0
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

C:\Windows\System32>route print
===========================================================================
Interface List
 25 ...00 03 0d 11 0b 30 ...... QF9700 USB2.0 To Fast Ethernet Adapter #2
 10 ...00 00 00 00 00 00 ...... Realtek RTL8168D/8111D Family PCI Gigabit Ethern
et NIC (NDIS 6.0)
  1 ........................... Software Loopback Interface 1
 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1     192.168.1.10    257
         10.0.0.0  255.255.255.192    10.35.133.193    10.35.133.230     21
    10.35.133.192  255.255.255.192         On-link     10.35.133.230    276
    10.35.133.230  255.255.255.255         On-link     10.35.133.230    276
    10.35.133.255  255.255.255.255         On-link     10.35.133.230    276
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      192.168.1.0    255.255.255.0         On-link      192.168.1.10    257
     192.168.1.10  255.255.255.255         On-link      192.168.1.10    257
    192.168.1.255  255.255.255.255         On-link      192.168.1.10    257
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link     10.35.133.230    276
        224.0.0.0        240.0.0.0         On-link      192.168.1.10    257
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link     10.35.133.230    276
  255.255.255.255  255.255.255.255         On-link      192.168.1.10    257
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
         10.0.0.0  255.255.255.192    10.35.133.193       1
          0.0.0.0          0.0.0.0      192.168.1.1  Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
 If Metric Network Destination      Gateway
 10    276 ::/0                     fe80::21a:a9ff:fe6d:4749
  1    306 ::1/128                  On-link
 10    276 fe80::/64                On-link
 25    276 fe80::/64                On-link
 10    276 fe80::309b:6e26:2534:bbbf/128
                                    On-link
 25    276 fe80::b00d:9184:d5e8:754/128
                                    On-link
  1    306 ff00::/8                 On-link
 10    276 ff00::/8                 On-link
 25    276 ff00::/8                 On-link
===========================================================================
Persistent Routes:
  None

C:\Windows\System32>tracert 10.35.130.10

Tracing route to 10.35.130.10 over a maximum of 30 hops

  1     1 ms     1 ms     1 ms  192.168.1.1
  2    33 ms    33 ms    33 ms  117.216.248.1
  3    34 ms    34 ms    34 ms

Here is the problem:

As it can be seen, though the persistent route tells to route the local traffic through 10.35.133.193, it is getting routed to 192.168.1.1. Please help.

  • What precisely do you mean by "local traffic"? Do you mean traffic to 10.35.130.10? What makes that "local"? – David Schwartz Apr 26 '16 at 9:33
1

According to your tracert result, it's absolutely normal that 10.35.130.10 routed to 192.168.1.1(default GW). As you can see, only 10.0.0.0/26(10.0.0.0 ~ 10.0.0.64) will be routed to 10.35.133.193. There are no route for 10.35.130.10, therefore it's routed to default GW. Just add 10.35.130.10's network entry routed to 10.35.133.193.

  • or you can just change 10.0.0.0/26 to 10.0.0.0/8(255.0.0.0) if local traffic uses all of 10.0.0.0/8. – Kamome Apr 26 '16 at 8:53

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.