I tried a few times to scan newspaper articles, but the images I got were always blotchy and with bad colors, sort of like this:

enter image description here

Sometimes I see some really good scans, like this:

enter image description here

What is the trick to get such good results? Do I need a high-quality scanner, or some good Photoshop filters?

If there is something I can do using free tools, that would be awesome.

  • Off course the quality of the scanner will determine the quality of the pictures to some extend. You can always fix the quality with something like Photoshop, but a bad scanner will most likely always give bad pictures. What are you using right now? Scanner + Software
    – Ivo Flipse
    Jul 21, 2009 at 14:58
  • did you finally find out what the problem was?
    – Lazer
    Sep 23, 2009 at 10:35
  • I understand we are talking about scanner. But, has anyone tried using a digital camera instead ?
    – user179714
    Dec 12, 2012 at 7:08

4 Answers 4


A quick fix I do is to compensate for the low quality paper and printing, by adjusting the 'white point' and 'black point', efectively increasing the overall tonal contrast of the image.

Looking at your first example, the lightest parts of the image -- unprinted paper -- are actually a light grey and the darkest -- 'black' ink -- are a mid grey. And there's "blotchiness" in the lightest areas caused by the texture of the paper. One accepts this when viewing the original on paper, but not when viewing on screen, or when reproduced in higher quality print.

In Photoshop (sorry, not familiar with the Gimp, but I'm sure it's a similar process), I add a Levels adjustment layer to avoid altering the original pixel values, and then use the white point and black point sliders to "clip" the lightest and darkest points of the image to pure white and black. There's are eyedropper tools in the dialog for setting these points by sampling from the image, but it's easier to adjust the sliders manually.

Depending on context, I might add the paper colour back in as a a very light grey underlying layer, then set the scan layer's blending mode to "Multiply". This is essential if the original is printed on coloured paper, like the Financial Times.

  • You're absolutely right, in Gimp I just use contrast and then sometimes adjust the definition with a sharpness filter or unsharp mask. Working with levels is a bit more intensive, I often use the Quick Mask to selectively enhance certain areas of the image. The quality of the scanner isn't that important if you're making images for web work, everything on the web is lo-res, but if you want scans for print, you'll have to invest. Aug 11, 2011 at 18:54
  • It's also a good idea to scan the newspaper/magazine at an angle, to reduce the Moiré effect.
    – paradroid
    Dec 12, 2012 at 7:53

its old school, but put a sheet of black paper behind the newspaper. A lot of the issues are caused by the fact that newsprint is thin poor quality paper. The scanner sees the front and the back of the page at the same time. Black paper matches the black ink and makes the "back" side of the newsprint disappear.

  • Never underestimate the power of a simple analog solution! Dec 4, 2009 at 7:58
  • 1
    OP @itsadok did you try this, did it work? Aug 11, 2011 at 17:04
  • 1
    This makes sense, since newspaper is so transparent, whereas the magazine isn't so transparent, so it works a lot better. +1 for simple fixes!
    – studiohack
    Dec 12, 2012 at 7:28

It's fairly tricky to scan halftone-dithered images from newspapers without a bit of background as to what's going on with the dots.

I suggest you have a look at this article.

For best quality, you basically choose the right resolution (the same as the print) and scan using a descreening filter (often available in your scanner software). You can then apply a despeckling filter (like median) to remove most of the remaining artefacts.


Jim's tip of using a black paper behind the newspaper is very useful. In my opinion, any not too too old scanners are good enough to scan newspapers. The main problem is that newspaper is printed in low quality on poor quality paper comparing with photos. This problem can be resolved by software like photoshop.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.