3

I have a malfunctioning USB device that causes the following error on boot:

xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-3: device not accepting address 6, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-3: device not accepting address 6, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-3: device not accepting address 6, error -62
usb usb2-port3: unable to enumerate USB device

I have to wait for it to timeout before I can input my dm-crypt password to continue the boot process.

Is there a way to disable that device so that the kernel doesn't care about it at all? I can't unplug it because it's builtin. I don't have anything I use on usb2 too so it's OK to disable the whole hub. I tried to blacklist cat /sys/bus/usb/devices/usb2/2-2/2-2:1.0/modalias and cat /sys/bus/usb/devices/usb2/2-0:1.0/modalias (all modalias I can find under usb2) but that didn't work.

EDIT: lspci output:

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Iris Graphics 6100 (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:15.0 DMA controller: Intel Corporation Wildcat Point-LP Serial IO DMA Controller (rev 03)
00:15.4 Serial bus controller [0c80]: Intel Corporation Wildcat Point-LP Serial IO GSPI Controller #1 (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1c.5 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 (rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
02:00.0 Multimedia controller: Broadcom Limited 720p FaceTime HD Camera
03:00.0 Network controller: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC (rev 01)
04:00.0 SATA controller: Samsung Electronics Co Ltd Device a801 (rev 01)
05:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
06:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
06:03.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
06:04.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
06:05.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
06:06.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013]
07:00.0 System peripheral: Intel Corporation DSL5520 Thunderbolt 2 NHI [Falcon Ridge 4C 2013]
08:00.0 PCI bridge: Intel Corporation DSL2210 Thunderbolt Controller [Port Ridge 1C 2011]
09:00.0 PCI bridge: Intel Corporation DSL2210 Thunderbolt Controller [Port Ridge 1C 2011]
0a:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM57762 Gigabit Ethernet PCIe
  • Could you please post "lspci" list ? with the usb controller info ? – dExIT Aug 3 '17 at 6:13
  • @dExIT I've updated with lspci output. – lilydjwg Aug 3 '17 at 7:55
  • Linux flavor, and if possible Kernel version, and if possible could you tell me the MoBo version/Laptop version on which this is happening ? And if possible also if you think you know what could be the culprit (always plugged in) please explain what is it. – dExIT Aug 3 '17 at 8:11
  • For linux flavor and kernel run : "uname -a" – dExIT Aug 3 '17 at 8:13
  • Try this approach: superuser.com/questions/575887/… – dExIT Aug 3 '17 at 8:24

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.