14

Like many Australians, I am on the NBN via FTTC. There is a white box that sits between my existing router and the phone line in my wall. The only name I can seem to find (both physically on the box and online) is FTTC Connection Device. It looks like this:

NBN FTTC Connection Device

The network architecture looks like this:

NBN FTTC home network architecture

  1. What is the generic name for this device? E.g., a router might be called a Nighthawk AX4 4-Stream WiFi 6 Router, but its generic name is just a router.
  2. What does this device actually do? Obviously it connects me somehow, but I'm after a more thorough answer.
  3. Is there a way to administer this device? Routers are usually administered via a web interface accessible via http://192.168.0.1 or something equivalent.
  4. What are the security implications of this device's presence? The opaqueness is certainly worrying.
4
  • 1
    I've just updated my answer with more correct info on G.fast support and the modem manufacturer.
    – Bob
    Jun 28, 2020 at 4:35
  • Very grateful for the detailed descriptions - it's surprisingly hard to find decent and coherent information on this.
    – jmcph4
    Jun 28, 2020 at 4:37
  • 1
    If you're interested in further detail and discussion, you can sometimes find that on the Whirlpool forums. itnews might also have info but it's more often NBN politics and rollout rather than purely technical.
    – Bob
    Jun 28, 2020 at 4:46
  • Also added a bit about the reverse powering, which is pretty unique to FTTC and another reason you can't use a generic VDSL modem.
    – Bob
    Jun 28, 2020 at 4:56

2 Answers 2

19

What is the generic name for this device? E.g., a router might be called a Nighthawk AX4 4-Stream WiFi 6 Router, but its generic name is just a router.

It is a modem.

On NBN FTTC, this is also known as the NCD.

I should also note that the "Nighthawk AX4 4-Stream WiFi 6 Router" you mention is actually a combination of a router, switch, and wireless access point. Many similar devices also include an ADSL or VDSL modem (which works on NBN FTTN but not FTTC).

What does this device actually do? Obviously it connects me somehow, but I'm after a more thorough answer.

More specifically, it is a VDSL2 modem preconfigured for NBN FTTC. Like any other modem, it acts as an interface between the analog signal travelling along the copper pair (your house lead-in) from the DPU in the pit, and an Ethernet network. On the OSI model, it acts on layers 1 and 2.

The DPUs are actually reverse-powered, which means your NCD is supplying power to the hardware in the pit. On first connection, this triggers the DPUs to disconnect you from the old phone network.

The modem also includes hardware for G.fast, though the aren't any concrete plans for that to be activated yet. Newer NBN FTTC DPUs also include G.fast hardware.

Specifically, this is custom made for NBN Co by NetComm.

Is there a way to administer this device? Routers are usually administered via a web interface accessible via http://192.168.0.1 or something equivalent.

The device certainly can be administered, but NBN Co in their infinite wisdom have decided to lock it down. You will not have any access from the local side.

What are the security implications of this device's presence? The opaqueness is certainly worrying

It can be considered as much a part of the ISP (NBN, not your RSP) network as the DPU in the pit outside, or whatever they have in their POIs. There's not much you can do about it. One hopes that they have properly secured the remote management interfaces (via VLAN or otherwise) but there is no easy way to prove it.

As a vague hand-wavey guess, it should generally be no less secure than the FTTP NTDs they provide.

3
  • I assume "DPU" is the device that sits at the 'C' of the 'FTTC' and provides the DSL signal? Is this pdf talking abou the same thing Jun 28, 2020 at 11:57
  • @user1686 Yes - in the case of the NBN, the "C" part is the pit outside a house. It's the bridge between fibre and copper.
    – Bob
    Jun 28, 2020 at 12:34
  • Question 3 about adminstration of the NCD is related to question 4. If it could be administered by residents, since the device stays at that postal address, there would be a more genuine concern for security implications.
    – stwr667
    Jun 29, 2020 at 0:03
0

I have done some checking and the NCD is a link/power supply for the NBN node, you can connect directly. However, you will be exposed as it runs simple firmware! No firewall or screening. No user interface! Via backend only or via console/cmd. I guess they use its mac address for account control.

If used directly, not all services work, as port control is limited! For example, my TV services and Foxtel would not work. It connects but faults out when attempting to stream. When I connected via the router, NBN compatible works well. I had a very expensive Linksys that would not work or had limited connection issues as it was not NBN compatible? So I used the provider's modem before my router as it has better WiFi with my Linksys router. I just turned WiFi off on the provider's router and all works great now! (NCD is tied to the site address. It’s meant to be left if you move. They should have created a login like ADSL as this will become a problem with people taking hardware, etc.)

I ran a series of IP and port scans while on NCD. It shows the whole street and various services running in the neighborhood.

With the NTD pugged into the NBN router from the service provider, then pugged into my Linksys EA9500 I get speeds 100-20mps at off-peak.

0

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .