51

How can I change my DNS server from the Terminal on Mac OS X? [I need this because my DNS is not working correctly with my VPN. Sometimes it's using the DNS for my main connection, and sometimes it's using the DNS specified for the VPN (which it should).]

Improve this question

6 Answers 6

Reset to default
24

You can use scutil interactively from the terminal. Run sudo scutil and run these commands, swapping your DNS servers in where appropriate:

> open
> d.init
> d.add ServerAddresses * 8.8.8.8 9.9.9.9
> set State:/Network/Service/PRIMARY_SERVICE_ID/DNS
> quit

Instead of using 8.8.8.8 and 9.9.9.9 use your DNS servers.

The only problem is this is not persistent across reboots. If you want permanent changes, you'll want ncutil. The reason editing /etc/resolv.conf isn't sufficient in newer versions of OS X is because configd now uses a database to store information of current settings, which other applications read. Certain applications will still read /etc/resolv.conf (host for example), although that is not the case for all applications.

Improve this answer
5
  • 2
    8.8.8.8 is a valid one, though. Google's Public DNS. 8.8.4.4 is the secondary. :-)
    – Forgotten Semicolon
    Dec 21, 2009 at 19:03
  • John T, I want these servers to take priority over whatever servers are currently configured. Will it do that?
    – Dan Rosenstark
    Dec 21, 2009 at 19:17
  • 1
    It should. You can use scutil --dns to confirm.
    – user1931
    Dec 21, 2009 at 19:21
  • 2
    This does not seem to work on my Mac OSX 10.7.5 MBP, at least not when done literally. Should I replace anything in the set State:/Network/Service/PRIMARY_SERVICE_ID/DNS line or can I use that as it is ? Should the new DNS servers show up in the scutil --dns output after the change ?
    – ssc
    Oct 30, 2013 at 13:57
  • 2
    @ssc Run scutil followed by > list to find the key to replace PRIMARY_SERVICE_ID with.
    – J.Money
    Mar 31, 2015 at 2:12
70

You can use networksetup, e.g. for having the Airport connection use Google's DNS Servers:

networksetup -setdnsservers AirPort 8.8.8.8 8.8.4.4

You can find out the name of the network service by running networksetup -listallnetworkservices. It'll be 'Wi-Fi' probably.

This is the same as if you were to edit the entires in the Network Preference Pane in System Preferences, so it is persistent across reboots.

To reset the list of DNS servers, simply pass empty:

networksetup -setdnsservers AirPort empty

To set DNS automatically for multiple services, you can use a script like this, e.g. to use 1.1.1.1's servers:

services=$(networksetup -listallnetworkservices | grep 'Wi-Fi\|Ethernet\|USB')
while read -r service; do
    echo "Setting DNS for $service"
    networksetup -setdnsservers "$service" 1.1.1.1 1.0.0.1 2606:4700:4700::1111 2606:4700:4700::1001
done <<< "$services"

You may be running into a DNS issue on Snow Leopard that occurs when the order DNS servers are queried changes (see question 84144))

Improve this answer
4
  • Wow, 84144 is the problem I'm having. Still processing all of this.... thank you muchly!
    – Dan Rosenstark
    Dec 21, 2009 at 21:52
  • 10
    One note to anyone wanting to remove the DNS, just write "empty" (without the quotes) instead of the DNS: sudo networksetup -setdnsservers <networkservice> empty
    – jackJoe
    Nov 29, 2012 at 9:36
  • It is suggested that after changing the DNS is a good idea to flush caches: sudo discoveryutil mdnsflushcache.
    – Anastasios Andronidis
    Apr 23, 2020 at 13:42
  • 1
    Could you remove the commas in the general example? I found them misleading as I had to read your other example to see the actual syntax (no commas to separate entries).
    – Fredrik Wendt
    Jun 6, 2021 at 5:41
29

I don't have enough points to reply to Chealion's post but to add on to it I'd start with listing the interfaces

networksetup -listallnetworkservices

Once you have the interface you'd like to change you can do the below (I'm using the Wi-Fi but you can do any other interface)

sudo networksetup -setdnsservers Wi-Fi empty
sudo networksetup -setdnsservers Wi-Fi 8.8.8.8 8.8.4.4
sudo killall -HUP mDNSResponder

The first line of the above will empty out the DNS settings then follow it with the DNS servers we'd like to use and finely clear the DNS cache

To verify the DNS change you can do this before and after or simply after

scutil --dns | grep 'nameserver\[[0-9]*\]'
Improve this answer
3
7

resolv.conf does not work on OSX anymore. There is a notice right at the top of that file as follows:

#
# macOS Notice
#
# This file is not consulted for DNS hostname resolution, address
# resolution, or the DNS query routing mechanism used by most
# processes on this system.
#
# To view the DNS configuration used by this system, use:
#   scutil --dns
#
# SEE ALSO
#   dns-sd(1), scutil(8)
#
# This file is automatically generated.
#

Also, networksetup -listallnetworkservices does not list all VPN interfaces.

Here is one way to use scutil to target the right interface: 1. Create a file commands.txt with your commands for the interactive scutil tool. e.g. contents for Pulse secure interface in my case:

get State:/Network/Service/net.pulsesecure.pulse.nc.main/DNS
d.add ServerAddresses * 8.8.8.8 9.9.9.9
set State:/Network/Service/net.pulsesecure.pulse.nc.main/DNS
  1. Run scutil with the commands piped in. (You need sudo for set)
sudo scutil < commands.txt
Improve this answer
1

If you just want to resolve certain domains over the vpn you can do this. Not sure what all versions of macos this works on but it works on Big Sur. Just replace that IP with that of your nameserver over the vpn and the filename is the domain you want to resolve there. It seems to work pretty instantaneously, you don't need to HUP anything.

sudo bash
mkdir /etc/resolver
cd /etc/resolver
echo 10.10.10.1 > domain.tld
Improve this answer
1
  • It needs to be echo "nameserver 10.10.10.1" > domain.tld but otherwise this is a great solution and still works as of Monterey. You can customise all kinds of behaviour on a per-suffix basis, have a look at man resolver.
    – jbg
    Jul 15, 2022 at 2:53
0

You should be able to do it by editing /etc/resolv.conf (remember resolv.conf is reset after reboot), hope it helps - http://developer.apple.com/mac/library/documentation/Darwin/Reference/ManPages/man5/resolver.5.html

Improve this answer
1
  • 6
    As of older versions of OS X (10.2 and prior), that is the way to go. Not with newer releases though.
    – user1931
    Dec 21, 2009 at 19:06

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .