved also. " <<--- consumers clearly see the improvement in capacity, so manufactures focus on capacity improvements. However, nobody knows the durability, and it isn't printed on the label, so manufactures would be less likely to focus on durability I imagine.
    – user12711
    Nov 3, 2022 at 20:36

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .