25

I would like to mount a remote file system (A) using SSHFS, but sometimes I have IP address, access from which is not allowed. So my plan is to access it via another machine (B) in that network. Do I need to mount A on B and then to mount B (and A) on my local computer? Is there a better way to do it?

Update

Just to clarify the procedure:

First, I make a tunnel

ssh -f user@machineB -L MYPORT:machineA:22 -N

And then I mount the remote file system

sshfs -p MYPORT user@127.0.0.1:/myremotepath /mylocalpath

Is it correct?

How do I destroy the tunnel when I am done?

  • 1
    better way to set up tunnel is to have connection to B from GNU screen window using ssh user@machineB -L 2222:machineA:22 -N so you can easily kill it with ^C – edk May 9 '10 at 16:03
9

yeah tunneling. You connect machine B, create local tunnel (-L) to SSHd port of machine A then sshfs to localhost to the port of newly created tunnel.

  • Is the following command the right way to do that? ssh -f user@machineB -L 25:machineA:25 -N – Andrei May 8 '10 at 14:00
  • 1
    yes if you have sshd listening to port 25 on machine A. then you'll just have to sshfs -p 25 user@127.0.0.1:/path /localpath – edk May 8 '10 at 14:20
  • 1
    Aha, so for default ssh setup I need ssh -f user@machineB -L 22:machineA:22 -N, right? – Andrei May 8 '10 at 15:32
15

You can use option ssh_command of sshfs to do the trick:

sshfs ma: /mnt -o ssh_command='ssh -t mb ssh'

Unmount with the usual

fusermount -u /mnt

Sorry this is 7 years late...

  • 5
    With the new -J option in Openssh 1.1 it is something along: sshfs ma: /mnt -o ssh_command='ssh -J mb' – Ohad Rubin Jul 18 '18 at 1:25
0

Your connection scheme: Your machine --> Host B --> Host A

Our solution will use Proxy Jump, introduced in OpenSSH 7.3, so you'll need to check that your version is newer with:

ssh -V

Then you need to configure properly your ~/.ssh/config. For example, if machineB is available with a password login from machineA :

machineB
    HostName {machineB ip address}
    User {machineB username}
    Port {machineB port-number}
    IdentityFile ~/.ssh/{machineB private ssh key}

machineA
    ProxyJump machineB
    Hostname {machineA ip address, maybe in local network}
    User {machineA username}
    Port {machineA port-number}

Finally, create your mountpoint and add line to /etc/fstab

machineB:{machineB mount path}  {your local mountpoint}  fuse.sshfs delay_connect,_netdev,user,idmap=user,follow_symlinks,identityfile={local path to machineB private key},default_permissions,uid={local user uid},gid={local user gid} 0 0
  • Does this have any benefit vs. using only -o ssh_command="ssh -J machineB" ? – clemisch May 18 at 8:27

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.