How can I convert a video file to a sequence of images, for example one frame every N seconds. Can mplayer or ffmpeg do this? I have used MPlayer to grab screenshots manually but I would like to automate this for a long video.
It's very simple with ffmpeg, and it can output one frame every N seconds without extra scripting. To export as an image sequence just use
myimage_%04d.png or similar as the output. The
%0xd bit is converted to a zero-padded integer
x digits long - the example I gave gets output as myimage_0000.png myimage_0001.png etc.. You can use lots of still image formats, png, jpeg, tga, whatever (see
ffmpeg -formats for a full list).
Ok so to export as an image sequence we can use an image format as the output with a sequential filename, but we don't want to export every single frame. So simply change the frame rate of the output to whatever we want using the
-r n option where
n is the number of frames per second. 1 frame per second would be
-r 1, one frame every four seconds would be
-r 0.25, one frame every ten seconds would be
-r 0.1 and so on.
So to put it all together, this is how it would look to save one frame of input.mov every four seconds to output_0000.png, output_0001.png etc.:
ffmpeg -i input.mov -r 0.25 output_%04d.png
Change the %xd to however many digits you need, e.g. if the command would create more than 10,000 frames change the
%05d. This also works for input files that are image sequence. Read more here.
On the command line use
ffmpeg -i inputFile.mp4 -r 1 outputFile_%02d.png
In CMD and BAT Scripts use
ffmpeg -i inputFile.mp4 -r 1 outputFile %%02d.png
Don't use just one
% in scripts, and don't use
%% in command line. Both situations will generate an error.
mplayer -vo jpeg -sstep 5 file.avi
will save a frame as a jpeg file every 5 seconds.
However, it will not stop at the end of the file, it will continue producing copies of the last frame. To avoid this, find the duration of the video in seconds, using another player, or with mplayer:
mplayer -vo null -ao null -frames 0 -identify file.avi
and look for a line like "ID_LENGTH=147.00".
Subtract 2 from the length, and use this value for the
-endposoption. For example, for a 147 second video:
mplayer -vo jpeg -sstep 5 -endpos 145 file.avi
ffmpeg, you can do the following:
ffmpeg -ss 4 -i input.avi -s 320x240 -frames:v 1 output.jpg
This command generates a 320×240 sized JPG thumbnail at the 4th second in the video. Put this in a script that changes the time and file name and you're done.
If you are after a kind of contact sheet and if you are working with a Unix-like OS, you can use this elaborate script, called to the point Video Contact Sheet *NIX, short vcs.
In the background it also uses
ffmpeg (by default) or
mplayer, hence can handle a lot of video formats. It automates the process of capturing still images from the movie and compose these to an image with some header and footer. You can choose e.g. how many captures you want or alternatively the time differences between them.
For a interval of 10 minutes, the invocation is like that:
vcs -i 10m input.avi
Check the full list of commandline options for some other tweaks.
Here is an example contact sheet, taken from the homepage:
With VLC 1.1.0 and above, you can use the scene video filter:
vlc C:\video\to\process.mp4 --rate=1 --video-filter=scene --vout=dummy --start-time=10 --stop-time=11 --scene-format=png --scene-ratio=24 --scene-prefix=snap --scene-path=C:\path\for\snapshots\ vlc://quit
The above saves 1 out of every 24 frames (--scene-ratio=24), starting at 00:00:10 and ending at 00:00:11.
Just tested and confirmed this works with VLC 2.0.3 on a fresh Windows 8 installation (I have no additional video plugins or software).
Full documentation: http://wiki.videolan.org/How_to_create_thumbnails
VirtualDub can do this for you
You could also try this
from the VLC command line...
vlc "C:\YOUR\file\path\file.avi" -V image --image-out-prefix=capname --image-out-ratio=60
file.avi is the video you want to capture from, capname is the prefix of the saved images, you might want to play around with the ratio (60 means that 1 out of 60 images is captured) You can add more commands, for example --image-out-format jpeg will save your caps as jpegs instead of of pngs, --snapshot-path lets you choose where to save your caps.
You can skip frames in VirtualDub. Just use "Decimate By" option located at Video -> Frame Rate menu. For example if you set "Decimate By 100" then use File -> Export -> Image sequence, it will save only every 100th frame.
protected by slhck Nov 20 '14 at 19:12
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?