I have hundreds of containers in various software virtual switches. I would like to know if its possible to find out which vnet# belongs to which docker container. Right now, I am detecting that by watching syslog as each container gets created. In KVM, there is a command "virsh domiflist ", which is exactly what i'm looking for.

4 Answers 4


The iflink of the container is the same as the ifindex of the veth#.

You can get the iflink of the container as follows:

docker exec -it <container-name> bash -c 'cat /sys/class/net/eth0/iflink'

Say, that results in 12, then grep for that:

grep -l 12 /sys/class/net/veth*/ifindex

That will give a unique result, on my system:


Combine that in a script:


for container in $(docker ps -q); do
    iflink=`docker exec -it $container bash -c 'cat /sys/class/net/eth0/iflink'`
    iflink=`echo $iflink|tr -d '\r'`
    veth=`grep -l $iflink /sys/class/net/veth*/ifindex`
    veth=`echo $veth|sed -e 's;^.*net/\(.*\)/ifindex$;\1;'`
    echo $container:$veth

The script was written to be easy to follow.

Sample run:

$ docker ps -q

$ sudo ./vethfinder

Reference: https://forums.docker.com/t/relationship-between-interface-vethxxxxx-and-container/12872/20

  • Thank you, but it for some reason doesn't always work. I have 50 containers, and the script above would return 1 or 2 blanks. When I look at the iflink value for both containers, they are not +1 from the value obtained from inside the container. Mar 2, 2017 at 6:20
  • This is a guess: It could be a timing issue. If containers are created too quickly after each other, then assigning the iflink values might get out of sync. The system might assign two consecutive iflink values to two containers, instead of alternating between the container and the system.
    – NZD
    Mar 3, 2017 at 0:37
  • This is interesting, I create and run the containers in a for loop, the last container iflink is always very different. For example, the iflink from /sys/class/net/veth###/iflink returns 4205, but the container's /sys/class/eth0/iflink shows 4216 Mar 4, 2017 at 0:27
  • Beats me. I tried a few things: starting a bunch of containers, verified that iflink lines up nicely. Stopped a few containers and created a few new ones, verified that iflink still lines up nicely. I got 115 containers running and my highest iflink was 244. How do you get to 4216?
    – NZD
    Mar 5, 2017 at 5:39
  • I also checked the post I got the information from. It states: "This can be found out by matching a container interface's iflink value with a host veth interface's ifindex value". My script uses iflink for both. Maybe try 'ifindex' for 'veth' ?
    – NZD
    Mar 5, 2017 at 5:51

searches for all interfaces in containers.


for container in $(docker ps --format '{{.Names}}'); do
    iflink=`docker exec -it $container bash -c 'cat /sys/class/net/eth*/iflink'`
    for net in $iflink;do
        net=`echo $net|tr -d '\r'`
        veth=`grep -l $net /sys/class/net/veth*/ifindex`
        veth=`echo $veth|sed -e 's;^.*net/\(.*\)/ifindex$;\1;'`
        echo $container:$veth

I am using a different method, which seem to work just fine:

[root@kh1 ~]# docker inspect 6d48e279c5b8 --format '{{.State.Pid}}'                                                                                                                                                                                                              
[root@kh1 ~]# 
[root@kh1 ~]# ip netns identify 56316
[root@kh1 ~]# 
[root@kh1 ~]# ip netns list | grep ns-56316
ns-56316 (id: 6)
[root@kh1 ~]# 
[root@kh1 ~]# ip link show | grep -B1 "link-netnsid 6"
330: veth1ce76e2b@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master cni0 state UP mode DEFAULT group default 
    link/ether de:f8:ce:a2:85:f9 brd ff:ff:ff:ff:ff:ff link-netnsid 6
  • I have created a tool that does the steps above automatically. You can download the linux x86_64 binary from here
    – mhristache
    May 29, 2018 at 11:36

Have a look here: https://stackoverflow.com/questions/37860936/find-out-which-network-interface-belongs-to-docker-container

There are examples of how one can fetch veth names for running docker containers without root access.

An example shell script can be found here: https://github.com/dicho-usp/dockerveth


PID=$(docker inspect $NAME --format "{{.State.Pid}}")
while read iface id; do
    [[ "$iface" == lo ]] && continue
    veth=$(ip -br addr | sed -nre "s/(veth.*)@if$id.*/\1/p")
    echo -e "$NAME\t$iface\t$veth"
done < <(</proc/$PID/net/igmp awk '/^[0-9]+/{print $2 " " $1;}')
  • 2
    Your answer could be improved with additional supporting information. Please edit to add further details, such as citations or documentation, so that others can confirm that your answer is correct. You can find more information on how to write good answers in the help center.
    – Community Bot
    Dec 16, 2021 at 13:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.