17

Problem

I would like to use my host dGPU to train some neural networks using its CUDA cores via my Ubuntu 16.04 guest in Oracle VM VirtualBox version 5.2.22. Would it be possible to do this?

Host setup:

Windows 10.0.17763.195 (1809) Pro x64
Intel i7-6700HQ (Intel HD Graphics 530)
NVIDIA GeForce GTX 960M (CUDA Cores 640) via PCI Express x16 Gen3, DirectX v12.0 (FL 11.0)
Virtualization is Supported, Enabled via UFEI and OS

Guest setup:

Ubuntu 16.04
Chipset PIIX3 with Enabled I/O APIC
Processor has enabled PAE/NX
VT-X and AMD-V are Supported, Enabled
Nested Paging, Enabled
3D Acceleration Enabled
Extension Pack is installed

enter image description here

Note: A previous question asked about using the windows 7 host's Nvidia GPU inside VirtualBox for gaming. This question is about a different setup, and purpose and is too old to be useful today. Another question asks about using a graphics card in VirtualBox but this is also an old question.

3 Answers 3

15

Upon much digging this is currently possible but only with limited configurations, specific host OSes, and the use of enterprise software.

Windows Server 2016 and above but with Hyper-V

  • This is only possible with Windows Server as the host and Hypervisor. It is not available with windows 10 pro as the host as stated in the question above.

Ubuntu 18.04 and above with Virtualbox

  • PCI passthrough is required but it was removed in VirtualBox 6.1: https://www.virtualbox.org/wiki/Changelog-6.1
  • The guest and host have to both have a Linux kernel that has been compiled with IOMMU support, including DMA remapping, according to the virtualbox documentation. This is done by default in the latest version of Ubuntu.
  • The command find /sys | grep dmar and dmesg | grep IOMMU will tell you if the kernal has been compiled with IOMMU support. DMAR: IOMMU enabled is what you are looking for.

Windows 10 Pro but with VMware Workstation Pro 15 or VMware ESXi

  • VMware allows for a couple of ways for GPU passthrough or sharing with the guest VM systems. Again, VT-d or AMD IOMMU has to be enabled on the host.
10
+25

This seems possible under Linux and there are detailed instructions for doing that.

Your CPU supports the required VT-d capability, and hopefully your (unspecified) motherboard as well. You also have two graphical adapters, so can afford to give up one to the VM (remembering that your other GPU is rather limited).

There are various articles on the subject which you will need to test, as I don't have the environment for it. The VM's chipset seems to need to be ICH9, although not mentioned in the tutorials. You might need to use the virtual manager that is named in each article.

Here are the references :

3

If the graphics card is not the principal one in your system, you can think about using PCI passthrough to the VM, so the guest OS can access it directly. Unfortunately it seems the VBox does not support this feature (read here), and I don't know if it is supported on other desktop virtualization software.

Anyway if your graphics card is also used by the Host OS, you cannot perform the PCI passthrough.

Update

It seems also other desktop virtualization software does not support PCI passthrough (the post I found seems recent enough)

  • Hyper-V in windows 10: read here
  • VMware workstation: read here

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .