Yesterday I started getting issues with AMD catalyst 13.4 (minidump of the crash was removed while restoring a restore point, I suspect). So I figured I'd uninstall 13.4 and install the latest version, 13.12. During installation I got another BSOD. I retried a few times and kept getting the same BSOD. I also tried driver versions 13.11 beta 9.5 and 13.9, but these gave the same BSODs. Eventually I installed 13.4 again, and it seemed to work properly, but today I again got a BSOD from 13.4.
I again tried to install a newer driver, but got the same BSOD during installation as I got earlier.
I've included some minidumps in a dropbox folder. Unfortunately, I can't tell which of these were caused during the installation of new drivers or by crashes from the old drivers; my minidump folder is cluttered with minidumps, and I lost a few while restoring restore points.
I've also reseated my graphics card, used a different DVI ouput and tested my RAM. There seems to be nothing wrong with the hardware. The default Windows video driver is also working without problems. The graphics card is a Club3D HD7950 RoyalKing.
When installing the driver manually, in safe mode, the installation works, but if I then reboot my PC I get a BSOD again.
2 BSODs are caused, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M 0x1000007E
and SYSTEM_SERVICE_EXCEPTION 0x3B
. The former during installation, and the latter when 13.4 crashes.
EDIT: Did some more testing. Any driver newer than 13.4 won't install. 13.4 and below do install. However, it only works for about a day. Then I get a BSOD (SYSTEM_SERVICE_EXCEPTION 0x3b). And then it fails to boot, with that same BSOD.
EDIT: I just got another BSOD from atikmpag.sys, while running the default Windows driver. I've checked, and it was still in system32/drivers. I've deleted it now.
Here are the screenshots @magicandre1981 requested:
Two of those are in my PC, slot 2 and 4
Microsoft Basic Display adapter, because I had to remove the faulty driver.