I want to install a WLAN repeater in my father’s holiday house which he rents out to other people.

My father is a digital neanderthal and doesn’t know where his router is, therefore I cannot configure my repeater to this router.

Are there any tools that could help me find that router in the house? I know that there are tools that tell you which Ethernet cable is in use and where it points to, so I figured maybe there are tools that help me find my router?

By “tools,” I don’t necessarely mean software, I’m also thinking about a hardware tool. I tried just going around with my cellphone and searching in the area with the best connection to the network but didn’t find the router.

Edit: Due to some comments that wanted more information about the router: It's a normal ADSL/VDSL router which sends WiFi signals. Distributed by the market leader ISP in my country. It also can do WPS. Here's a link: https://www.swisscom.ch/en/residential/help/device/internet-router/centro-grande.html

Update: Very special. The WIFI Signal was from the router inside my fathers home which is right next to the holiday house. So the Router actually had two different WIFI Signals, with two totally different strengths. In the Holiday house, signal A which my father uses for private stuff had only one line strength on the phone while signal B had 3 to 4. I can't really believe that something like this even exists, but the supporter from the ISP told me that it is like this. I asked "really?" and he said "100%, I can see it in my system".

  • 79
    Unless your father lives in a mansion there can't be that many places to hide a router ;) Look on the outside of the house to see where the phone or cable connection comes in. Look on the other side of that wall. That's the most likely place. Probably in the cupboard with the electric meter etc ...
    – DavidPostill
    Apr 10, 2016 at 10:46
  • 18
    @DavidPostill david believe me, i looked at every square centimeter there is ;). maybe my father can make things invisible, i don't know.
    – SimonS
    Apr 10, 2016 at 12:02
  • 52
    Use circuit breakers to localize the router.
    – waltinator
    Apr 10, 2016 at 14:24
  • 89
    Are you sure your father actually has a WiFi router and hasn't just been piggybacking off a neighbours open connection for years?
    – Paddy
    Apr 11, 2016 at 11:02
  • 10
    @DavidPostill It could be inside a wall
    – Izkata
    Apr 11, 2016 at 20:33

13 Answers 13


If you have a Android smartphone or tablet, you can use the WiFi Analyzer app. It has a screen dedicated to detecting proximity of access points:

Screenshot of "Wifi Analyzer"

Walk around the house and see where the signal is the strongest.

  • 3
    I found an interesting app for your Windows Phone: microsoft.com/en-us/store/apps/wifi-analyzer-preview/… (Didn't test it because I don't own a WP). Apr 10, 2016 at 22:23
  • 6
    @SimonS or use a laptop running such a program
    – barlop
    Apr 11, 2016 at 2:15
  • 42
    I have actually used this app for playing a variant of the "hiding" game with the kids. One hides a spare router somewhere in the house, and the other ones try to find it. The gauge is actually quite helpful and this app can be configured to scan once a second. We had some fun with it.
    – Marcel
    Apr 11, 2016 at 7:22
  • 3
    Note that there are somewhat limited cases where this may not work - if your router was on the opposite side of a lead wall from you, your gauge may be quite low despite how close you are to it. Similarly, a microwave being on could mess with the signal as well. Although I doubt your father has lead walls and humongous microwaves...if you really can't find it, I'd suggest having the app open and walking around the ENTIRE house - even if walking closer to a corner doesn't seem to yield anything, walk all the way to that corner, just in case.
    – Jake
    Apr 11, 2016 at 21:04
  • 4
    I'm constantly losing my router, so this tool is indispensable for me. Apr 15, 2016 at 17:17

You are going to laugh, but I was in the same situation. I could not find my mother-in-law's router as the cable company had installed it.

When my nephews came over they wanted to use WIFI on their Samsung Tablet. I told them that the WIFI code is on a sticker at the bottom of the router. They turned the whole house upside down, and found the router on a top shelf in the cupboard. I have no idea why it was placed there, maybe for reception. The wire running to it went through a wall, so it was obviously not an easy place to install. That technician really gave it his best.

So find some kids with a tablet and invite them over. They'll find the router if that is what stands between them and Facebook.

  • 24
    I recommend only using previously-known children. Apr 19, 2016 at 7:41
  • 10
    @Raystafarian "Mooom, that man from the big house on top of the hill has invited us over. He says we can use use his WiFi as much as we want if we find his antenna box... Can we go?"
    – Fiksdal
    Apr 22, 2016 at 16:14

Barring an obvious wire leading to it, then searching by WiFi signal strength should be good too. But not the "walk around blindly with a strength meter" approach, use an app that will map it for you.

ekahau Heat Mapper

It can make a map for you, that should give you a better idea of which corners to be concentrating your search in. It's for Windows, How-To Geek has a little guide about it. They say it's "essentially the free version of the multi-thousand-dollar Ekahau SiteSurvey."

The best part: It may find the router for you.

once we finished walking the entire map, HeatMapper pinpointed the location of the two access points within our office with uncanny precision. Look at the red arrows on the map below:

PinPoint Map

There are some Android/iPhone apps that should be similar too, try searching for one that works on your device. Maybe Telstra Wi-Fi Maximiser (for Android), here's it's screenshot:


My first ideas were to:

  1. I'd just follow the house wiring, starting from where they enter the house, and checking wherever the main cable or telephone "junctions" are, you didn't say if it's telephone/dsl, or tv (coax) cable, or pure network cable or fiber optic, but they all enter the house from somewhere. Unless you've got all underground utilities... but they probably don't enter through the basement, or "tube" would still come up from the ground somewhere outside the house.

    If some technician installed the router / network cable recently (they weren't built into the house originally) then try looking around the "main" tv or telephone areas, high & low anywhere within reach, check for mystery power cords plugged in around there and follow them.

  2. Phone the internet provider and ask them where they installed it. Maybe most of the houses in the area have a "standard" layout, or their installers always put them on the floor under tv's, or in the attics or someplace unexpected. Or they may have been good enough to take note of where it is in that house.

  • How does this app work?
    – Pacerier
    Mar 11, 2018 at 13:05
  • @Pacerier I don't know all the details, but I'd imagine they use the signal strength measured from different points to guess a circle of equal strength signals, then extrapolate to where the AP is probably located. Similar to locating a cell phone from it's signal strength to towers...
    – Xen2050
    Mar 13, 2018 at 4:16

You can use airodump-ng to scan for wireless networks. Once you see the network you're interested in, close and reopen airodump-ng with the arguments --bssid ... and -c ... corresponding to the BSSID and channel of the network, that way it won't waste time scanning other channels and will give you better update rate.

Now just walk around with the laptop and pay attention to the "PWR" column. The closer the number is to zero, the closer you are to the AP.


You can restrict search range by cut off electrical fuse for each room (if available ) so the wifi will turn off and you can localize room.

  • 20
    The router could be powered from one room, while being in another - like a commenter said they found a router inside a cupboard with holes drilled. And old houses sometimes have very weird fuses, like two rooms on different floors sharing a fuse, one outlet in each, crazy stuff.
    – Xen2050
    Apr 10, 2016 at 21:47
  • 3
    To give an example, I lived in a place where the wall outlets were on one fuse, while the ceiling outlets (for lamps) was on another.
    – Kristian
    Apr 11, 2016 at 12:45
  • 3
    I understand these situations and this was just a way to restrict the search range. Although I believe if you know a little about electrical circuits in house you can find the router.
    – Alberto
    Apr 11, 2016 at 13:57
  • 4
    @Xen2050, then this solution provides the bonus of learning oddities of how your house is wired. Apr 12, 2016 at 9:39
  • 6
    @Xen2050 A corollary is that if each circuit is distributed all over the house, it can complicate your intentional efforts to avoid overloading a single circuit - "The A/C, dishwasher, and laundry are all running, and someone is using a blow dryer in the front bathroom. Which outlet can I plug the vacuum into? And do I need to warn anyone not to use the microwave right now?" Apr 14, 2016 at 20:04

No need to use WPS. Because it’s not available on all routers, all “true” WiFi repeaters can also be set up manually.

As per this document, it’s very easy:

  1. Connect to your repeater via Ethernet (make sure WiFi isn’t connected)
  2. Go to http://repeater.local/ and follow the instructions

On many WPS-capable routers, you can also “push” the WPS button in its web interface, so you don’t have to go crawling under your desk.


Use a directional antenna. Sweep the house from at least 2 locations on opposite sides of the edge of the house. Use google maps and draw some lines or a cone where the signal is the loudest.

Then you'll have unsophisticatedly triangulated the router and have a far smaller area to search for it.

Directional antenna can be improvised with some foil and a plastic cup by surrounding a wireless card or a phone with a tinfoil-lined cup. Nowhere near as effective as a proper directional antenna, but it works.


I've done this using a packet sniffer like tcpdump or Wireshark on a laptop. Put your Wi-Fi card in 802.11 Monitor Mode, tune it to the channel your AP (wireless router) is on, filter on your AP's MAC address as Address 2 (transmitter address) of the 802.11 header, and then watch the RSSI (signal strength) column of your sniffer. (If your sniffer doesn't display the RSSI column by default, you might need to tell it to show that column.)

Then walk around, watching the RSSI column, and play "warmer/colder" until you find where signal strength is highest. -40 is very warm, -30 is super hot.

  • thank you spiff. I will try that if the "easier" suggestion from gronostaj don't get me in front of the router.
    – SimonS
    Apr 10, 2016 at 10:18
  • 1
    I would recommend airodump-ng instead, it automates all the monitor mode setup. You can still start a packet capture program on the interface afterwards though for this situation it's not needed. Apr 10, 2016 at 15:16

Check the attic ;)

But really, you can attempt to trace the cable/phone line into the house, although that may not be accurate. Go in the basement and trace the cable/phone line, whichever it uses. You will see it shoot up through the floor, most likely just in front of a wall (on the baseboard). Check both floors, and then the attic. I found a router deep in an attic once with this tactic.....granted, it was 3 floors above the spot the wire shot up via the basement.


If it's an ADSL router, it must be attached to a physical line somewhere. Find where the phone line comes into the house, and trace the phone lines from there. I assume the router is also plugged into a wall outlet and not battery-powered, but there are probably fewer phone outlets than electrical outlets in the house.


Connecting a wireless device to the repeater

  1. Plug the repeater into an outlet near the wireless router to configure it. Use a wireless device (for example a notebook, tablet, smartphone) to search for wireless networks in the vicinity.
  2. Connect it to the wireless network Repeater [...]". Enter the wireless network (password)… You should search information about your repeater
  • thank you for this suggestion, but to connect my repeater to the router, i need to click a button on the router itself and also on the repeater. so finding the router is a "must have" for this to work. Repeater & Router are from the same distributor, which is the ISP market leader in switzerland and they only offer this solution
    – SimonS
    Apr 10, 2016 at 9:58
  • which brand is your repeater
    – user555689
    Apr 10, 2016 at 9:59
  • swisscom, you won't know that one ;-)
    – SimonS
    Apr 10, 2016 at 10:00
  • Read this
    – user555689
    Apr 10, 2016 at 10:16
  • that's the instruction that came with the repeater. installing the repeater is not a problem at all. my problem is to find the router location. with the router I have, i need to push a button because i have an older model.
    – SimonS
    Apr 10, 2016 at 10:17

While all the software and hardware tool mentioned are worth thinking about it is sometimes easier to just trace the cable that connects the router to the ISP's external network.


  • Knowing with some certainty where the cable is at some point. An obvious place to look is where the cable enters the residence (works for satellite, too because you start at the dish).

  • The cable has to be sufficiently exposed to be traced. If the run is inside a duct, above a fixed ceiling, below a fixed floor and so on it may simply not be possible to follow.

  • You need to be able to access the the space where the cable runs easily enough to justify this. Mine runs through my crawl space which means hands and knees work on a dry gravel bed. I'm OK with that, but if it meant belly crawling in mud I'd try other things first. Runs in the attic where blow-in insulation has been added since the run was laid can be tough too (and come with the risk of missing your footing and stepping through the ceiling).


DIY: If you have an external antenna, Use aluminum foil to degrade the signal as much as you can. Or shape it in a way where you only receive signal from a certain direction. Walk around monitor signal strength and you'll find it pretty quick, likely when you have a full bar you're probably standing on it. No software required, Only eyes. Good luck

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .