I have a Windows host, with Hamachi installed and it is connected to a Network with N clients;
I also have a Kali Linux running in a VirtualBox setup;
How can I make my Kali Linux ping the clients that my Windows host can ping? In other words I want my VM to ping everything my host pings.
Things I've tried:
1) Setting the first network adapter as NAT and the second as bridged LogMeIn adapter;
2) Installing Hamachi on the VM and connecting to the same Network as my Host (curious fact: I can see the host is online but cannot ping it; but the host can ping the VM with Hamachi IPv4);
3) Setting the first network adapter as bridged ethernet and the second as bridged LogMeIn adapter;
4) Setting eth0 as NAT, eth1 as the host's Hamachi adapter Bridged and, inside Kali, making a bridge br0 between those two. I ran out of ideas and have little networking knowledge.
EDIT: Ok, so I finally made my VM ping my host hamachi IP help from this similar question.
I just had to add the following lines to my
# The primary network interface allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug eth1 iface eth1 inet dhcp
Also, I have eth0 as NAT and eth1 as the host's Hamachi Adapter in Bridge Mode.
I had to take down the Linux's Hamachi interface
ham0, so installing Hamachi in the VM is useless.
But still I cannot ping the Hamachi IPs my host knows.