0

The title is self-explained, on Windows PE, I used DiskGenius to fix the drive, the EFI partition is screwed so I decided to remake one.

After I got in PE, I opened DiskGenius, and realize it took so long to load, I saw the bad sectors message after it loads.

The message shows it has many bad sectors at around 2,000 to 2,500, then I tried to read it in hex editor, once I got to that part, it took like 10min to load, and a bunch of bad sector messages.

Also, whatever when I tries to verify the disk or use other tools to analyse the disk, it stuck forever(and if I tries to close it it took an hour to close).

So, I decided to fix them in Linux, then I booted into Ubuntu. While it boots, it show something about disk auth failed and limiting the speed of the disk(the bad sector one), after that, I ran badblocks -v /dev/sdb to find bad sectors, but surprise it didn't find any bad sector.

Then, I used gparted to remake the partition table, and got into pe again. I scanned again and problem remains. (Yes, there's still no bad sectors on Linux).

Drives: INTEL SSDSC2BW240A4(240gb, the screwed up one), TOSHIBA DT01ACA100(1tb, linux drive)
BIOS controller mode: ACPI, Hot plug enabled
Here is the SMART status information.

    === START OF INFORMATION SECTION ===
    Model Family:     Intel 53x and Pro 1500/2500 Series SSDs
    Device Model:     INTEL SSDSC2BW240A4
    Serial Number:    PHDA436001J52403GN
    LU WWN Device Id: 5 5cd2e4 04ba3de42
    Firmware Version: DC32
    User Capacity:    240,057,409,536 bytes [240 GB]
    Sector Size:      512 bytes logical/physical
    Rotation Rate:    Solid State Device
    TRIM Command:     Available, deterministic
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   ACS-2 (minor revision not indicated)
    SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
    Local Time is:    Sat Dec  3 21:35:57 2022 CST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    AAM feature is:   Unavailable
    APM level is:     254 (maximum performance)
    Rd look-ahead is: Enabled
    Write cache is:   Enabled
    DSN feature is:   Unavailable
    ATA Security is:  Disabled, NOT FROZEN [SEC1]
    Wt Cache Reorder: Unavailable
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x02) Offline data collection activity
                        was completed without error.
                        Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                        without error or no self-test has ever 
                        been run.
    Total time to complete Offline 
    data collection:        ( 5860) seconds.
    Offline data collection
    capabilities:            (0x7f) SMART execute Offline immediate.
                        Auto Offline data collection on/off support.
                        Abort Offline collection upon new
                        command.
                        Offline surface scan supported.
                        Self-test supported.
                        Conveyance Self-test supported.
                        Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                        power-saving mode.
                        Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                        General Purpose Logging supported.
    Short self-test routine 
    recommended polling time:    (   1) minutes.
    Extended self-test routine
    recommended polling time:    (  48) minutes.
    Conveyance self-test routine
    recommended polling time:    (   2) minutes.
    SCT capabilities:          (0x0025) SCT Status supported.
                        SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
      5 Reallocated_Sector_Ct   -O--CK   100   100   000    -    0
      9 Power_On_Hours_and_Msec -O--CK   100   100   000    -    6308h+03m+03.040s
     12 Power_Cycle_Count       -O--CK   096   096   000    -    4193
    170 Available_Reservd_Space PO--CK   100   100   010    -    0
    171 Program_Fail_Count      -O--CK   100   100   000    -    0
    172 Erase_Fail_Count        -O--CK   100   100   000    -    0
    174 Unexpect_Power_Loss_Ct  -O--CK   100   100   000    -    172
    183 SATA_Downshift_Count    -O--CK   100   100   000    -    50
    184 End-to-End_Error        PO--CK   100   100   090    -    0
    187 Uncorrectable_Error_Cnt -O--CK   100   100   000    -    0
    190 Airflow_Temperature_Cel -O--CK   030   051   000    -    30 (Min/Max 16/51)
    192 Power-Off_Retract_Count -O--CK   100   100   000    -    172
    199 UDMA_CRC_Error_Count    -O--CK   100   100   000    -    774
    225 Host_Writes_32MiB       -O--CK   100   100   000    -    1156140
    226 Workld_Media_Wear_Indic -O--CK   100   100   000    -    65535
    227 Workld_Host_Reads_Perc  -O--CK   100   100   000    -    49
    228 Workload_Minutes        -O--CK   100   100   000    -    65535
    232 Available_Reservd_Space PO--CK   100   100   010    -    0
    233 Media_Wearout_Indicator -O--CK   083   083   000    -    0
    241 Host_Writes_32MiB       -O--CK   100   100   000    -    1156140
    242 Host_Reads_32MiB        -O--CK   100   100   000    -    1133327
    249 NAND_Writes_1GiB        -O--CK   100   100   000    -    133125
                                ||||||_ K auto-keep
                                |||||__ C event count
                                ||||___ R error rate
                                |||____ S speed/performance
                                ||_____ O updated online
                                |______ P prefailure warning
    
    General Purpose Log Directory Version 1
    SMART           Log Directory Version 1 [multi-sector log support]
    Address    Access  R/W   Size  Description
    0x00       GPL,SL  R/O      1  Log Directory
    0x04       GPL,SL  R/O      1  Device Statistics log
    0x06           SL  R/O      1  SMART self-test log
    0x07       GPL     R/O      1  Extended self-test log
    0x09           SL  R/W      1  Selective self-test log
    0x10       GPL     R/O      1  NCQ Command Error log
    0x11       GPL,SL  R/O      1  SATA Phy Event Counters log
    0x30       GPL,SL  R/O     16  IDENTIFY DEVICE data log
    0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
    0xb7       GPL,SL  VS      16  Device vendor specific log
    0xe0       GPL,SL  R/W      1  SCT Command/Status
    0xe1       GPL,SL  R/W      1  SCT Data Transfer
    
    SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
    
    SMART Error Log not supported
    
    SMART Extended Self-test Log Version: 0 (1 sectors)
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Extended offline    Completed without error       00%      6305         -
    # 2  Offline             Interrupted (host reset)      10%      6300         -
    # 3  Offline             Interrupted (host reset)      10%      6158         -
    # 4  Offline             Interrupted (host reset)      10%      6155         -
    # 5  Offline             Interrupted (host reset)      10%      6154         -
    # 6  Offline             Interrupted (host reset)      10%      6153         -
    # 7  Offline             Interrupted (host reset)      10%      6153         -
    # 8  Offline             Interrupted (host reset)      10%      6153         -
    # 9  Offline             Interrupted (host reset)      10%      6153         -
    #10  Offline             Interrupted (host reset)      10%      6153         -
    #11  Offline             Interrupted (host reset)      10%      6153         -
    #12  Offline             Interrupted (host reset)      10%      6153         -
    #13  Offline             Interrupted (host reset)      10%      6153         -
    #14  Offline             Interrupted (host reset)      10%      6153         -
    #15  Offline             Interrupted (host reset)      10%      6153         -
    #16  Offline             Interrupted (host reset)      10%      6153         -
    #17  Offline             Interrupted (host reset)      10%      6132         -
    #18  Offline             Interrupted (host reset)      10%      6132         -
    #19  Offline             Interrupted (host reset)      10%      6132         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    SCT Status Version:                  3
    SCT Version (vendor specific):       0 (0x0000)
    Device State:                        Active (0)
    Current Temperature:                    29 Celsius
    Power Cycle Min/Max Temperature:     16/51 Celsius
    Lifetime    Min/Max Temperature:     16/60 Celsius
    Under/Over Temperature Limit Count:   0/0
    
    SCT Temperature History Version:     0 (Unknown, should be 2)
    Temperature Sampling Period:         1 minute
    Temperature Logging Interval:        10 minutes
    Min/Max recommended Temperature:      0/ 0 Celsius
    Min/Max Temperature Limit:            0/ 0 Celsius
    Temperature History Size (Index):    0 (455)
    Temperature History is empty
    
    SCT Error Recovery Control command not supported
    
    Device Statistics (GP Log 0x04)
    Page  Offset Size        Value Flags Description
    0x01  =====  =               =  ===  == General Statistics (rev 2) ==
    0x01  0x008  4            4199  ---  Lifetime Power-On Resets
    0x01  0x010  4            6316  ---  Power-on Hours
    0x01  0x018  6     75794083015  ---  Logical Sectors Written
    0x01  0x028  6     74298888900  ---  Logical Sectors Read
    0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
    0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
    0x04  0x010  4           17758  ---  Resets Between Cmd Acceptance and Completion
    0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
    0x05  0x008  1              29  ---  Current Temperature
    0x05  0x010  1              36  ---  Average Short Term Temperature
    0x05  0x018  1              35  ---  Average Long Term Temperature
    0x05  0x020  1              50  ---  Highest Temperature
    0x05  0x028  1              21  ---  Lowest Temperature
    0x05  0x030  1              43  ---  Highest Average Short Term Temperature
    0x05  0x038  1              31  ---  Lowest Average Short Term Temperature
    0x05  0x040  1              35  ---  Highest Average Long Term Temperature
    0x05  0x048  1              35  ---  Lowest Average Long Term Temperature
    0x05  0x050  4               0  ---  Time in Over-Temperature
    0x05  0x058  1              70  ---  Specified Maximum Operating Temperature
    0x05  0x060  4               0  ---  Time in Under-Temperature
    0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
    0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
    0x06  0x008  4           17758  ---  Number of Hardware Resets
    0x06  0x010  4            6388  ---  Number of ASR Events
    0x06  0x018  4             774  ---  Number of Interface CRC Errors
    0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
    0x07  0x008  1              20  ---  Percentage Used Endurance Indicator
                                    |||_ C monitored condition met
                                    ||__ D supports DSN
                                    |___ N normalized value
    
    Pending Defects log (GP Log 0x0c) not supported
    
    SATA Phy Event Counters (GP Log 0x11)
    ID      Size     Value  Description
    0x0001  2            3  Command failed due to ICRC error
    0x0003  2            0  R_ERR response for device-to-host data FIS
    0x0004  2            0  R_ERR response for host-to-device data FIS
    0x0006  2            0  R_ERR response for device-to-host non-data FIS
    0x0007  2            0  R_ERR response for host-to-device non-data FIS
    0x0008  2            3  Device-to-host non-data FIS retries
    0x0009  2          903  Transition from drive PhyRdy to drive PhyNRdy
    0x000a  2          460  Device-to-host register FISes sent due to a COMRESET
    0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
    0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
    0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
    0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
    0x0002  2            0  R_ERR response for data FIS
    0x0005  2            0  R_ERR response for non-data FIS
    0x000b  2            0  CRC errors within host-to-device FIS
    0x000d  2            0  Non-CRC errors within host-to-device FIS

The 1tb drive(not faulty one):

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    Y3N4LUAPS
LU WWN Device Id: 5 000039 ff7d02fa0
Firmware Version: MS2OA7L0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Dec 04 08:15:22 2022 TST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 7264) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 121) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   016    -    1
  2 Throughput_Performance  P-S---   142   142   054    -    70
  3 Spin_Up_Time            POS---   123   123   024    -    188 (Average 183)
  4 Start_Stop_Count        -O--C-   099   099   000    -    4176
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  7 Seek_Error_Rate         PO-R--   100   100   067    -    0
  8 Seek_Time_Performance   P-S---   108   108   020    -    37
  9 Power_On_Hours          -O--C-   099   099   000    -    10410
 10 Spin_Retry_Count        PO--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   099   099   000    -    4014
192 Power-Off_Retract_Count -O--CK   097   097   000    -    4178
193 Load_Cycle_Count        -O--C-   097   097   000    -    4178
194 Temperature_Celsius     -O----   136   136   000    -    44 (Min/Max 13/53)
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O---K   100   100   000    -    0
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL     R/O      7  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x20       GPL     R/O      1  Streaming performance log [OBS-8]
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        SMART Off-line Data Collection executing in background (4)
Current Temperature:                    44 Celsius
Power Cycle Min/Max Temperature:     40/44 Celsius
Lifetime    Min/Max Temperature:     13/53 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (74)

Index    Estimated Time   Temperature Celsius
  75    2022-12-04 06:08    38  *******************
  76    2022-12-04 06:09    39  ********************
 ...    ..( 50 skipped).    ..  ********************
 127    2022-12-04 07:00    39  ********************
   0    2022-12-04 07:01    40  *********************
 ...    ..(  3 skipped).    ..  *********************
   4    2022-12-04 07:05    40  *********************
   5    2022-12-04 07:06    39  ********************
   6    2022-12-04 07:07    40  *********************
 ...    ..(  3 skipped).    ..  *********************
  10    2022-12-04 07:11    40  *********************
  11    2022-12-04 07:12    41  **********************
  12    2022-12-04 07:13    41  **********************
  13    2022-12-04 07:14     ?  -
  14    2022-12-04 07:15    40  *********************
  15    2022-12-04 07:16    41  **********************
 ...    ..(  2 skipped).    ..  **********************
  18    2022-12-04 07:19    41  **********************
  19    2022-12-04 07:20    42  ***********************
 ...    ..(  8 skipped).    ..  ***********************
  28    2022-12-04 07:29    42  ***********************
  29    2022-12-04 07:30    43  ************************
 ...    ..( 14 skipped).    ..  ************************
  44    2022-12-04 07:45    43  ************************
  45    2022-12-04 07:46    44  *************************
  46    2022-12-04 07:47    43  ************************
  47    2022-12-04 07:48    43  ************************
  48    2022-12-04 07:49    44  *************************
 ...    ..( 25 skipped).    ..  *************************
  74    2022-12-04 08:15    44  *************************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            4014  ---  Lifetime Power-On Resets
0x01  0x010  4           10410  ---  Power-on Hours
0x01  0x018  6     38134590720  ---  Logical Sectors Written
0x01  0x020  6       776921956  ---  Number of Write Commands
0x01  0x028  6     73456085565  ---  Logical Sectors Read
0x01  0x030  6       827436983  ---  Number of Read Commands
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4           10320  ---  Spindle Motor Power-on Hours
0x03  0x010  4           10320  ---  Head Flying Hours
0x03  0x018  4            4178  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4             216  ---  Read Recovery Attempts
0x03  0x030  4              12  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              44  ---  Current Temperature
0x05  0x010  1              40  N--  Average Short Term Temperature
0x05  0x018  1              38  N--  Average Long Term Temperature
0x05  0x020  1              53  ---  Highest Temperature
0x05  0x028  1              13  ---  Lowest Temperature
0x05  0x030  1              48  N--  Highest Average Short Term Temperature
0x05  0x038  1              25  N--  Lowest Average Short Term Temperature
0x05  0x040  1              46  N--  Highest Average Long Term Temperature
0x05  0x048  1              25  N--  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              60  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4           21066  ---  Number of Hardware Resets
0x06  0x010  4           16960  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2            2  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
6
  • Check/show SMART please. Dec 3, 2022 at 11:28
  • Are you certain DiskGenius is complaining about the SSD, not the other drive? Can we see SMART for other drive too? Dec 3, 2022 at 14:01
  • @JoepvanSteen Yes, I'm sure about that, I will post other smart later.(the format may not be same because I'm on windows now)
    – You tube
    Dec 4, 2022 at 0:04
  • 1
    Why do you have such a high Unexpect_Power_Loss_Ct? This could be the root cause of the damage. Dec 4, 2022 at 0:32
  • @mashuptwice I don't know, either. The drive is from my small server, it only has 3 unexcepted power loss(the power cable screw up), and it was fully new bought from my friend 1 year ago (fully new because the package was not even opened).
    – You tube
    Dec 4, 2022 at 5:56

1 Answer 1

0

You missed to deliver proof of whatever shows errors in a traceable way. You did not explain why you think that your EFI partition is screwed.

There is one SMART line that caught my attention:

199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 774

Put your SSD in a different machine, see if the erroneous behaviour persists. If you intend to run chkdsk, duplicate your SSD before if there is data without backup that you still wish to recover.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .