0

It seems that there is an issue with the graphics of my laptop - sometimes it won't boot, when it does there are artifacts on the screen that make it impossible to use. I've piled up quite a number of symptoms over time. I wonder whether there is a way for me to avoid buying a new laptop. I'd even agree to try and open up the laptop myself - I have opened it before, but being fairly unexperienced, I was unable to find the culprit just like that.


For context, I should note that my laptop fell down from a short height about 3 years ago, which is why the left display hinge doesn't seem to be perfectly tight anymore - there is a tiny bit of wiggle room (as opposed to none at all on the right side), that doesn't seem to pose any immediate problems, though.

Initially, about half a year ago, the laptop (a DELL Vostro 3550, about 4 years old) would not boot if the last shutdown (after more than a few minutes of on-time) had been less than a few hours before that. Instead, it would beep (8 times, meaning there is an issue with the display). External screens would work fine if connected (i.e. the laptop would then seem to boot), but beeps would continue. Exposing the laptop to colder temperatures (and thereby cooling it down) did NOT seem to speed up the "process" after which it would boot again.

I discovered that the laptop would boot most of the time if I pressed my thumb right next to the " ^ " button in the top-left corner of the keyboard.

A few months in, "colorful" artifacts would start to appear on screen, mainly green spots/areas (where the black should be) and pink (where the white should be; i.e. the "faulty colors" move with the colors that are supposed to be displayed, which is e.g. why watching videos is near-impossible). I noticed immediately how the "amount" of particles tended to get larger or smaller depending on whether there was pressure on the upper left corner of the my laptop (next to the Escape button) and the lower left part of the display. In other words, artifacts would even disappear completely if I pulled the display forward a little, to change the kind of pressure on the "greater left hinge area".

I also noticed how the microphone and camera (integrated into the top of the screen) failed to work sometimes, but sometimes started to work again when I applied a bit of pressure to said upper left corner around the Escape and On/Off button.

By now the artifacts don't seem to disappear either way. Only when I changed the frequency down from 60Hz to 40Hz, the majority of the "artifacts" disappeared.


Can you make a diagnosis? Is it somehow possible to solve this issue? The "remaining" laptop still works fine, so I'd love to keep it.

I will add more symptoms in the hours to come, i.e. as soon as I remember them.


Pictures below. Again, the laptop has been working perfectly well like this for over 2 years.

Left hinge: (has ~2mm of excess room, compare the two if you like) Left hinge Left hinge (2), to show the extent of the "wiggle room"

Right hinge: (a bit bent, but otherwise perfectly fine) Right hinge - a bit bent, but otherwise perfectly fine

Corner: (slightly fractured) Corner

3
  • This really does sound like your laptop needs to be replaced. The artifacts sound like dead pixels. You can try and hook up an external monitor to confirm that the screen itself is broken. Do note that when a laptop is dying this badly, it can be due to electrical shortage somewhere. If this is indeed the case and things do short out, it may cause the laptop to catch fire. I would seriously advise to get your laptop replaced. 4 years for a laptop is quite some age anyway nowadays.
    – LPChip
    Jun 11, 2016 at 13:16
  • Connecting an external screen works perfectly well.
    – maj
    Jun 11, 2016 at 13:23
  • 1
    So the build-in flatscreen is dying.
    – LPChip
    Jun 11, 2016 at 13:25

2 Answers 2

2

Since you said that applying pressure by the Esc key, my guess would be that the flex cable that connects the display to the motherboard is damaged or loose. I recommend changing it.

Sometimes, when such cable damages, certain issues can occur. For example, the screen splits in a strange way, black color appears washed out, some colors change for others (i.e. green areas looking pink), dithering also can occur, etc.

Try opening the laptop and reconnecting the flex.

2
  • 1
    Turns out the cable was loose - or at least the "colors" seem to be gone, now that I've plugged the cable all the way in. I'll have to see whether the laptop will boot normally as well...
    – maj
    Jun 11, 2016 at 21:09
  • Nice that it was that, no need to replace anything. Cheers Jun 13, 2016 at 22:39
2

Without actually seeing the state of the laptop's physical condition and running some diagnostic software on it, right now, a best guess is about as accurate as you are going to get.

The laptop fell. This can cause all sorts of problems. You mentioned that the lid wasn't aligning properly any more so that means there is some breakage and/or twisting of the frame (aluminum frame, plastic case) so things aren't going to sit right. This can cause shorts or loose connections with internal components.

Your display is failing. Hooking your laptop to an external display and having it work is evidence that your internal components are fine. It's highly likely that your display is in the process of failing and it's time to replace.

If it's just your display, they are actually quite inexpensive on Amazon (last check was around $40). The bottom case is actually quite inexpensive as well and you can find them on eBay or Amazon.

Again, without actually seeing the laptop, it's just a best guess as to if these will actually fix your issues. However, having over 20 years experience in managing support organizations, I would place my bets here.

2
  • I added pictures, but again, it looks relatively fine from the outside.
    – maj
    Jun 11, 2016 at 16:05
  • "Looking fine" from the outside doesn't mean anything, its how everything fits on the inside. If you notice where the hinge is located in relation to your video port, you can bet that your graphics chip and your LVDS connector is around there too.
    – Allan
    Jun 11, 2016 at 16:09

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .