36

I'm talking about:

1903

NOT:

10.0.18362.592

How do I get the version, such as "1903", instead of the "build number"?

  • 1
    1903 is built number itself, the lates version number of windows <19 for sure – Navruzbek Noraliev Jan 23 at 14:16
  • 3
    The big problem with this seems to be the inconsistency with the naming of the build numbers and the version numbers. What some refer to as the build number other's refer to as the version number and vice-versa – SpacePhoenix Jan 23 at 19:42
  • @SpacePhoenix that seems to be a matter of perspective. When you navigate to Start > Run and enter winver, it very clearly shows you the Version as well as the OS Build number. As a result, the "big problem" really seems to be customer education. – Run5k Jan 25 at 15:50
  • 3
    There are two commands, see the difference: ver vs. winver. – JosefZ Jan 25 at 20:11
  • 2
    Does this answer your question? How to find the build / version of Windows 10 – JosefZ Jan 25 at 20:11
49

How do I get the version, such as "1903", instead of the "build number"?

The following PowerShell command will provide the information you are seeking.

(Get-ItemProperty -Path ‘HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion’).ReleaseId

or a registry query from the command prompt:

REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" | findstr ReleaseId

Source: How to get Windows version from the command prompt or PowerShell

I have no words for this. I've been spending a ridiculous amount of time searching and searching and searching a million times, and every single webpage on the Internet keeps telling me about the worthless "ver" command or "wmic blabla," all of which does not give you the version number.

However, I must point out that the version of Windows you are using, actually is the Build version (i.e., 18363) instead of ReleaseID (i.e., 1909). You would use [System.Environment]::OSVersion.Version to tell the difference between Windows 7 Service Pack 1 and Windows 7 RTM.

| improve this answer | |
27
Reg Query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ReleaseId

enter image description here

| improve this answer | |
16

Powershell

Get-ComputerInfo -Property "WindowsVersion"

Powershell Get-ComputerInfo output

Picture 1: Above the whole output of the Get-ComputerInfo powershell invocation, without options.

Some words more

The Microsoft Windows operating system was first labelled with standard version numbers from 1 to 3.11 (read the full chapter [w])... then after some leaps and many years, in windows 10 the subsequent OS updates only incremented the build number and update build revision (UBR) number (see below).

In windows 10 the version number requested by the OP is based on the date of the most recent large build release and uses a YYMM format [2]. This version number is the one we can find e.g. via Settings panel, then System > About and we can read the Version (Shortcut Windows+I) and gives a prompter information about the OS update state.

Version[2] The version number gives you the best information on what version of Windows 10 you’re running. The number is based on the date of the most recent large build release and uses a YYMM format. For example, in the screenshot above, the “1607” version tells us that the version we’re running is from the 7th month (July) of 2016.

BTW from the command prompt you can directly ask to open winver and read the version number from the second line [3]...

winver

systeminfo

In systeminfo it is available the OS version (the one with the built number, e.g 10.0.18362) that you may compare with a list similar to the above one, and the Original Install Date. I don't know if for each major upgrade the Original Install Date value is updated (Remember that YYMM gives that number). At least as minimum you can reconstruct the first installed version on your machine.

A List [4,R]

Windows 10 (1903)       10.0.18362
Windows 10 (1809)       10.0.17763
Windows 10 (1803)       10.0.17134
Windows 10 (1709)       10.0.16299
Windows 10 (1703)       10.0.15063
Windows 10 (1607)       10.0.14393
Windows 10 (1511)       10.0.10586
Windows 10              10.0.10240  

Windows 8.1 (Update 1)  6.3.9600
Windows 8.1             6.3.9200
Windows 8               6.2.9200

Windows 7 SP1           6.1.7601
Windows 7               6.1.7600

Windows Vista SP2       6.0.6002
Windows Vista SP1       6.0.6001
Windows Vista           6.0.6000

Windows XP2             5.1.26003

You can read an updated version of the list on wikipedia page [R].

| improve this answer | |
  • If you're wanting just the number (say for displaying on a GUI) you can use (Get-ComputerInfo).WindowsVersion in PowerShell instead of using the property tag. Then you don't get the table format, either. But thanks, this is the solution I was looking for a couple weeks ago! – KGlasier Jan 24 at 20:38
  • @KGlasier or just Get-ComputerInfo WindowsVersion – SimonS Mar 6 at 15:06
9


For output-only Actual Version:

for /f tokens^=^3 %i in ('Reg Query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ReleaseId')do echo/%i|clip

  • Outputs:
1903


For add/set var in command line and send to output and your clipboard Crtl+C

for /f tokens^=^3 %i in ('Reg Query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ReleaseId')do echo/%i && set "_bildernumber=%i"
echo %_bildernumber%|clip

For add/set var in cmd/bat file and send output to your clipboard Crtl+C

@echo off

for /f tokens^=^3 %%i in ('Reg Query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ReleaseId')do echo/%%i && set "_bildernumber=%%i"
echo %_bildernumber%|clip
  • Or ...
@echo off

for /f tokens^=^3 %%i in ('
Reg Query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ReleaseId
')do echo/%%i && set "_bildernumber=%%i"
echo %_bildernumber%|clip
| improve this answer | |
6

You could also try the following in command prompt:

winver

Which should give you a pop-up window showing Version, Build and/or Service Pack numbers.

| improve this answer | |
  • 3
    This works perfectly. – spemble Jan 23 at 14:00
  • 5
    It is not clear by the current revision of the question but this is not actually want the author wanted. They wanted an output within the command and/or PowerShell prompt. There have been more than 3 answers deleted due this fact. While this detail was removed from the body for several reasons, the title of this question, makes the author's specific requirements clear. – Ramhound Jan 23 at 14:38
1

Cygwin

reg query 'HKLM\Software\Microsoft\Windows NT\CurrentVersion' |grep ReleaseId |sed -E 's/.* ([^ ]+)/\1/'

The reg query part is similar to other answers. grep ReleaseId finds the line with the Release ID.

sed -E 's/.* ([^ ]+)/\1/'

Using the sed POSIX regular expression syntax (-E) we match any characters followed by a space followed by a capturing group of one or more non-space characters. This will get the last field on the line (without -E it would require backslash escaping the parentheses and the plus sign). Substitute that captured group of non-space characters, which is the value we're looking for.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.