3

I tried to install windows OpenSSH Server feature also tried to manually install OpenSSH in C:/Program Files/OpenSSH but for both when i try to connect it ask for password I enter correct but it says Permission denied always. It was working fine but after some time started to face this issue. I tried to manually run the sshd server with -d option and it gives the following logs

debug1: Remote protocol version 2.0, remote software version OpenSSH_7.9p1 Debian-10+deb10u2
debug1: match: OpenSSH_7.9p1 Debian-10+deb10u2 pat OpenSSH* compat 0x04000000
debug1: list_hostkey_types: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug1: kex: algorithm: curve25519-sha256 [preauth]
debug1: kex: host key algorithm: ecdsa-sha2-nistp256 [preauth]
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none [preauth]
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug1: rekey out after 134217728 blocks [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: Sending SSH2_MSG_EXT_INFO [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: rekey in after 134217728 blocks [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user aawais@domain service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: user domain\\aawais matched group list administrators at line 84
User domain\\aawais not allowed because shell c:\\program files\\powershell\\7\\pwsh.exe does not exist
debug1: userauth-request for user aawais@domain service ssh-connection method keyboard-interactive [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: keyboard-interactive devs  [preauth]
debug1: auth2_challenge: user=aawais@domain devs= [preauth]
debug1: kbdint_alloc: devices '' [preauth]
debug1: userauth-request for user aawais@domain service ssh-connection method password [preauth]
debug1: attempt 2 failures 1 [preauth]
debug1: Windows authentication failed for user: NOUSER domain: . error: 1326 

and following is my sshd_config file

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

#HostKey __PROGRAMDATA__/ssh/ssh_host_rsa_key
#HostKey __PROGRAMDATA__/ssh/ssh_host_dsa_key
#HostKey __PROGRAMDATA__/ssh/ssh_host_ecdsa_key
#HostKey __PROGRAMDATA__/ssh/ssh_host_ed25519_key

# Ciphers and keying
#RekeyLimit default none

# Logging
SyslogFacility AUTH
LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
MaxAuthTries 600
#MaxSessions 10

PubkeyAuthentication yes

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile  .ssh/authorized_keys

#AuthorizedPrincipalsFile none

# For this to work you will also need host keys in %programData%/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#PermitUserEnvironment no
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# no default banner path
#Banner none

# override default of no subsystems
Subsystem   sftp    sftp-server.exe

# Example of overriding settings on a per-user basis
#Match User anoncvs
#   AllowTcpForwarding no
#   PermitTTY no
#   ForceCommand cvs server

Match Group administrators
       AuthorizedKeysFile __PROGRAMDATA__/ssh/administrators_authorized_keys

What might be the cause of this problem?

3 Answers 3

2

The reason why you cannot login:

debug1: user domain\\aawais matched group list administrators at line 84
User domain\\aawais not allowed because shell c:\\program files\\powershell\\7\\pwsh.exe does not exist

Sshd checks validity of user before asking for password.

2
  • 2
    So how does the user solve their problem?
    – Ramhound
    Jul 16, 2020 at 21:47
  • 1
    @Yuri Thanks for the answer. This was the main problem. Jul 16, 2020 at 23:26
2

Default shell location was incorrect and I found this in server debug logs mentioned in question i-e

User domain\\aawais not allowed because shell c:\\program files\\powershell\\7\\pwsh.exe does not exist

execute following command to set default shell

New-ItemProperty -Path "HKLM:\SOFTWARE\OpenSSH" -Name DefaultShell -Value "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" -PropertyType String -Force

2
  • To help others, you should select this as the correct answer because it actually tells how to fix it - or @Yuri Ginsburg should alternatively edit the fix into his answer.
    – DocWeird
    Jul 17, 2020 at 9:45
  • Or the shorter reg add command: reg add HKLM\SOFTWARE\OpenSSH /v DefaultShell /d C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe
    – mivk
    Dec 1, 2020 at 19:05
-1

The issue may also be that you are using a "Microsoft" cloud account. There are two fixes to this issue:

  1. Log in with your Microsoft account password (i.e. the password for https://www.microsoft.com/) instead of the password that you log into your local machine with.

  2. Use a key for login instead of a password. (For example following the guide here: https://archive.is/VXPE8)

  3. Change your Microsoft account into a local account instead. Settings->Accounts->Your Info should look like this if you are using a local account.

enter image description here

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .