I'm on linux slackware Smartctl said
smartctl -H /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.4] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
Failed Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 001 001 010 Pre-fail Always FAILING_NOW 51496
dmesg report no error
[161040.849645] ...........ready
[161051.091428] sd 6:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[161051.091435] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[161051.091896] sd 6:0:0:0: [sdc] Write Protect is off
[161051.091905] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[161051.092126] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[161051.157726] sdc: sdc1
[161051.159108] sd 6:0:0:0: [sdc] Attached SCSI disk
[161401.864311] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Currently i'm writing data on disk,no error.
Smartctl -a report this
smartctl -a /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.4] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Desktop HDD.15
Device Model: ST4000DM000-2AE166
Serial Number: WDH0PD56
LU WWN Device Id: 5 000c50 09d09cac0
Firmware Version: 0001
User Capacity: 4,000,787,030,016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5980 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Nov 10 04:56:26 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 581) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 613) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10a5) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 071 043 006 Pre-fail Always - 12590177
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9
5 Reallocated_Sector_Ct 0x0033 001 001 010 Pre-fail Always FAILING_NOW 51496
7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 5576438
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18 (102 172 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1521
188 Command_Timeout 0x0032 097 097 000 Old_age Always - 3 3 3
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 068 040 Old_age Always - 31 (Min/Max 30/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 161
194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 18 0 0 0)
197 Current_Pending_Sector 0x0012 007 006 000 Old_age Always - 7664
198 Offline_Uncorrectable 0x0010 007 006 000 Old_age Offline - 7664
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18h+09m+16.910s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 5995776308
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3798683410
SMART Error Log Version: 1
ATA Error Count: 1521 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1521 occurred at disk power-on lifetime: 16 hours (0 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 05:53:22.556 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:22.556 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:22.556 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:22.556 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:22.556 READ FPDMA QUEUED
Error 1520 occurred at disk power-on lifetime: 16 hours (0 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 05:53:19.284 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:19.284 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:19.283 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:19.283 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:19.283 READ FPDMA QUEUED
Error 1519 occurred at disk power-on lifetime: 16 hours (0 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 50 68 09 40 00 05:53:15.673 WRITE FPDMA QUEUED
61 00 01 08 68 09 40 00 05:53:15.663 WRITE FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:15.663 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:15.663 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:15.653 READ FPDMA QUEUED
Error 1518 occurred at disk power-on lifetime: 16 hours (0 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 05:53:12.273 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:12.262 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:12.253 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:12.243 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:12.243 READ FPDMA QUEUED
Error 1517 occurred at disk power-on lifetime: 16 hours (0 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 05:53:06.820 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:06.820 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:06.819 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:06.819 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 05:53:06.819 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 18 0
# 2 Short offline Completed: unknown failure 90% 18 0
# 3 Short offline Completed: unknown failure 90% 18 0
# 4 Short offline Completed: unknown failure 90% 17 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Question is..is broken?Or what else?
