0

I have a 45w PD portable charger that has 1 USB Type C output at 45W, DC 5V/3A, 9V/3A, 15V/3A, 20V/2.25A and 2 USB Type A outputs with DC 5V/3.4A Total, DC 5V/2.4A max each.

The tablet charges using a 5V 3A ∮3.5mm / 1.3mm power adapter.

Is this possible? I am happy to purchase an adapter to go from the USB-C to the barrel plug if needed, but I can only find Type-A to barrel plug adapters. Thanks

2
  • 1
    Please provide product exact specifiations
    – Ramhound
    Feb 2, 2020 at 14:14
  • The most important question about this is: Is the original DC barrel positive or negative center? @Ramhound It might work, albeit at trickle charge. Which is probably not what they intend.
    – Natsu Kage
    Feb 2, 2020 at 14:14

1 Answer 1

0

You have two options here:

  1. Use the Type-C output. To use it you will need an adapter made of Type-C receptacle, and attach your 3.5/1.3 DC barrel plug to GND and VBUS. You will need to solder two 5.1k resistors between GND and CC1 and CC2 pins. The question is whether your charger outputs 3 A at 5V and therefore has 10k pull-ups on CC lines, or outputs only default 500/900 mA, and provides 3 A only after a PD contract is in place. Since your dongle won't have any PD, the standard Type-C power advertising must take precedence. So your success will depend on how your charger is designed.

  2. Use Type-A ports, both of them, with a Y-cable, and forget the Type-C. It is likely that just one Type-A to DC barrel cable will work just fine, assuming that the Type-A port receptacle on your charger has enough quality to carry 3 A.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .