0

I've been trying to create an EVIL AP scenario in my test lab for a couple of days, but I always face the same issue.

I can connect to the WIFI adapter and I receive an IP address etc, via dhcp.

However the main issue seems to be routing the traffic from wlan0 over to eth0 and out to the internet.

I believe it might be an iptables config issue but im not sure. Here are my current iptable configs:

iptables --t nat -A POSTROUTING --out-interface eth0 -j MASQUERADE iptables -A FORWARD --in-interface at0 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 192.168.0.33:80 iptables -t nat -A POSTROUTING -j MASQUERADE

migrated from security.stackexchange.com Feb 10 '16 at 16:07

This question came from our site for information security professionals.

  • do you have IP FORWARDING enabled? – JOW Feb 10 '16 at 14:28
  • Yeah its enabled echo 1 > /proc/sys/net/ipv4/ip_forward – Ron Feb 10 '16 at 14:31
  • If you look at the iptables usage counters, where does the traffic go? Another step is do a pcap on the wlan0 and then on the eth0 to see if its a problem with traffic leaving your AP, or returning. – Jeff Meden Feb 10 '16 at 16:30

Your Answer

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service, privacy policy and cookie policy, and that your continued use of the website is subject to these policies.