Since I've assembled this PC a few months ago, I've seen this behavior. When I turn on the PC, its lights shine, the screen stays dark for around 5 seconds and then the Windows logon screen appears. No mobo logo, POST or anything, just a dark screen.
I've tried the methods below, with no luck:
- Pressing F2, Delete, Esc and other usual BIOS keys;
- Rebooting the PC using command
shutdown /r /fw
; - Using Control Panel, restarting the PC in troubleshoot mode then restarting again to access the BIOS.
The only thing that works is if I remove the battery, wait for about 2 minutes then reinstall it. When I do this, I can access the BIOS pressing Del and change the things I want. The restart happens as expected, with POST and boot logo. However, if I turn the PC off later in Windows, the next time the PC boots, the same odd stuff happens: black screen from the minute it's turned on to the end of the boot.
PC specs:
------------------
System Information
------------------
Time of this report: 8/23/2021, 09:07:18
Operating System: Windows 10 Home Single Language 64-bit (10.0, Build 19043) (19041.vb_release.191206-1406)
Language: Portuguese (Regional Setting: Portuguese)
Motherboard: ASUS Prime A-520M-A
System Model: System Product Name
BIOS: 2403 (type: UEFI)
Processor: AMD Ryzen 5 5600X 6-Core Processor (12 CPUs), ~3.7GHz
Memory: 16384MB RAM
Available OS Memory: 16300MB RAM
Page File: 7298MB used, 13353MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, no HDCP
Microsoft Graphics Hybrid: Not Supported
DirectX Database Version: 1.0.8
DxDiag Version: 10.00.19041.0928 64bit Unicode