0

I've got some customers who should use a specific IP in their network adapter, but manually setting it is a pain sometimes. So I would like to know if there's a shell command / batch that allows me to set it without having to open "Network" -> "Adapter Setting" -> "Ipv4" -> "Ip Address".

Improve this question
0

1 Answer 1

Reset to default
2

Source

The command is: to change IP and default gateway: 

netsh int ip set address "local area connection" static 192.168.0.101 255.255.255.0 192.168.0.254 1

to change DNS: 

netsh int ip set dns "local area connection" static 192.168.0.254 primary

This is assuming 3 things.

1) The network adapter you're trying to change the IP for is "local area connection". It could also be "local area connection 2" or "wireless network connection". Look in your control panel for the correct name

2) The IP you want to set is 192.168.0.101, change this to whatever IP to want to use.

3) The default gateway and dns are the same IP. If you are using some kind of router they usually are. Change this to match your network config found with the command ipconfig /all

Improve this answer
1
  • appreciate it. Can I also get the adapter and store in a variable? To fully automate it?
    – dan
    Jan 8, 2014 at 14:00

Not the answer you're looking for? Browse other questions tagged .