0

I'm finally running out of space on a 128GB ssd on a notebook (N501VW) and am thinking of replacing it with a larger, 500GB, drive.

The setup:

  • 1 notebook (N501VW) running Win 10 (x64)
  • 3 drives (128GB ssd (M2) (C:), 1TB hdd (D:), 500GB ssd (M2))

128GB:

C:\WINDOWS\system32>fsutil fsInfo ntfsInfo C:\
NTFS Volume Serial Number :        0x246467166466ea4e
NTFS Version   :                   3.1
LFS Version    :                   2.0
Number Sectors :                   0x000000000ec25e12
Total Clusters :                   0x0000000001d84bc2
Free Clusters  :                   0x000000000012ce83
Total Reserved :                   0x00000000000450b8
Bytes Per Sector  :                512
Bytes Per Physical Sector :        512
Bytes Per Cluster :                4096
Bytes Per FileRecord Segment    :  1024
Clusters Per FileRecord Segment :  0
Mft Valid Data Length :            0x0000000036840000
Mft Start Lcn  :                   0x00000000000c0000
Mft2 Start Lcn :                   0x0000000000000002
Mft Zone Start :                   0x00000000005404a0
Mft Zone End   :                   0x0000000000540760
Max Device Trim Extent Count :     512
Max Device Trim Byte Count :       0xffffffff
Max Volume Trim Extent Count :     62
Max Volume Trim Byte Count :       0x40000000
Resource Manager Identifier :      8A0D0FB6-C261-11E6-8455-9CEBE8321CA9

1TB:

C:\WINDOWS\system32>fsutil fsInfo ntfsInfo D:\
NTFS Volume Serial Number :        0x38f0efcbf0ef8e06
NTFS Version   :                   3.1
LFS Version    :                   2.0
Number Sectors :                   0x0000000074705fff
Total Clusters :                   0x000000000e8e0bff
Free Clusters  :                   0x000000000497daa5
Total Reserved :                   0x00000000000013ff
Bytes Per Sector  :                512
Bytes Per Physical Sector :        4096
Bytes Per Cluster :                4096
Bytes Per FileRecord Segment    :  1024
Clusters Per FileRecord Segment :  0
Mft Valid Data Length :            0x0000000099940000
Mft Start Lcn  :                   0x00000000000c0000
Mft2 Start Lcn :                   0x0000000000000002
Mft Zone Start :                   0x0000000009a85600
Mft Zone End   :                   0x0000000009a8fd40
Max Device Trim Extent Count :     0
Max Device Trim Byte Count :       0x0
Max Volume Trim Extent Count :     62
Max Volume Trim Byte Count :       0x40000000
Resource Manager Identifier :      14ED2385-C262-11E6-A546-9CEBE8321CA9

500GB:

not purchased as of yet

The plan:

  1. Boot from a Linux (e.g. arch) usb image
  2. Copy C:\ into D:\ (D:\ still has space)
  3. Shutdown, replace C:\ with larger ssd
  4. Boot (again) from usb
  5. Copy C:\ from D:\ into larger ssd
  6. Shutdown; boot from larger ssd
  7. If all's well, clear former C:\ from D:\

The bad:

  1. Will a dd format the new ssd entirely upon copy (from D:\ to 500GB)?
  2. If not how much of 500GB will be usable?
  3. Since 128GB is small, there are many simlinks to D:. Will they be affected upon copy?
  4. Is this even the right way of doing this?

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.