I just reinstalled Windows XP - while it was installing I didn't notice that the mouse wasn't plugged in. Once the instalation was complete my mouse doesn't work. The pointer shows up when Windows starts, but it doesn't do anything when I move my mouse.

What should I do to fix it? Get a mouse driver or something?

This is what my mouse properties look like:

alt text


Windows has built in drivers for a mouse. If it is a PS/2 interface, you need to have it plugged in when the computer is booting, so you may just need to reboot.

If it is USB, you should just need to wait a few seconds.

If it still doesn't work, you may not have installed your computer's chipset drivers. These drivers usually include the drivers for the USB controller as well if Windows doesn't have one built in.

If that still doesn't work, try the mouse on a different computer. Your mouse may have coincidentally died at the same time that the machine was being reinstalled.

|improve this answer|||||
  • 3
    Hey, check this: i37.tinypic.com/4voi1y.png I managed to navigate with my keyboard there and make picture. There is no driver.. Also, I've the most simple mouse (not USB). I tried restarting computer with the mouse plugged in and it still didn't work. Yes, that mouse works on other computers. – Rihards Aug 17 '10 at 0:07
  • Oh, and clicking on troubleshooting or the other button didn't do anything.. – Rihards Aug 17 '10 at 0:19
  • I hate to say it, but it looks I will just need to reinstall my windows if there isn't any help to this.. – Rihards Aug 17 '10 at 0:22
  • Okay, reinstalling windows. sigh.. Lets see if it works then. – Rihards Aug 17 '10 at 0:23
  • 5
    @Richards - Are you using an nLite'd or other type of modded install? That's a rather odd problem for a vanilla install of Windows. – MDMarra Aug 17 '10 at 0:27

Try powering off the computer. Sometimes PC hardware will get into a state where a simple reboot isn't good enough. Shut it down, wait about 30 seconds, then power up. If the mouse still doesn't work, go into the Device Manager (Control Panel > Administrative Tools), find the mouse device and remove it, then restart.

|improve this answer|||||

Bad PS/2 port? Try booting up a Linux live CD and see if the mouse is detected. If not, you may have a hardware problem. Wouldn't be the first time I've heard of a port suddenly just failing (I've seen it with both PS/2 and USB where it works fine, then suddenly works no more).

|improve this answer|||||

Just a suggestion, but I would have your mouse plugged in while you reinstall Windows XP, and then Windows will know the mouse from the very beginning, and that might fix your problem...

|improve this answer|||||

If it is not a USB mouse, it has to be a P/S2 mouse. If you plug in a P/S2 device such as a keyboard or mouse while Windows is running, it will not recognize it. You have to reboot the computer with the device plugged in. Most but not all P/S2 devices are plug and play but yours may not be. Try running the Add Hardware applet in the Control Panel if Windows doesn't recognize your mouse.

|improve this answer|||||

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.