# Different Print Page Dimensions Under Same Standard (A4)?

2 different reputable sources list 2 different A4 page dimensions: 8.27 x 11.69 and 8.27 x 11.7.

Furthermore, I have 2 different PDF resize programs. 1 outputs A4 files as 8.26 x 11.69, the other outputs files as 8.27 x 11.69.

Thus, among 2 different sources and 2 different programs, there are 3 different outputs for A4: 8.26 x 11.69, 8.27 x 11.69, and 8.27 x 11.7.

Why are there so many different outputs for A4, and which is actually the correct dimensions?

• The correct A4 dimension are: 210 mm × 297 mm . Everything you mentioned are approximations.
– user772515
Jan 29, 2018 at 0:35
• The problem is that you're using primitive imperial measurements, about as useful as furlongs per fortnight as a measure of speed. Get with the metric system :-)
– user53528
Jan 29, 2018 at 5:56
• Hi, abcjme welcome on SuperUser. Can you edit your question and add the reference to the reputable sources. Just to be more complete. Jan 29, 2018 at 9:05
• 8.27 x 11.69 what? and 8.27 x 11.7? Furlongs? Potatoe-lengths? Jan 29, 2018 at 21:10
• A difference of 0.01 Arbitrary Units is less than the manufacturing error of your typical sheet of paper.
– Mark
Jan 30, 2018 at 0:00

It is just because of rounding errors, due to how dimensions were computed, starting from A0, there are mathematical properties to define each subsequent format.

However the A4 standard says it is 210 mm × 297 mm with tolerances: ±2.0 mm for dimensions in the range 150 to 600 mm.

See the wikipedia entry: https://en.wikipedia.org/wiki/ISO_216#A_series

Now you seem to deal with inches (you did not say!), so 210mm is 8.26772 inches, which would round to 8.27 and 297mm is 11.69291 inches, hence 11.69 if rounded to two digits after the decimal. Of course that will be respectively 8.3 and 11.7 if you round to one digit only.

• It's worth saying explicitly that all numbers in the question are valid as ISO 216 A4, as all are within tolerance. Jan 29, 2018 at 15:38
• @Mołot Though how often do you see A4 paper that is even 1mm out? Jan 29, 2018 at 15:51
• @curiousdannii Though how often do you measure A4 paper? Jan 30, 2018 at 1:53
• @DigitalTrauma - I regular place A4 sheets from different sources on stacks together, and would notice a difference of more than about 1/2mm on doing so. It's a rare occurrence that even this much error occurs (the only time I've ever seen it was a set of headed paper that was cut down from A3 sheets by the printer using a badly calibrated guillotine, leaving half the stack slightly too wide and half slightly too narrow). Jan 30, 2018 at 9:45
• @curiousdannii actually pretty often,when I'm using very cheap printing paper or when I'm using expensive one that only comes in A3 format and is cut in half in printing shop. Within tolerance = I can't file a compliant. Jan 30, 2018 at 10:55