I have a hostgator account with ssh access enabled. When trying to upload the generated .pub key file with this command:

rsync -av -e "ssh -p2222" /home/user/.ssh/key.pub [email protected]:.ssh/authorized_keys

I keep getting:

Received disconnect from 2: Too many authentication failures for username
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7]

I've been toying around previously with ssh until I got the auth failure. But now it seems that the auth failure counter does not reset (been waiting more than 12 hours now, tech support "supposes" it resets after 30 min to 1 hour, and another guy told me "it resets every time you try to login with the username", jeesh).

This is driving me nuts. I even had this set up in a Slicehost custom server and had fewer issues than with these guys.

Any tips? Perhaps it's something client side and not server side.

  • In my case there wa an mistake in generating the key. I generated a key and I missed to mention the source adress and used username at the end of the key.
    – Reporter
    Commented Aug 29, 2019 at 12:49

15 Answers 15


This is usually caused by inadvertently offering multiple ssh keys to the server. The server will reject any key after too many keys have been offered.

You can see this for yourself by adding the -v flag to your ssh command to get verbose output. You will see that a bunch of keys are offered, until the server rejects the connection saying: "Too many authentication failures for [user]". Without verbose mode, you will only see the ambiguous message "Connection reset by peer".

To prevent irrelevant keys from being offered, you have to explicitly specify this in every host entry in the ~/.ssh/config (on the client machine) file by adding IdentitiesOnly like so:

Host www.somehost.com
  IdentityFile ~/.ssh/key_for_somehost_rsa
  IdentitiesOnly yes
  Port 22

If you use the ssh-agent, it helps to run ssh-add -D to clear the identities.

If you are not using any ssh hosts configuration, you have to explicitly specify the correct key in the ssh command like so:

ssh -i some_id_rsa -o 'IdentitiesOnly yes' them@there:/path/

Note: the 'IdentitiesOnly yes' parameter needed to be between quotes.


ssh -i some_id_rsa -o IdentitiesOnly=yes them@there:/path/
  • 5
    it is not clear to me where to put this line. On the server that I am trying to log in to, .ssh/config only has information for other servers. Do you mean that this should go in the .ssh/config file on the computer I am trying to ssh from? If so, this is unclear because your answer says "once you are logged back in ..." Commented Jun 7, 2012 at 17:39
  • 2
    I have to put the option in double quotes, like this: ssh -i some_id_rsa -o "IdentitiesOnly yes" them@there:/path/
    – knb
    Commented Apr 23, 2013 at 9:22
  • 1
    Windows users running PAGENT (Putty Agent), check to ensure you only have the keys you need loaded. I ran into this issue after accidentally loading ALL my private keys. Commented Nov 19, 2013 at 22:41
  • 6
    The question remains: why does ssh "offer multiple keys" (anything under ~/.ssh) even when the rule for host has an explicit IdentityFile /path/to/private_key_file setting. Shouldn't this explicitly specified key be (at the very least) offered first? Isn't this a bug/misfeature in the openssh client?
    – arielf
    Commented Jan 26, 2017 at 0:33
  • 3
    But shouldn't it use the key specified with the IdentityFile option? For example, without the IdentitiesOnly option, it tries to use my github key when I try to ssh gitlab.com. It makes no sense. Commented Oct 8, 2018 at 14:57

I found an easier way to do this (if using password authentication):

ssh -o PubkeyAuthentication=no [email protected]

This forces non-key authentication. I was able to logon immediately.


  • 3
    +1, wish i could give you more. Raspberry Pi is the only device I ssh into without public key. Was getting: "Too many authentication failures for pi"
    – blak3r
    Commented Dec 22, 2013 at 7:05
  • 1
    And to use that with rsync: rsync -av -e 'ssh -o PubkeyAuthentication=no' '[email protected]:~/remote_file' 'local_file' Commented Mar 9, 2016 at 17:03
  • 2
    You can also create an Alias to make it even quicker for password auth. alias sshp='ssh -o PubkeyAuthentication=no '
    – dhempler
    Commented Apr 27, 2017 at 14:59

I was getting this error too and found that it was happening b/c the server was configured to accept up to 6 tries:

#MaxAuthTries 6

In addition to setting the IdentitiesOnly yes in your ~/.ssh/config file you have a couple of other options.

  1. Increase the MaxAuthTries (on the ssh server)
  2. delete some of the key pairs you have present in your ~/.ssh/ directory & run ssh-add -D
  3. explicitly link a key to a given host in your ~/.ssh/config file

Like so:

host foo
hostname foo.example.com
IdentityFile /home/YOU/.ssh/foo
  1. Is probably not a good way to go about it, given it weakens your ssh server a bit since it'll now accept more keys in a given connection attempt. Think brute force attack vectors here.

  2. Is a good way to go assuming you have keys that are not needed and can be permanently deleted.

  3. And the approach of setting IdentitiesOnly are probably the preferred ways of dealing with this issue!

  • In your last line you have identifyfile /home/YOU/.ssh/foo but it should be identityfile (a t not an f)
    – Nin
    Commented Sep 26, 2014 at 10:05
  • 2
    In my case, just running ssh-add -D on my machine worked. Thanks! Commented Aug 20, 2020 at 16:57

I added to ~/.ssh/config this:

Host *
IdentitiesOnly yes

It enables option IdentitiesOnly=yes by default. If you'll need to connect with private key, you should specify it with option -i


If you get the following SSH Error:

$ Received disconnect from host: 2: Too many authentication failures for root

This can happen if you have (default on my system) five or more DSA/RSA identity files stored in your .ssh directory and if the '-i' option isn't specified at the command line.

The ssh client will first attempt to login using each identity (private key) and next prompt for password authentication. However, sshd drops the connection after five bad login attempts (again default may vary).

If you have a number of private keys in your .ssh directory you can disable "Public Key Authentication" at the command line using the '-o' optional argument.

For example:

$ ssh -o PubkeyAuthentication=no root@host
  • This was exactly what was happening to me! Thanks a lot for the explanation ;) Commented Oct 4, 2016 at 13:59
  • 1
    That's a fine workaround. But, you are really best setting up public/private key authentication, and disabling the root password. Allowing ssh via password generally opens the system up to brute-force attacks, which is especially bad for root. And, if you have root, you have the privileges to make those changes. Just food for thought.
    – Randall
    Commented Aug 25, 2022 at 13:50
  • I concur with Randall here. By turning off pubkey auth you are decreasing your security. Do not do this! The workaround is bad, given that the IdentitiesOnly Fix exists and is trivial to use. Commented Jan 2, 2023 at 16:27

If you have a password, and want to simply use the password to login, here is how you do it.

To use ONLY password authentication and NOT use Public-key, and NOT use the somewhat misleading "keyboard-interactive" (which is a superset including password), you can do this from the command line:

ssh -o PreferredAuthentications=password [email protected]

Going off @David saying, just add this IdentitiesOnly yes to your .ssh/config, it does the same thing as ssh -o PubkeyAuthentication=no.

After you logged in, remove .ssh/authorized_keys. Now, go back to the local machine and type the following

cat ~/.ssh/id_rsa.pub | ssh -o PubkeyAuthentication=no user@IP_ADDR 'cat >> .ssh/authorized_keys'. This should re-enable your ssh with public key


I know this is an old thread, but I just wanted to add in here that I ran into the same error message, but it was caused by the owner of the .ssh folder being root rather than the user that was using the key. I corrected the issue by running the following commands:

sudo chown -R user:user /home/user/.ssh

I also made sure the permissions were correct on the .ssh folder:

sudo chmod 700 /home/user/.ssh

The files within the .ssh directory should have the permission of 600:

sudo chmod 600 /home/user/.ssh/authorized_keys
  • I would be careful with using this without a caveat. SSH key permissions are usually restricted to 400 for some keys, particular AWS. Attempting to set them above that will result in the key not being accepted, and that can lock you out of your AWS account. Commented Mar 9, 2017 at 18:35

In my case, the problem was directory permissions. This fixed it for me:

$ chmod 750 ~;chmod 700 ~/.ssh

Too many authentication failures

This message is caused by having too many failed authentication attempts given the permitted limits enforced on the remote SSH server. This potentially means that you've too many identities added in the SSH agent.

Here are few suggestions:

  • Add -v to see if that's the case (you've using too many identities).
  • List added identities by ssh-add -l.
  • Remove failing identity from the agent by: ssh-add -d.
  • You may also deletes all identities by ssh-add -D and re-add only relevant one.
  • If you've access to SSH server, check the MaxAuthTries option (see: man sshd_config).

    Related post: What is a connection for sshd_config's 'MaxAuthTries' limit?

  • If none of this help, make sure whether you're using the right credentials or file.


This was a fun one for me. Turns out I changed my password locally while in a localization mode different from a keyboard I was using to login remotely. This effectively made my password different from what I thought it was probably because one of my special characters was different from what the keyboard said it was.


Smart cards (aka PIV, CAC, PKCS #11, HSM, or Cryptoki) add an additional level of complexity to this.

As John T suggests, I added the -v verbose logging to my ssh command to find why my ssh was failing. Whether I put in -i ~/.ssh/myrsa.pem or -o 'IdentitiesOnly yes' or even -o 'CertificateFile ~/.ssh/myrsa.pem', I still got the "Too many authentication failures" error from the system because it was still insisting on using opensc-pkcs11.so to present the certificate from the smartcard, which is not recognized by my personal EC2 instance.

Removing the smartcard let it drop back to RSA authentication. But, as a better workaround, to keep the smartcard in the system and still have ssh work with my RSA key, I can pass
-o PKCS11Provider = PKCS_disabled
on the command lineto my ssh command, and it will override the global ssh default.

It's still a workaround, since it will try to open a .so file for PKCS, and give you the error
dlopen PKCS_disabled failed: PKCS_disabled: cannot open shared object file: No such file or directory
but that creates an understandable error that forces it to fall back to RSA without having to pull my smartcard in and out.


In my case, it was happening because I was using the username "ubuntu", but the username in this instance was "ec2-user"

After I did what "John T" suggested, I got this error:

Permission denied (publickey).

Then I found the solution (i.e. changing the username to "ec2-user") in this answer: https://stackoverflow.com/questions/1454629/aws-ssh-access-permission-denied-publickey-issue


I had my public key in .ssh/authorized_keys2, but the server was configured to read only .ssh/authorized_keys:

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys

After moving my file to .ssh/authorized_keys, I can log in successfully with my key.


This message can appear when the correct username and password is not entered.

First check that the user is listed:

vim /etc/passwd

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .