Hello SuperUser Community,

I'm new to Linux Ubuntu, long time Windows User, and glad I'm making the switch. When setting up my desktop PC, I am subjected to an annoying and repetitive speaker 'pop' about every 2 seconds. This pop occurs regardless of volume level. It does stop if I unplug the audio jack to my speakers, and just use the speaker built into the motherboard. If I play a sound, the popping stops while the sound is playing and for about 5 seconds after, then resumes.

I am running Linux Ubuntu 18.04.3 LTS. The system information reports two Audio Adapters, HDA-Intel - HDA ATI SB & HDA-Intel - HDA NVidia

I did eventually find the solution to this problem, but I don't have enough reputation points to post Q&A together.

2 Answers 2


The operation system's default behavior is to save power by turning off the Audio Adapter after 10 seconds. This power-save feature is causing the popping, and can be disabled.

In Terminal type sudo nano /sys/module/snd_hda_intel/parameters/power_save and change the value from 1 to 0.

Then type sudo nano /sys/module/snd_hda_intel/parameters/power_save_controller and change the value from Y to N.

On my system, this solved the audio popping problem immediately. However on reboot, the problem came back and I found these values had been reset. To keep these values persistent, I had to add a line of code to /etc/modprobe.d/alsa-base.conf I added this after the last line of code in the file, options snd-hda-intel power_save=0 power_save_controller=N

Save the file, and you're good to go!

Much of my information came from this video : https://www.youtube.com/watch?v=Pdmy8dMWitg

I had to piece together the "persistence after reboot" part, and my setting did reset even though I do not have TLP installed. Note that the video claims otherwise.

I was quite frustrated with Ubuntu until I figured this out. I hope this helps many people solve their audio issues!

  • 1
    This worked for me. Thanks!
    – Raknos13
    Jul 11, 2020 at 4:09
  • I also have this problem. I could fix the issue on my ubuntu. But when I turn off, restart or suspend the system, The problem is still occurred. What to do for shut down????
    – Emad Helmi
    Nov 20, 2020 at 21:53
  • @Emad Helmi: Did you edit alsa-base.config? You have to add a line of code at the end of this file, otherwise the speaker pop will come back when you restart the computer. See my answer above.
    – Glen
    Nov 22, 2020 at 1:07
  • @Glen: Yes! I edited that file. everything's ok when my ubuntu is on. just when I shut down my laptop, I again hear that sound. Also at the startup of the ubuntu, I hear that sound 2 or 3 times and after login, all thing's good! When I connect my laptop to HDMI also, I hear that sound on shutdown or startup from both monitor and laptop speakers
    – Emad Helmi
    Nov 22, 2020 at 8:50

As a followup to @Glen's answer, here is a script that performs the task:

    Script that fixes a popping sound due to a power saving feature

    sudo echo "obtaining sudo"
    # First, there are two system files that need modification
    # Changing the values here should fix the issue in your current session. 
    cat /sys/module/snd_hda_intel/parameters/power_save
    cat /sys/module/snd_hda_intel/parameters/power_save_controller
    # Flip the 1 to a 0
    sudo sh -c "echo 0 > /sys/module/snd_hda_intel/parameters/power_save"
    # Flip the Y to a N
    sudo sh -c "echo N > /sys/module/snd_hda_intel/parameters/power_save_controller"

    # To make this change persistant we must modify a config file
    if [ -f "/etc/default/tlp" ]; then
        # Some systems (usually laptops) have this controlled via TLP 
        sudo sed -i 's/SOUND_POWER_SAVE_ON_BAT=1/SOUND_POWER_SAVE_ON_BAT=0/' /etc/default/tlp
        # This line contained a typo, addressed on 2020-10-11 11:11 Bcn time
        sudo sed -i 's/SOUND_POWER_SAVE_CONTROLLER=Y/SOUND_POWER_SAVE_CONTROLLER=N/' /etc/default/tlp
    elif [ -f "/etc/modprobe.d/alsa-base.conf" ]; then
        # Append this line to the end of the file
        text="options snd-hda-intel power_save=0 power_save_controller=N"
        # Apppend the text only if it doesn't exist
        found="$(grep -F "$text" "$fpath")"
        if [ "$found" == "" ]; then
            sudo sh -c "echo \"$text\" >> $fpath"
        cat "$fpath"
        echo "Error!, unknown system audio configuration" 1>&2
        exit 1
  • Hey @Erometic Seems that there is a typo. It should has the W: poWer (not POER): sudo sed -i 's/SOUND_POER_SAVE_CONTROLLER=Y/SOUND_POER_SAVE_CONTROLLER=N/' /etc/default/tlp Oct 11, 2020 at 11:06
  • I fixed, but Community has to approve. Oct 11, 2020 at 11:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.