1

I received laptop (DELL Latitude E7450) with failing SSD. Windows stuck in boot-loop, with no standard repair/rescue tools working.

What I had done to this moment:

  1. I confirmed boot-loop.
  2. Bios recognizes SSD.
  3. Pre-boot diagnostics returned only SSD error:

Error Code: 2000-0142

  1. List item

Fortunately disk is readable and can be mounted in Linux (Lubuntu 20.10) booted from pendrive.

  • I've copied most important files to pendrive (using Lubuntu file manager).
  • I've checked SSD with gsmartcontrol. There are errors in short self test and extended self test. SMART attributes are unclear for me, so I would like to ask for your help in understanding health of the drive, source of possible problems and if it could be fixed or should I recommend buying a new drive.

Also, could you point out best command to copy all undamaged data from SSD to another drive? I'm pretty sure I have all important files, but I always prefer to copy whole drive just to be safe. I don't want to overstress damaged(?) SSD to the point of unrecoverable failure.

Bellow you'll have full gsmartcontrol report:


smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-25-generic] (local build)

=== START OF INFORMATION SECTION ===
Model Family:     SK hynix SATA SSDs
Device Model:     SK hynix SC300 mSATA 512GB
Serial Number:    FJ56N651311006P18
Firmware Version: 20001P00
User Capacity:    512,110,190,592 bytes [512 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      mSATA
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Mar 15 11:45:11 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x06) Offline data collection activity
                    was aborted by the device with a fatal error.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 118) The previous self-test completed having
                    the read element of the test failed.
Total time to complete Offline 
data collection:        (    2) seconds.
Offline data collection
capabilities:            (0x19) SMART execute Offline immediate.
                    No Auto Offline data collection support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    No Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                    entering power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    (  60) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   166   166   006    -    0
  5 Retired_Block_Count     -O--CK   253   253   036    -    0
  9 Power_On_Hours          -O--CK   093   093   000    -    6586
 12 Power_Cycle_Count       -O--CK   100   100   020    -    3806
100 Total_Erase_Count       -O--CK   100   100   000    -    10782675
171 Program_Fail_Count      -O--CK   100   100   000    -    1
172 Erase_Fail_Count        -O--CK   253   253   000    -    0
174 Unexpect_Power_Loss_Ct  ----CK   100   100   000    -    260
175 Program_Fail_Count_Chip -O--CK   100   100   000    -    1
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK   253   253   000    -    0
177 Wear_Leveling_Count     -O--CK   098   098   000    -    76
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   000    -    49
179 Used_Rsvd_Blk_Cnt_Tot   -O--CK   100   100   000    -    511
180 Erase_Fail_Count        -O--CK   100   100   000    -    8321
181 Non4k_Aligned_Access    -O--CK   100   100   000    -    1
182 Erase_Fail_Count_Total  -O--CK   253   253   000    -    0
183 SATA_Downshift_Count    -O--CK   100   100   000    -    2
187 Reported_Uncorrect      -O--CK   100   100   000    -    2336
188 Command_Timeout         -O--CK   253   253   000    -    0
191 Unknown_SSD_Attribute   -O--CK   253   253   000    -    0
194 Temperature_Celsius     -O----   030   000   000    -    30 (0 254 0 127 0)
195 Hardware_ECC_Recovered  -O--CK   100   100   000    -    20375846
201 Percent_Lifetime_Remain -OSR--   100   100   000    -    0
204 Soft_ECC_Correction     -OSR--   100   100   000    -    1
231 SSD_Life_Left           PO--CK   253   253   010    -    0
234 Unknown_SK_hynix_Attrib -O--CK   100   100   000    -    38951
241 Total_Writes_GiB        -O--CK   100   100   000    -    13632
242 Total_Reads_GiB         -O--CK   100   100   000    -    22696
250 Read_Retry_Count        -O--CK   100   100   000    -    190010
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      4  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL     R/O      2  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 65535 (device log contains only the most recent 20 errors)
    CR     = Command Register
    FEATR  = Features Register
    COUNT  = Count (was: Sector Count) Register
    LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
    LH     = LBA High (was: Cylinder High) Register    ]   LBA
    LM     = LBA Mid (was: Cylinder Low) Register      ] Register
    LL     = LBA Low (was: Sector Number) Register     ]
    DV     = Device (was: Device/Head) Register
    DC     = Device Control Register
    ER     = Error register
    ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 65535 [7] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 d8 00 00 00 73 dd 60 40 40     00:33:19.940  READ FPDMA QUEUED
  60 01 00 00 d0 00 00 00 73 dc 60 40 40     00:33:19.940  READ FPDMA QUEUED
  60 01 00 00 c8 00 00 00 73 db 60 40 40     00:33:19.940  READ FPDMA QUEUED
  60 01 00 00 c0 00 00 00 73 da 60 40 40     00:33:19.940  READ FPDMA QUEUED
  60 00 01 00 b8 00 00 00 73 d9 5f 40 40     00:33:19.940  READ FPDMA QUEUED

Error 65534 [6] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 30 00 00 00 73 d9 60 40 40     00:33:19.880  READ FPDMA QUEUED
  60 01 00 00 28 00 00 00 73 d8 60 40 40     00:33:19.880  READ FPDMA QUEUED
  60 00 01 00 20 00 00 00 73 d7 5f 40 40     00:33:19.880  READ FPDMA QUEUED
  60 00 01 00 18 00 00 00 73 d7 5e 40 40     00:33:19.880  READ FPDMA QUEUED
  60 00 01 00 10 00 00 00 73 d7 5d 40 40     00:33:19.880  READ FPDMA QUEUED

Error 65533 [5] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 c0 00 00 00 73 d6 60 40 40     00:33:19.810  READ FPDMA QUEUED
  60 01 00 00 b8 00 00 00 73 d5 60 40 40     00:33:19.810  READ FPDMA QUEUED
  60 01 00 00 b0 00 00 00 73 d4 60 40 40     00:33:19.810  READ FPDMA QUEUED
  60 01 00 00 a8 00 00 00 73 d3 60 40 40     00:33:19.800  READ FPDMA QUEUED
  60 01 00 00 a0 00 00 00 73 d2 60 40 40     00:33:19.800  READ FPDMA QUEUED

Error 65532 [4] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 98 00 00 01 20 41 a0 40 40     00:33:19.740  READ FPDMA QUEUED
  60 01 00 00 90 00 00 00 73 cc 60 40 40     00:33:19.740  READ FPDMA QUEUED
  60 01 00 00 88 00 00 00 73 cb 60 40 40     00:33:19.740  READ FPDMA QUEUED
  60 01 00 00 80 00 00 00 73 ca 60 40 40     00:33:19.740  READ FPDMA QUEUED
  60 01 00 00 78 00 00 00 73 c9 60 40 40     00:33:19.740  READ FPDMA QUEUED

Error 65531 [3] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 b8 00 00 00 73 b9 60 40 40     00:33:19.660  READ FPDMA QUEUED
  60 00 80 00 b0 00 00 00 73 b8 e0 40 40     00:33:19.660  READ FPDMA QUEUED
  60 00 20 00 a8 00 00 00 71 b8 e8 40 40     00:33:19.660  READ FPDMA QUEUED
  60 00 08 00 a0 00 00 00 71 b8 e0 40 40     00:33:19.660  READ FPDMA QUEUED
  60 00 08 00 98 00 00 01 74 12 58 40 40     00:33:19.660  READ FPDMA QUEUED

Error 65530 [2] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 28 00 00 00 73 dc 60 40 40     00:01:26.040  READ FPDMA QUEUED
  60 01 00 00 20 00 00 00 73 db 60 40 40     00:01:26.040  READ FPDMA QUEUED
  60 01 00 00 18 00 00 00 73 da 60 40 40     00:01:26.040  READ FPDMA QUEUED
  60 00 01 00 10 00 00 00 73 d9 5f 40 40     00:01:26.040  READ FPDMA QUEUED
  60 00 01 00 08 00 00 00 73 d9 5e 40 40     00:01:26.040  READ FPDMA QUEUED

Error 65529 [1] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 00 00 00 00 73 d8 60 40 40     00:01:25.970  READ FPDMA QUEUED
  60 00 01 00 f8 00 00 00 73 d7 5f 40 40     00:01:25.970  READ FPDMA QUEUED
  60 00 01 00 b8 00 00 00 73 d7 5e 40 40     00:01:25.970  READ FPDMA QUEUED
  60 00 01 00 b0 00 00 00 73 d7 5d 40 40     00:01:25.970  READ FPDMA QUEUED
  60 00 01 00 a8 00 00 00 73 d7 5c 40 40     00:01:25.970  READ FPDMA QUEUED

Error 65528 [0] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 78 00 00 00 73 d6 60 40 40     00:01:25.890  READ FPDMA QUEUED
  60 01 00 00 70 00 00 00 73 d5 60 40 40     00:01:25.890  READ FPDMA QUEUED
  60 01 00 00 68 00 00 00 73 d4 60 40 40     00:01:25.890  READ FPDMA QUEUED
  60 01 00 00 60 00 00 00 73 d3 60 40 40     00:01:25.890  READ FPDMA QUEUED
  60 01 00 00 58 00 00 00 73 d2 60 40 40     00:01:25.890  READ FPDMA QUEUED

Error 65527 [19] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 98 00 00 01 20 41 a0 40 40     00:01:25.820  READ FPDMA QUEUED
  60 01 00 00 90 00 00 00 73 cc 60 40 40     00:01:25.820  READ FPDMA QUEUED
  60 01 00 00 88 00 00 00 73 cb 60 40 40     00:01:25.820  READ FPDMA QUEUED
  60 01 00 00 80 00 00 00 73 ca 60 40 40     00:01:25.820  READ FPDMA QUEUED
  60 01 00 00 78 00 00 00 73 c9 60 40 40     00:01:25.820  READ FPDMA QUEUED

Error 65526 [18] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 40 00 00 00 73 b9 60 40 40     00:01:25.740  READ FPDMA QUEUED
  60 00 80 00 38 00 00 00 73 b8 e0 40 40     00:01:25.740  READ FPDMA QUEUED
  60 00 20 00 30 00 00 00 71 b8 e8 40 40     00:01:25.740  READ FPDMA QUEUED
  60 00 08 00 28 00 00 00 71 b8 e0 40 40     00:01:25.740  READ FPDMA QUEUED
  60 00 08 00 20 00 00 01 74 12 58 40 40     00:01:25.740  READ FPDMA QUEUED

Error 65525 [17] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.750  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.720  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.720  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.670  IDENTIFY DEVICE
  f5 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.600  SECURITY FREEZE LOCK

Error 65524 [16] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  00 -- 00 00 00 00 00 00 00 00 00 00 ff

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.750  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.720  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.720  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.670  IDENTIFY DEVICE
  f5 00 00 00 00 00 00 00 00 00 00 00 00     00:00:19.600  SECURITY FREEZE LOCK

Error 65523 [15] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 f8 00 00 02 4c 8c f0 40 40     09:28:50.970  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     09:28:50.970  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     09:28:50.970  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     09:28:50.970  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     09:28:50.970  IDENTIFY DEVICE

Error 65522 [14] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 d0 00 00 02 4c 8c f0 40 40     09:28:50.920  READ FPDMA QUEUED
  60 00 08 00 c8 00 00 02 4c 8d b0 40 40     09:28:50.920  READ FPDMA QUEUED
  60 00 08 00 c0 00 00 02 4c 8d a8 40 40     09:28:50.920  READ FPDMA QUEUED
  60 00 08 00 b8 00 00 02 4c 8d a0 40 40     09:28:50.920  READ FPDMA QUEUED
  60 00 08 00 b0 00 00 02 4c 8d 98 40 40     09:28:50.920  READ FPDMA QUEUED

Error 65521 [13] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 70 00 00 02 4c 8c f0 40 40     09:28:50.870  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     09:28:50.870  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     09:28:50.870  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     09:28:50.870  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     09:28:50.870  IDENTIFY DEVICE

Error 65520 [12] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 70 00 00 02 4c 8c f0 40 40     09:28:50.830  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     09:28:50.830  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     09:28:50.830  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     09:28:50.830  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     09:28:50.830  IDENTIFY DEVICE

Error 65519 [11] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 60 00 00 02 4c 8c f0 40 40     09:28:50.780  READ FPDMA QUEUED
  60 00 08 00 58 00 00 02 4c 8c e8 40 40     09:28:50.780  READ FPDMA QUEUED
  60 00 08 00 50 00 00 02 4c 8c e0 40 40     09:28:50.780  READ FPDMA QUEUED
  60 00 08 00 48 00 00 02 4c 8c d8 40 40     09:28:50.780  READ FPDMA QUEUED
  60 00 08 00 40 00 00 02 4c 8c d0 40 40     09:28:50.780  READ FPDMA QUEUED

Error 65518 [10] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 08 00 00 02 33 10 28 40 40     08:43:42.150  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     08:43:42.140  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     08:43:42.140  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     08:43:42.140  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     08:43:42.140  IDENTIFY DEVICE

Error 65517 [9] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 00 00 00 02 33 10 28 40 40     08:43:42.100  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     08:43:42.100  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     08:43:42.100  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     08:43:42.100  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     08:43:42.100  IDENTIFY DEVICE

Error 65516 [8] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 00 00 00 00 00 00 00 00 00  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 08 00 70 00 00 02 33 10 28 40 40     08:43:42.050  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 08 30 a0 a0     08:43:42.050  READ LOG EXT
  ef 00 10 00 02 00 00 00 00 00 00 a0 a0     08:43:42.050  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 00 00 00 00 00 e0 e0     08:43:42.050  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 00 00 00 00 00 a0 a0     08:43:42.050  IDENTIFY DEVICE

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       60%      6585         1309200
# 2  Extended offline    Completed: read failure       90%      6585         1309064
# 3  Short offline       Completed: read failure       60%      6585         1309200
# 4  Short offline       Completed: read failure       60%      6573         1309200
# 5  Short offline       Completed without error       00%         8         -
# 6  Short offline       Completed without error       00%         1         -

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (empty) ==
0x04  =====  =               =  ===  == General Errors Statistics (empty) ==
0x05  =====  =               =  ===  == Temperature Statistics (empty) ==
0x06  =====  =               =  ===  == Transport Statistics (empty) ==
0x07  =====  =               =  ===  == Solid State Device Statistics (empty) ==
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET

0

The disk is in a very bad shape, so don't even keep it online for longer than necessary to try and rescue the data.

The most problematic errors are (descriptions from Wikipedia SMART):

Error Name Value Description
187 Reported Uncorrectable Errors 2336 The count of errors that could not be recovered using hardware ECC
250 Read Error Retry Rate 190010 Count of errors while reading from a disk

The best tool for creating a clone of the disk is ddrescue. This answer might help if it takes too long.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.